Introduction
This manual provides essential information for the safe and efficient operation of your Electro-Voice ZLX-12BT-US powered loudspeaker. Please read thoroughly before use to ensure proper setup and to maximize the performance and longevity of your equipment.

Сүрөт 1: Алдыңкы view of the ZLX-12BT-US powered loudspeaker.
Коопсуздук маалыматы
- Always connect the loudspeaker to a grounded power outlet.
- Do not expose the loudspeaker to rain or moisture.
- Ашыкча ысып кетүүнүн алдын алуу үчүн туура желдетүүнү камсыз кылыңыз.
- Бардык тейлөөлөрдү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.
- Do not remove the cover or attempt to service the unit yourself.
Жайгашуу
Пакеттен чыгаруу
Carefully remove the loudspeaker from its packaging. Inspect for any signs of damage during transit. Retain the original packaging for future transport or storage.
Жайгаштыруу
- Place the loudspeaker on a stable, flat surface or mount it securely using appropriate hardware (not included).
- Желдетүү үчүн түзмөктүн айланасында жетиштүү орун бар экенине ынаныңыз.
- Катуу сүйлөткүчтү жылуулук булактарынын жанына же тике күн нуруна коюудан алыс болуңуз.
Байланыштар
The ZLX-12BT-US features various input and output options. Ensure all connections are secure before powering on the unit.
- Кубат туташуу: Connect the provided power cable to the AC inlet and a suitable power source.
- Аудио киргизүү: Use XLR or 1/4-inch TRS cables to connect audio sources (mixers, microphones, instruments) to the input jacks.
- Аудио чыгаруу: Use the XLR output to link multiple loudspeakers or send the signal to another audio device.
- Bluetooth жупташууда:
- Аудио түзмөгүңүздө Bluetooth'ду жандырыңыз.
- Press the Bluetooth button on the loudspeaker's control panel.
- Select "ZLX-12BT" from your device's Bluetooth list.
- A confirmation tone will sound upon successful pairing.

Figure 2: Rear panel with connection points and control interface (illustrative).
Иштөө нускамалары
Күйгүзүү/өчүрүү
Press the power switch located on the rear panel to turn the unit on or off. The power LED on the front will illuminate when the unit is on.
Үндү көзөмөлдөө
Adjust the master volume knob on the rear panel to control the overall output level. Individual input levels can also be adjusted.
DSP алдын ала орнотуулары
The ZLX-12BT-US includes several Digital Signal Processing (DSP) presets optimized for different applications (e.g., Music, Live, Speech, Club). Use the menu and control knob to select the desired preset.
Bluetooth аудио агымы
Once paired, audio from your Bluetooth device will stream directly to the loudspeaker. Adjust the Bluetooth input level on the loudspeaker and the volume on your device.
Техникалык тейлөө
- Тазалоо: Сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Тор: Periodically check the front grille for dust or debris and gently clean if necessary to maintain optimal sound quality.
- Сактагыч: When not in use for extended periods, store the loudspeaker in a dry, cool environment, preferably in its original packaging.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Үн чыгышы жок | Power not connected; volume too low; incorrect input selection; faulty cable. | Check power connection and switch; increase volume; verify input source; test with different cables. |
| Bluetooth жупташкан жок | Bluetooth not enabled on device; loudspeaker not in pairing mode; device too far. | Ensure Bluetooth is on and device is discoverable; press Bluetooth button on loudspeaker; move device closer. |
| Бузулган аудио | Input level too high; master volume too high; faulty audio source. | Reduce input gain and master volume; test with a different audio source. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | ZLX-12BT-US |
| Power Output | 1000 Вт (чоку) |
| Вуфердин өлчөмү | 12 дюйм |
| Байланыш | Bluetooth Audio Streaming, XLR/TRS Combo Inputs, XLR Output |
| DSP | Integrated with multiple presets |
| Орнотуу ыкмасы | Өз алдынча |
| Origin | Материк Кытай |
Колдонуучу сунуштар
- For optimal sound, experiment with different DSP presets to match your environment and audio content.
- When using Bluetooth, ensure your device is within range for a stable connection to prevent audio dropouts.
- Always start with low volume levels on both the loudspeaker and your audio source, then gradually increase to prevent sudden loud noises and potential damage.
Кепилдик жана колдоо
For detailed warranty information and technical support, please refer to the official Electro-Voice website or contact your authorized dealer. Keep your proof of purchase for any warranty claims or service requests. After-sale services are available for technical support or customer service inquiries.





