1. Киришүү
The ZGCINE NP-FW50 Dummy Battery with Type-C PD Power Cable is designed to provide a continuous and stable power supply to your compatible Sony camera. This adapter replaces the standard NP-FW50 battery, allowing you to power your camera directly from a Type-C Power Delivery (PD) source, such as a PD power bank, PD car charger, or PD wall charger. It is an ideal solution for extended video recording, live streaming, or studio photography where uninterrupted power is essential.
2. Пакеттин мазмуну
Сураныч, бардык буюмдар бар экенине ынануу үчүн пакетти кылдат текшериңиз:
- 1 x ZGCINE NP-FW50 Dummy Battery with integrated Type-C PD Power Cable
3. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | PD-FW50 |
| Киргизүү | PD 12V (Type-C) |
| Чыгуу | 8.4V / 3A |
| Кабелдин узундугу | Болжол менен 60 см (23.6 дюйм) |
| Dummy Battery Dimensions (L x W x H) | 4.5 см x 3.2 см x 1.8 см (1.8 дюйм x 1.3 дюйм x 0.7 дюйм) |
| Сертификаттар | CE, RoHS, FC |
| Продукт түрү | Camera Power Supply Adapter (Dummy Battery) |
4. Шайкеш камера моделдери
This NP-FW50 dummy battery is compatible with the following Sony camera models:
- Sony A7
- Sony A7M2 (A7 II)
- Sony A7R2 (A7R II)
- Sony A7S2 (A7S II)
- Sony A6000
- Sony A6300
- Sony A6500
- Sony A5000
- Sony A5100
- And other cameras using NP-FW50 batteries.
5. Орнотуу колдонмосу
Follow these steps to set up your ZGCINE NP-FW50 Dummy Battery:
- Ensure Camera is Off: Before inserting the dummy battery, make sure your camera is powered off.
- Батарея бөлүмүн ачуу: Locate and open the battery compartment door on your Sony camera.
- Insert Dummy Battery: Insert the NP-FW50 dummy battery into the camera's battery slot, ensuring it is oriented correctly, just like a standard battery.
- Маршруттук кабель: Most compatible Sony cameras have a small rubber flap or opening near the battery compartment door. Carefully route the Type-C power cable through this opening to allow the battery door to close completely.
- Батарея бөлүмүн жабуу: Close the battery compartment door securely. The camera will not power on if the door is not fully closed.
- Кубат Булагына туташуу: Connect the Type-C plug of the power cable to a compatible Power Delivery (PD) power source (e.g., PD power bank, PD wall adapter) that provides 12V output.
- Камераны күйгүзүү: Once connected, you can power on your camera.
6. Иштөө нускамалары
Once the dummy battery is correctly installed and connected to a power source, your camera will operate as if it has a fully charged battery. There are no additional operating steps for the dummy battery itself, as it simply provides continuous power.
- Ensure your PD power source is capable of delivering 12V output for optimal performance.
- Monitor your camera's power indicator to confirm it is receiving power.
- To disconnect, first power off your camera, then disconnect the Type-C cable from the power source, and finally remove the dummy battery from the camera.
7. Техникалык тейлөө
To ensure the longevity and proper functioning of your dummy battery:
- Keep the dummy battery and cable clean and dry. Avoid exposure to moisture or extreme temperatures.
- Do not bend or crimp the cable excessively, as this can damage the internal wiring.
- Store the dummy battery in a cool, dry place when not in use.
- Regularly check the Type-C connector and dummy battery contacts for any signs of damage or corrosion.
8. Кыйынчылыктарды
- Камера күйбөйт:
-
- Ensure the dummy battery is fully inserted into the camera's battery compartment.
- Verify that the camera's battery compartment door is securely closed.
- Check if the Type-C cable is firmly connected to both the dummy battery and the PD power source.
- Confirm that your PD power source is active and providing 12V output. Some PD sources may require negotiation to deliver 12V.
- Try a different compatible PD power source to rule out issues with the original source.
- Intermittent power supply:
-
- Check for loose connections at both ends of the Type-C cable.
- Кабельде көрүнгөн зыяндын бар-жоктугун текшериңиз.
- Ensure the PD power source is stable and not fluctuating in output.
9. Колдонуучунун кеңештери
Белгилүү бир колдонуучу жок болсо даviews or Q&A were available, here are some general tips for using dummy batteries:
- Choose a Reliable PD Source: Always use a high-quality Power Delivery (PD) power bank or adapter that can consistently provide 12V output to avoid power interruptions or potential damage to your camera.
- Кабелдик башкаруу: When routing the cable, ensure it does not interfere with any moving parts of the camera (e.g., screen articulation) or create a tripping hazard.
- Камдык күч: For critical shoots, consider having a fully charged standard battery as a backup, or multiple PD power banks, especially if shooting outdoors or in remote locations.
- Жылуулук башкаруу: While dummy batteries generally run cooler than actual batteries, ensure your camera has adequate ventilation during long sessions, especially when powered externally.
10. Кепилдик жана колдоо
For warranty information and technical support, please refer to the seller's policies or contact ZGCINE customer service directly. Keep your purchase receipt as proof of purchase.
