ANCEL DS300 OBD2 All System Bluetooth Car Scanner Instruction Manual

1. Introduction and Overview

The ANCEL DS300 is a new generation, high-end intelligent diagnostic equipment based on the Android 10 operating system. Designed by ANCEL, it offers comprehensive vehicle coverage, professional diagnostic features, and a robust hardware configuration. This device is ideal for professional mechanics, auto repair shops, and individual car owners who wish to perform in-depth diagnostics and maintenance on their vehicles.

Key features include full system diagnostics, bi-directional control, ECU coding, IMMO service, and 28 essential reset functions. It supports a wide range of vehicle makes and models, ensuring broad compatibility for various automotive needs.

2. Пакеттин мазмуну

Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы камтылганын текшериңиз:

• Main Tablet (ANCEL DS300)
• VCI Adaptor (Bluetooth Diagnostic Connector)
• C түрүндөгү кубаттоочу кабель
• Instruction Manual
• Сактоочу баштык

3. Продукциянын өзгөчөлүктөрү

3.1. Толук системаны диагностикалоо

The ANCEL DS300 provides OE-level full system diagnostics, allowing comprehensive scanning of all available systems in a vehicle. This includes, but is not limited to, the following:

• Мотор системасы
• Автоматтык берүү
• Airbags (SRS System)
• Immobilizer/Key Coding
• Бөгөт коюуга каршы тормоз системасы (ABS)
• Cruise Control
• Инструменттер
• Self-Leveling Suspension Systems
• Electronic Parking Brake (EPB System)
• Шина басымын көзөмөлдөө системасы (TPMS)
• Шасси системасы
• Кондиционер системасы
• Тормоздук жардам системасы
• Аспап системасы
• Doors, Gateway, Steering Angle, Air Suspension, Body Systems, Electronic Power Steering & Motor Assisted Power Steering, Rain Sensors, 4WD System, Stabilizer, Intelligent Parking Assist, Door Motors, Audio Systems, Tiptronic, Anti Theft, Soft Top, Headlamp Leveling, Central Locking, Automatic Clutch, DPF Reset, Electric Windows, Plip Programming, Heated Rear Window, Xenon Headlights, Wash Wipe, Fuel Burning Heater, Transfer Box, Seat Memory, Oil Life Service Reset, Sliding Doors, Electronic Throttle, Navigation System, Rollover Sensor, Multi Function Steering Wheel, Aux Heating, Electronic Parking Brake, Clutch Electronics.

3.2. Advanced Functions: ECU Coding & Bi-directional Control

The DS300 offers advanced functionalities to enhance vehicle maintenance and repair:

• ECU коддоо: This function allows you to re-flash vehicle control modules, match, learn, or code newly replaced ECUs. It can be used to activate hidden features, disable unwanted functions, and reprogram adaptive data for components after repairs or replacements. Examples include setting alarms, door locking, improving driving performance and fuel efficiency, and disabling automatic engine start/stop.
• Bi-directional Control (Actuation Test): The tool can actuate solenoids and actuators to perform active tests, sending commands to various systems/components to check their operational status without needing to use the vehicle's controls. This includes testing components like the fuel pump, radiator fan, modulating the throttle, operating windows and mirrors, turning on interior/exterior lights, sounding the horn, and testing door lock actuators.
• FCA Auto Auth: For 2018 and newer FCA vehicles (Chrysler, Dodge, Jeep, Fiat) in the US, Canada, and Mexico, the DS300 supports FCA Auto Auth for free.
• IMMO Service (Car-Key's Coding): This feature enables key matching, resetting keys, relearning keys, and adding new keys to prevent unauthorized vehicle use.

3.3. 28 Reset Service Functions

The ANCEL DS300 provides 28 essential maintenance reset functions, available for lifetime free use across all supported car models. These services help maintain vehicle performance and address common issues:

• Майды калыбына келтирүү: Resets the oil service light after an oil change.
• Эл. Дроссель адаптациясы: Initializes the throttle actuator to return the ECU's learning value to its initial state.
• Рулдук бурчту баштапкы абалга келтирүү: Resets the steering angle sensor to its relative zero point for accurate steering angle calculation.
• Батареяга дал келүү: Resets the vehicle battery monitoring unit, clearing old fault information and performing battery matching.
• ABS Bleeding: Bleeds air from the ABS system to restore brake sensitivity.
• Тормозду калыбына келтирүү: Resets the brake pad system after replacement to clear alarms.
• DPF калыбына келтирүү: Clears particulate matter from the Diesel Particulate Filter (DPF) to maintain filter performance.
• Gear Learning: Performs gear learning after engine ECU, crankshaft position sensor, or crankshaft flywheel replacement, or when a 'gear not learned' DTC is present.
• IMMO кызматы: Matches anti-theft keys to authorize remote control keys for vehicle use.
• Инжектор коддоо: Writes or rewrites injector codes in the ECU for precise cylinder injection quantity control.
• TPMS баштапкы абалга келтирүү: (Requires wireless tire pressure diagnosis tool) Activates, programs, and learns TPMS functions.
• Токтотуу дал келүү: Adjusts body height and performs level calibration for the air suspension system.
• AFS баштапкы абалга келтирүү: Initializes the adaptive headlamp системасы.
• A/T Learning: Completes gearbox self-learning to improve gear shifting quality.
• Люкту инициализациялоо: Sets sunroof lock-off, rain-closing, sliding/tilting memory, and temperature threshold functions.
• EGR адаптация: Learns the EGR valve after cleaning or replacement.
• Airbag баштапкы абалга келтирүү: Resets airbag data to clear collision fault indicators.
• Транспорт режими: Deactivates transport mode to restore full vehicle functionality (e.g., speed limits, remote control keys).
• A/F баштапкы абалга келтирүү: Sets or learns Air/Fuel ratio parameters.
• Stop/Start Reset: Enables or disables the automatic start-stop function via ECU hidden functions (if supported by vehicle hardware).
• NOx сенсорун баштапкы абалга келтирүү: Re-initializes NOx sensor faults and resets learned values in the engine ECU after catalytic converter replacement.
• AdBlue баштапкы абалга келтирүү (Дизель кыймылдаткычынын чыккан газ чыпкасы): Required after replacing or filling diesel exhaust treatment fluid (urea).
• Орундук калибрлөө: Matches seats with memory function after replacement or repair.
• Муздаткычтын кан агуусу: Activates the electronic water pump before venting the cooling system.
• Tire Reset: Sets size parameters for modified or replaced tires.
• Windows калибрлөө: Performs door window matching to recover ECU initial memory and automatic ascending/descending functions.
• Тилди өзгөртүү: Changes the system language of the vehicle central control panel.

3.4. Other Convenient Features

• Auto Read VIN Number: Automatically reads VIN information upon connecting to the car.
• Quickly Print Diagnostic Report: Generate and print diagnostic reports by transferring them to a computer via USB.
• Диагностикалык пикир: Submit recent test records to the ANCEL Team for analysis and troubleshooting of complex issues or software bugs.
• 4-in-1 Graphic Data Stream: Displays up to four data graphs simultaneously for easy comparison and analysis of parameters.
• One-click Upgrade via WIFI: Convenient software updates to ensure the device is always up-to-date.

4. Орнотуу жана иштетүү

4.1. Initial Device Setup and Registration

Follow these steps to set up and register your ANCEL DS300:

1. Setting Language & Time Zone, Connect WIFI: Navigate to the settings menu to select your preferred language and time zone. Connect the device to a stable Wi-Fi network.
2. Agree to the Registration Term: Review and accept the registration terms and conditions.
3. Каттоо эсебин: Create an account using your email address.
4. VCI Activate: Enter the serial number and password to activate your VCI (Vehicle Communication Interface) adaptor.

4.2. Device Interface and Navigation

The ANCEL DS300 features a 7-inch touch screen (1024*600 resolution) and offers a user-friendly 2-in-1 touch and button control interface. The VCI adaptor is a Diag mini 4 Bluetooth diagnostic connector.

5. Автоунааны камтуу

The ANCEL DS300 offers extensive vehicle coverage, supporting over 126 car makes and 200,000+ vehicle models. It is compatible with all OBD-II compliant vehicles manufactured after 1996. The device supports 20 languages for global usability.

Колдоого алынган тилдер:

English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak, Dutch, Korean, Swedish, Turkish, Czech, Indonesian, Chinese.

Supported Car Makes (Examples):

6. Техникалык шарттар

7. Кыйынчылыктарды

If you encounter any issues while using your ANCEL DS300, consider the following:

• Түзмөк күйбөй жатат: Ensure the device is fully charged or connected to a power source via the Type-C charging cable. Check the power switch (No. 11 in Figure 8).
• Connection Issues (VCI Adaptor): Verify that the VCI adaptor is securely plugged into the vehicle's OBD-II port (16 PIN). Ensure Bluetooth is enabled on the DS300 tablet and the VCI adaptor is properly paired.
• Diagnostic Software Errors: If you experience unexpected behavior or error messages during diagnostics, utilize the "Diagnostic Feedback" feature (see Section 3.4) to report the issue to ANCEL's technical support team.
• Унаа шайкештиги: Confirm that your vehicle's make, model, and year are within the supported range (see Section 5).
• Программалык камсыздоо жаңыртуулары: Ensure your device's software is up-to-date. Regular updates can resolve bugs and improve performance. Connect to Wi-Fi and use the "One-click Upgrade" feature.

8. Колдонуучунун кеңештери

Here are some tips to get the most out of your ANCEL DS300:

• Программалык камсыздоону үзгүлтүксүз жаңыртуу: Always keep your DS300 software updated via Wi-Fi to ensure access to the latest vehicle coverage, features, and bug fixes.
• Utilize Diagnostic Feedback: Don't hesitate to use the "Diagnostic Feedback" feature if you encounter any complex or unusual diagnostic scenarios. This helps the ANCEL team improve the product and provides you with expert assistance.
• Explore the "Consult" Section: The device includes a "Consult" section with five major sub-sections (OBD Fault Code Library, Coverage List, Service Video, Learning, User Manual). This is a valuable resource for understanding operations and specific functions.
• Leverage Bi-directional Control: For advanced users, the bi-directional control feature can save significant time in diagnosing component failures by directly testing actuators.
• Унаа каптоосун текшерүү: Before attempting advanced functions, always refer to the "Coverage List" function on the device to confirm compatibility with your specific vehicle model.
• Verify Product Authenticity: To ensure you have an original ANCEL device and receive full support, always purchase from authorized retailers or the official ANCEL store.

9. Кепилдик жана колдоо

ANCEL is committed to providing excellent customer service and product support:

• Кепилдик: The ANCEL DS300 comes with a 1-year warranty.
• Программалык камсыздоо жаңыртуулары: Enjoy 3 years of free software updates (excluding online programming services).
• Техникалык колдоо: Lifetime technical support is provided to assist with any product-related queries or issues.
• Кардарларды тейлөө: 24/7 customer service is available. You can access online customer service directly from the device. If the automated reply is not sufficient, you can switch to manual service.
• Алыстан колдоо: Remote assistance is available to help solve problems more conveniently and quickly.