ILM Smart Bike Helmet E3-12LS User Manual

1. Киришүү

Thank you for choosing the ILM Smart Bike Helmet E3-12LS. This helmet is designed to provide enhanced safety and convenience for riders of e-bikes, e-scooters, mopeds, skateboards, and other light electric vehicles. It integrates advanced features such as LED lighting, automatic brake warnings, turn signals, and optional Bluetooth connectivity, all while meeting stringent safety standards.

2. Коопсуздук маалыматы

Your safety is paramount. Please read and understand all safety instructions before using the helmet.

• This helmet is certified to NTA-8776, CE, and CPSC standards, offering protection against higher impact speeds up to 28mph and covering a larger part of the head compared to standard bicycle helmets.
• Always ensure the helmet is properly fitted and the chin strap is securely fastened before riding.
• The automatic brake lights and turn signals are designed to enhance visibility but should not replace standard hand signals or careful riding practices.
• The light control function automatically adjusts to ambient light, but always ensure your lights are functioning correctly before riding, especially in low-light conditions.
• Do not modify the helmet in any way, as this may compromise its protective capabilities.

3. Продукт бүтүп калдыview

The ILM Smart Bike Helmet E3-12LS combines robust protection with intelligent features for a safer and more enjoyable ride.

Негизги өзгөчөлүктөрү:

• Өркүндөтүлгөн коопсуздук: PC shell and impact-absorbing EPS material, NTA-8776, CE, CPSC certified.
• Интегралдык жарыктандыруу: Front LED light, automatic brake warning light, and tilt-activated turn signals.
• Автоматтык жарыкты башкаруу: Lights adjust automatically based on ambient light intensity (activates at night or in low light).
• Optional Bluetooth 5.0: Built-in microphone and speaker for music and calls (available on Bluetooth models).
• Ажыратылуучу Visor: UVA protective, shields against dust and flying debris.
• Comfort & Hygiene: Multiple aerodynamic air vents, quick-release chin strap, and removable, washable padding.

Компоненттери:

• Фара: Front-facing LED light for visibility.
• Ажыратылуучу Visor: Clear or tinted visor for eye protection.
• Тез чечилүүчү боо: Adjustable chin strap with a quick-release buckle.
• EPS Thickness & Foam Pads: Internal cushioning for impact absorption and comfort.
• Аба желдеткичтери: Strategically placed openings for ventilation.
• Арткы жарык: Rear LED light for visibility, brake warning, and turn signals.
• Size Adjuster: Rear dial for fine-tuning helmet fit.
• Tow Locks: (Specific to some models, refer to diagram).
• Bluetooth модулу: (Optional, for Bluetooth-enabled models) Integrated microphone and speaker.

4. Техникалык шарттар

5. Орнотуу нускамалары

5.1. Fitting the Helmet

1. Туулганы башыңызга кийиңиз, ал тегиз жайгашып, чекеңизди жаап турганын текшериңиз.
2. Adjust the rear size adjuster dial (Figure 1) until the helmet feels snug and comfortable, without being too tight. The helmet should not move freely when you shake your head.
3. Fasten the quick-release chin strap (Figure 1). Adjust the straps so they form a 'V' shape under your ears and the buckle sits comfortably under your chin. Ensure there is enough room for one finger between the strap and your chin.

5.2. Attaching/Detaching the Visor

The helmet comes with a detachable black visor. To attach or detach:

1. Align the visor's attachment points with the corresponding slots on the helmet (Figure 1, Figure 4).
2. Ал ордуна чыкылдаган үн чыкканча акырын басыңыз.
3. To detach, apply gentle outward pressure on the attachment points and pull the visor away from the helmet.

5.3. Charging (for LED lights and Bluetooth)

The helmet's smart features are powered by an internal battery. Connect the helmet to a standard USB charger using the provided charging cable. An indicator light will show charging status (e.g., red for charging, green for fully charged).

5.4. Bluetooth Pairing (Optional, for Bluetooth models)

1. Ensure your helmet is charged.
2. Turn on the helmet's power (usually by pressing and holding the main power button).
3. Activate Bluetooth on your mobile phone or other device.
4. Издөө available devices and select the ILM helmet (e.g., "ILM Helmet E3-12LS").
5. Once paired, you can play music or answer calls through the helmet's integrated speakers and microphone.

6. Иштөө нускамалары

6.1. Powering On/Off and Light Control

The helmet features intelligent light control and manual light modes:

• Автоматтык жарыкты башкаруу: After the main board is switched on, the front and rear lights will automatically light up at night or in similar low-light situations. They will not light up in the daytime.
• Manual Light Modes:
  1. Биринчи басма: The front light is constantly on, and the rear light is flashing.
  2. Экинчи басма: The front light remains on, and the rear light cycles through three modes: constant light, marquee, and flashing.
  3. Үчүнчү Басма: The front light remains on, and the rear light will flash.

6.2. Automatic Brake Lights

When emergency braking occurs, the rear lights will automatically increase to 100% brightness to warn vehicles approaching from behind. This feature is active when the helmet is powered on.

6.3. Бурулуш сигналдары

The helmet is equipped with tilt-activated turn signals:

• If your head is tilted to the left by more than 15 degrees, the left turn signal will remain on for 10 seconds.
• If your head is tilted to the right by more than 15 degrees, the right turn signal will remain on for 10 seconds.

Note: Turn signals do not work in daytime conditions.

6.4. Bluetooth Operation (Optional)

For models with Bluetooth capability:

• Музыка ойнотуу: Once paired with your device, music will stream directly to the helmet's speakers. Use your device to control playback (play/pause, skip tracks).
• Чалууларга жооп берүү: Incoming calls can be answered via a button on the helmet (refer to specific model instructions for button location) or directly from your paired phone. The integrated microphone allows for hands-free communication.

7. Техникалык тейлөө

7.1. Туулганын кабыгын тазалоо

• жумшак кездеме колдонуу dampened with mild soap and water to clean the exterior PC shell.
• Avoid abrasive cleaners or solvents, as these can damage the helmet's finish and materials.
• Allow the helmet to air dry completely before storage or next use.

7.2. Visor Care

• Clean the visor with a soft, lint-free cloth and clean water. For stubborn dirt, use a specialized visor cleaner.
• Do not use paper towels or harsh chemicals, which can scratch or damage the visor's coating.
• Store the helmet in a way that protects the visor from scratches.

7.3. Removable and Washable Padding

• The internal padding can be removed for cleaning (Figure 6).
• Hand wash the padding with mild soap and water.
• Rinse thoroughly and allow to air dry completely before reinserting into the helmet.

7.4. Батареяга кам көрүү

• Charge the helmet regularly, even if not in frequent use, to maintain battery health.
• Заряддоо жана сактоо учурунда өтө жогорку температурадан алыс болуңуз.

8. Кыйынчылыктарды

8.1. Lights Not Working

• Батареяны текшерүү: Ensure the helmet is sufficiently charged.
• Айланадагы жарык: Remember that the automatic light control function will not activate lights in bright daytime conditions. Try testing in a darker environment.
• Кубат баскычы: Ensure the main power button for the lights is switched on.

8.2. Bluetooth Connectivity Issues (for Bluetooth models)

• Helmet Power: Ensure the helmet is powered on and Bluetooth is active.
• Түзмөктүн Bluetooth: Ensure Bluetooth is enabled on your phone/device.
• Жакындык: Keep your device close to the helmet during pairing.
• Кайра жупташтыруу: Try unpairing and re-pairing the helmet with your device.

8.3. Brake/Turn Signals Not Activating

• Батарея деңгээли: Low battery might affect sensor functionality. Charge the helmet.
• Ийилген бурч: Ensure you are tilting your head sufficiently (more than 15 degrees) for turn signals to activate.
• Күндүз: Turn signals do not work in daytime conditions.

9. Колдонуучунун кеңештери

• For optimal visibility, especially in urban environments, consider using the manual light modes to keep your lights on even during twilight hours.
• Regularly check the fit of your helmet, especially after long rides or if you've adjusted your hairstyle. A snug fit is crucial for safety.
• If you have a Bluetooth model, fully charge it before long rides to ensure continuous music and call functionality.

10. Кепилдик жана колдоо

For warranty information, technical support, or any questions regarding your ILM Smart Bike Helmet, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.