Introduction
The DEWALT DWST83471 TOUGHSYSTEM 2.0 Charging Box is a robust and versatile solution designed for professionals requiring efficient battery charging and secure tool storage. This unit integrates a dual charger for 18V XR and 54V Flexvolt batteries within a durable, waterproof, and dustproof case. It also features convenient USB charging ports for mobile devices and is fully compatible with the TOUGHSYSTEM 2.0 modular storage system.

Image: DEWALT TOUGHSYSTEM 2.0 Charging Box with lid open, revealing the integrated dual charger.
Маанилүү коопсуздук маалыматы
Сураныч, бул продуктуну иштетүүдөн мурун бардык коопсуздук нускамаларын окуп, түшүнүңүз. Бул нускамаларды аткарбоо электр шокуна, өрткө же олуттуу жаракатка алып келиши мүмкүн.
Жалпы коопсуздук чаралары
- Always connect the charging box to a grounded power outlet.
- Do not expose the charging box to rain or wet conditions unless the lid is securely closed and latched, ensuring the IP65 seal is effective.
- Do not operate the charger if it has received a sharp blow, been dropped, or damaged in any way. Take it to an authorized service center.
- Do not disassemble the charging box. Refer all servicing to qualified service personnel.
- Ensure adequate ventilation around the charging box during operation. The built-in fan helps prevent overheating, but do not block air vents.
- Балдарды жана уруксатсыз адамдарды заряддоочу жайга жакын жерде кармаңыз.
Батареянын коопсуздугу
- Only charge DEWALT 18V XR and 54V Flexvolt batteries in this unit.
- Кайра заряддалбаган батарейкаларды заряддабаңыз.
- Do not incinerate or mutilate batteries; they can explode.
- Батареянын терминалдарын кыска туташтырбаңыз.
- Батареяларды салкын, кургак жерде, күндүн нуру түз тийбеген жана ашыкча ысыктан алыс сактаңыз.
Пакеттин мазмуну
Your DEWALT DWST83471 TOUGHSYSTEM 2.0 Charging Box package should include:
- 1 x DEWALT DWST83471 TOUGHSYSTEM 2.0 Charging Box
Note: Batteries and mobile devices are not included and must be purchased separately.

Image: The DEWALT TOUGHSYSTEM 2.0 Charging Box in its closed state.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд аты | ДЕВАЛЬТ |
| Модель номери | DWST83471 |
| Type | Case (Charging Box) |
| Материал | Пластик |
| Origin | Материк Кытай |
| Продукциянын өлчөмдөрү | 14.57"D x 10.63"W x 9.84"H |
| Батарея шайкештиги | DEWALT 18V XR / 54V Flexvolt |
| Заряддоо агымы | 4 Ampс (батарея үчүн) |
| USB заряддоо порттору | 1x Type-A, 1x Type-C |
| Айлана-чөйрөнү коргоо | IP65 Certified (Dustproof, Water-resistant when closed) |
| Системанын шайкештиги | TOUGHSYSTEM 2.0 |
Орнотуу колдонмосу
Пакеттен чыгаруу
Carefully remove the charging box from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain packaging for future storage or transport.
Жайгаштыруу
Place the charging box on a stable, flat surface in a well-ventilated area. Ensure that the air vents are not obstructed to allow for proper heat dissipation during charging.
Кубатка туташуу
Connect the charging box's power cord to a suitable grounded electrical outlet. The unit is now ready for operation.
Иштөө нускамалары
Charging DEWALT Batteries
- Open the lid of the charging box.
- Insert up to two DEWALT 18V XR or 54V Flexvolt batteries into the designated charging slots. Ensure they are securely seated.

Image: A user inserting a DEWALT battery into the charging box.
- The charging indicator lights, visible both with the lid open and closed, will illuminate to show the charging status of each battery.
- A built-in fan will activate as needed to prevent batteries and the charger from overheating, even when the lid is closed.
- Once charging is complete, the indicator lights will change (refer to specific battery charger manual for light patterns). Remove batteries when fully charged.

Image: The charging box with batteries inserted and charging (Batteries Not Included).
USB заряддоо портторун колдонуу
The charging box is equipped with two USB ports for charging mobile devices:
- 1x Type-A USB port
- 1x Type-C USB port
Connect your mobile device's charging cable to the appropriate USB port on the side of the charging box. Ensure the charging box is connected to a power source for USB charging functionality.

Image: Detail of the USB-A and USB-C charging ports.
Батареяны сактоо
The charging box provides ample storage space for batteries not currently in use or charging. It can accommodate up to 14 18V 5Ah XR batteries. Securely close and latch the lid to protect stored batteries from environmental elements.

Image: Detail of the robust handle and metal latches for secure closure.
TOUGHSYSTEM 2.0 Compatibility
The DWST83471 Charging Box is a half-module size and is fully compatible with other DEWALT TOUGHSYSTEM 2.0 modules. It can be easily stacked and connected with other medium-sized or standard TOUGHSYSTEM boxes for integrated storage and transport.

Image: The charging box stacked on another TOUGHSYSTEM 2.0 module (Batteries Not Included).

Image: A user engaging the side latches to connect TOUGHSYSTEM modules.
Техникалык тейлөө
Тазалоо
Regularly clean the exterior of the charging box with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the plastic.
Ensure the charging slots and USB ports are free from dust and debris. Use compressed air if necessary, but ensure the unit is unplugged.
Текшерүү
Periodically inspect the power cord, plug, and the charging box itself for any signs of damage, wear, or loose connections. If any damage is found, discontinue use and contact an authorized service center.
Сактагыч
When not in use, store the charging box in a clean, dry environment. Ensure the lid is securely latched to maintain its IP65 rating.

Сүрөт: алдыңкы view of the DEWALT TOUGHSYSTEM 2.0 Charging Box.
Проблемаларды чечүү
Batteries Not Charging
- Кубат жок: Ensure the charging box is securely plugged into a live electrical outlet.
- Battery Not Seated: Verify that the batteries are fully inserted into the charging slots.
- Бузулган батарея: Inspect the battery for any visible damage. Do not attempt to charge damaged batteries.
- Заряддоочу түзүлүштүн бузулушу: If the issue persists with multiple batteries and a confirmed power source, the charger may require servicing.
USB Devices Not Charging
- Кубат жок: The charging box must be connected to a power source for USB charging to function.
- Cable Issue: Кабелдин бузулушуна жол бербөө үчүн башка USB кабелин колдонуп көрүңүз.
- Түзмөктүн шайкештиги: Ensure your device is compatible with standard USB charging.
Ашыкча ысып кетүү
- Бөгөттөлгөн желдеткичтер: Ensure the air vents on the charging box are not obstructed. The internal fan requires clear airflow.
- Курчап турган чөйрөнүн температурасы: Operating in extremely hot environments can affect charging performance. Move to a cooler area if possible.
Колдонуучу сунуштар
- Сактагычты көбөйтүү: The spacious interior allows for storage of up to 14 18V 5Ah XR batteries, making it an excellent portable power station for job sites.
- Keep it Closed: The built-in fan and IP65 rating mean you can charge batteries with the lid closed, protecting them from dust and moisture while maintaining optimal charging temperatures.
- Байланышта болуңуз: Utilize the integrated USB-A and USB-C ports to keep your phone, tablet, or other USB-powered devices charged on the go.
- Modular Advantage: Leverage the TOUGHSYSTEM 2.0 compatibility by stacking and latching this charging box with other DEWALT storage modules for a customized and secure transport solution.

Image: Another front view of the DEWALT TOUGHSYSTEM 2.0 Charging Box.
Кепилдик жана колдоо
For warranty information, technical support, or service inquiries regarding your DEWALT DWST83471 TOUGHSYSTEM 2.0 Charging Box, please refer to the official DEWALT webсайтына же DEWALT кардарларды тейлөө кызматына түздөн-түз кайрылыңыз. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.





