Boly DC кабели 2 жана орнотуу кронштейни боюнча колдонмо

Introduction

This manual provides instructions for the proper installation and use of the Boly DC Cable 2 and its accompanying mounting bracket. This accessory set is designed to provide external power connectivity and secure mounting for compatible Boly hunting trail cameras, ensuring reliable operation in outdoor environments.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1 x Boly Mounting Bracket
• 1 x Boly DC Cable 2 (200cm length, 4.0*1.7mm plug size)
• Necessary mounting hardware (screws, washers, nuts)

Техникалык шарттар

Орнотуу нускамалары

1. Кронштейнди орнотуу:

   Select a sturdy tree or wooden post for mounting your trail camera. Position the bracket at the desired height and angle. Use the provided screws and hardware to securely fasten the bracket to the surface. Ensure the bracket is stable and can support the weight of your camera.

   

   

2. Attaching the Camera to the Bracket:

   Once the bracket is firmly in place, attach your compatible Boly trail camera to the bracket using the camera's standard mounting screw hole. Adjust the camera's position as needed for optimal field of view.

3. Connecting the DC Cable:

   The DC Cable 2 allows you to connect your trail camera to an external power source (e.g., a 6V or 12V battery, depending on your camera's requirements).

   • Insert the 4.0*1.7mm DC plug into the power input port of your Boly trail camera.
   • Connect the spade connectors at the other end of the DC cable to your external power source. Ensure correct polarity (red to positive, black to negative).

   

   

   The DC cable connection point on the camera features a waterproof design to protect against environmental elements.

   

Иштөө нускамалары

Once the DC Cable 2 and mounting bracket are installed, your Boly trail camera is ready for extended operation using an external power source.

1. Күйгүзүү: Ensure your external power source is charged and connected correctly. Turn on your trail camera according to its specific instructions. The camera should draw power from the external source via the DC cable.
2. Monitoring Power: Regularly check the charge level of your external power source to ensure continuous operation of your trail camera.

Техникалык тейлөө

• Кабелдик текшерүү: Periodically inspect the DC cable for any signs of wear, fraying, or damage, especially at the connectors. Replace the cable if any damage is observed.
• Туташтыргычтын тазалыгы: Keep the DC plug and the camera's power port clean and free of dirt or debris to ensure a reliable connection.
• Кронштейндин туруктуулугу: Check the mounting bracket's stability regularly. Tighten any loose screws to prevent the camera from shifting or falling.
• Суу өткөрбөс бүтүндүгү: Ensure the waterproof protect case around the DC cable connection is properly seated to prevent moisture ingress.

Проблемаларды чечүү

• Камера күйбөй жатат:
  • Verify that the external power source is charged and functioning.
  • Check the DC cable connections at both the camera and the power source for secure fit and correct polarity.
  • Inspect the DC cable for any visible damage.
• Camera Shifting After Mounting:
  • Ensure the mounting bracket is tightly secured to the tree/post.
  • Confirm that the camera is firmly attached to the bracket.

Колдонуучу сунуштар

• For prolonged outdoor deployment, consider using a high-capacity external battery with the DC cable to minimize maintenance trips.
• When mounting, aim the camera to avoid direct sunlight on the lens, which can cause glare or overexposure.
• Test the camera's functionality and power connection thoroughly before leaving it unattended in the field.

Кепилдик жана колдоо

Boly products are designed for durability and performance. In case of any issues, please refer to the following:

• Кепилдик: All products from Boly Official Store typically come with a 1-year warranty from the date of sale. Please retain your proof of purchase.
• Кайтаруулар: Акысыз кайтаруу сатып алгандан кийин 90 күндүн ичинде жеткиликтүү.
• Жеткирүү Кепилдиги:
  • Эгерде жеткирүү кечиктирилсе, 1.00 долларлык купон коду берилиши мүмкүн.
  • Refunds are issued if the package is lost.
  • Refunds are issued if items are damaged upon arrival.
  • 30 күндүн ичинде жеткирүү жок болсо, толук кайтаруу.
• Колдоо кызматы менен байланышуу: For technical assistance or warranty claims, please contact the Boly Official Store directly through the platform where the purchase was made.