1. Киришүү
Thank you for choosing the JONSBO ZA-Series Computer Case Fan. This manual provides essential information for the proper installation, operation, and maintenance of your new fan. The JONSBO ZA-Series fans are designed to offer efficient cooling and vibrant ARGB lighting for your computer system, featuring a monolithic structure and compatibility with various motherboard ARGB sync technologies.
Jonsbo is a highly-rated and popular brand known for its quality PC components, with consumers typically keeping their items due to satisfaction.
Figure 1: JONSBO ZA-Series Computer Case Fans
2. Продукциянын өзгөчөлүктөрү
- 28mm ARGB Infinity Mirror Series: Features a unique four-sided thousand-layer mirror light effect for stunning visuals.
- Integrated Fan Grille Lighting: The 360° four-sided mirror design ensures aesthetic appeal regardless of installation orientation.
- Жөнөкөйлөтүлгөн орнотуу: Designed for easy installation with a joint structure and fixed by 4 screws.
- Streamlined Wiring: A single line connection to the motherboard simplifies wiring and promotes neat cable management within the chassis.
- Aluminum CD Pattern Nameplate: The front features an elegant aluminum nameplate with a CD pattern, combining metal and light aesthetics.
- ARGB Colorful Synchronous Light Effect: Supports synchronization with custom lighting effects via a motherboard or controller with a 3-pin 5V optical control interface.
- PWM башкаруу: Allows for fine-tuning of fan speed to balance performance and noise levels.
- Forward and Reverse Fan Blades: Available in both forward and reverse blade designs to optimize airflow for various case configurations.
- Hydraulic Bearings: Ensures quiet operation and a long lifespan of over 20,000 hours at 25°C room temperature.
Figure 2: Key Features of JONSBO ZA-Series Fans
3. Техникалык шарттар
The JONSBO ZA-Series fans come in various configurations (ZA-120, ZA-240, ZA-360) and blade orientations (Forward 'B' and Reverse 'BR'). Below are the detailed specifications for each model.
Жалпы мүнөздөмөлөр
- Бренд аты: Jonsbo
- Подшипник: Fluid Bearing (Hydraulic Bearings)
- Саптар: 2 XNUMX XNUMX сап
- Күйөрман жашоосу: ≥20000h (at 25°C Room Temp)
- Бычактын саны: 7
- үчүн колдонулат: Корпус, Радиатор
- Келип чыгышы: Материк Кытай
- Пакет: Ооба
Detailed Model Specifications
| Параметр | ZA-120B (Forward) | ZA-120BR (Reverse) |
|---|---|---|
| Fan Size | 120(L)*120(W)*28mm(H) | 120(L)*120(W)*28mm(H) |
| Fan Speed | 700-2400 (±10%) RPM | 700-1800 (±10%) RPM |
| Аба көлөмү | 21.46-62.40 CFM | 19.46-44.58 CFM |
| Wind басымы | 0.49-2.46 mmH2O | 0.29-1.71 mmH2O |
| Ызы-чуу | 21.3-37.3 дБ(А) | 17.3-31.6 дБ(А) |
| Rated Voltage (FAN) | 12V | 12V |
| Rated Voltage (LED) | 5V | 5V |
| Rated Current (FAN) | 0.22A | 0.13A |
| Rated Current (LED) | 0.71A | 0.71A |
| Power Waste (FAN) | 2.64 Вт | 1.56 Вт |
| Power Waste (LED) | 3.55 Вт | 3.55 Вт |
| Интерфейс | PWM 4PIN, ARGB 3PIN | PWM 4PIN, ARGB 3PIN |
| Параметр | ZA-240B (Forward) | ZA-240BR (Reverse) |
|---|---|---|
| Fan Size | 242(L)*123(W)*28mm(H) | 242(L)*123(W)*28mm(H) |
| Fan Speed | 700-2400 (±10%) RPM | 700-1800 (±10%) RPM |
| Аба көлөмү | 21.46-62.40 CFM | 19.46-44.58 CFM |
| Wind басымы | 0.49-2.46 mmH2O | 0.29-1.71 mmH2O |
| Ызы-чуу | 21.3-37.3 дБ(А) | 17.3-31.6 дБ(А) |
| Rated Voltage (FAN) | 12V | 12V |
| Rated Voltage (LED) | 5V | 5V |
| Rated Current (FAN) | 0.43A | 0.25A |
| Rated Current (LED) | 1.16A | 1.16A |
| Power Waste (FAN) | 5.16 Вт | 3.00 Вт |
| Power Waste (LED) | 5.80 Вт | 5.80 Вт |
| Интерфейс | PWM 4PIN, ARGB 3PIN | PWM 4PIN, ARGB 3PIN |
| Параметр | ZA-360B (Forward) | ZA-360BR (Reverse) |
|---|---|---|
| Fan Size | 362(L)*123(W)*28mm(H) | 362(L)*123(W)*28mm(H) |
| Fan Speed | 700-2400 (±10%) RPM | 700-1800 (±10%) RPM |
| Аба көлөмү | 21.46-62.40 CFM | 19.46-44.58 CFM |
| Wind басымы | 0.49-2.46 mmH2O | 0.29-1.71 mmH2O |
| Ызы-чуу | 21.3-37.3 дБ(А) | 17.3-31.6 дБ(А) |
| Rated Voltage (FAN) | 12V | 12V |
| Rated Voltage (LED) | 5V | 5V |
| Rated Current (FAN) | 0.61A | 0.35A |
| Rated Current (LED) | 1.35A | 1.35A |
| Power Waste (FAN) | 7.32 Вт | 4.20 Вт |
| Power Waste (LED) | 6.75 Вт | 6.75 Вт |
| Интерфейс | PWM 4PIN, ARGB 3PIN | PWM 4PIN, ARGB 3PIN |
Figure 3: Specifications for ZA-120 and ZA-240 Models
Figure 4: Specifications for ZA-360 Models
Figure 5: Performance Metrics for Forward and Reverse Fan Blades
4. Пакеттин мазмуну
The JONSBO ZA-Series fan kit typically includes:
- JONSBO ZA-Series Fan(s) (model and quantity as purchased)
- Mounting Screws (4 per fan)
- Connection Cables (PWM 4-pin and ARGB 3-pin)
6-сүрөт: Мисample of ZA-360 Fan Kit with Cables
5. Орнотуу жана орнотуу
Follow these steps to properly install your JONSBO ZA-Series fan(s) into your computer case or onto a radiator.
- Компьютериңизди даярдаңыз: Power off your computer and disconnect it from the power source. Open your PC case.
- Монтаждоо ордун аныктоо: Determine where you want to install the fan(s) – typically on a case fan mount or a radiator. Ensure sufficient clearance.
- Mount the Fan(s):
- Align the fan(s) with the mounting holes. The ZA-Series fans are designed for easy installation with a joint structure.
- Secure each fan using the provided 4 screws.
- Consider using forward or reverse blade fans based on desired airflow direction (intake or exhaust). Refer to Figure 7 for airflow direction.
- Connect Power (PWM): Locate a 4-pin PWM fan header on your motherboard. Connect the fan's 4-pin PWM cable to this header. This allows for dynamic fan speed control.
- ARGB жарыктандырууну туташтыруу:
- Locate a 3-pin 5V ARGB header on your motherboard or a compatible ARGB controller.
- Connect the fan's 3-pin 5V ARGB cable to this header. The 5V ARGB plug features male and female designs, allowing for daisy-chaining with other ARGB devices.
- Ensure you connect to a 5V ARGB header, not a 12V RGB header, to prevent damage.
- Кабелдик башкаруу: Route the cables neatly to ensure optimal airflow and a clean build. The single-line connection design simplifies this process.
- Капты жаап, күйгүзүү: Once all connections are secure, close your PC case, reconnect power, and power on your computer.
Figure 7: Airflow Direction for Forward and Reverse Fans
Figure 8: Simplified Wiring for JONSBO ZA-Series Fans
Figure 9: ARGB Connection and Software Guide
6. Иштөө нускамалары
Once installed, your JONSBO ZA-Series fans will operate automatically. You can control their speed and lighting effects through your motherboard's software or a dedicated ARGB controller.
Желдетүүчү ылдамдыкты көзөмөлдөө (PWM)
The 4-pin PWM connection allows your motherboard to dynamically adjust fan speed based on CPU or system temperature. You can configure fan curves in your motherboard's BIOS/UEFI settings or through compatible software provided by your motherboard manufacturer (e.g., ASUS AI Suite, Gigabyte SIV, MSI Dragon Center).
ARGB жарыкты башкаруу
The 3-pin 5V ARGB connection enables control over the fan's vibrant lighting effects. To customize the lighting:
- Энелик платаны синхрондоштуруу: If connected to a compatible motherboard (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync), use the motherboard's ARGB software to synchronize and customize lighting effects across your system. The fans support over 16 million color effects.
- ARGB контроллери: If using a standalone ARGB controller, refer to the controller's manual for instructions on how to change lighting modes and colors.
- Ромашка чынжырлоо: The 5V ARGB plugs are designed for male and female connections, allowing you to connect multiple ARGB devices in series for synchronized lighting.
Figure 10: JONSBO ZA-Series Fans in Operation with ARGB Lighting
7. Техникалык тейлөө
Regular maintenance helps ensure optimal performance and longevity of your JONSBO ZA-Series fans.
- Чаңды тазалоо: Periodically (e.g., every 3-6 months), power off your PC and use compressed air or a soft brush to gently remove dust accumulation from the fan blades and frame. Dust can impede airflow and increase noise.
- Текшерүү: While cleaning, inspect the fan blades for any damage or obstructions. Ensure cables are securely connected and not interfering with fan rotation.
- Суюктуктардан алыс болуңуз: Do not use liquid cleaners directly on the fans or their electrical connections.
8. Кыйынчылыктарды
If you encounter issues with your JONSBO ZA-Series fans, refer to the following troubleshooting tips:
- желдеткич айланбай жатат:
- 4-пиндүү PWM кабели энелик платанын желдеткич колонкасына бекем туташтырылганын текшериңиз.
- Вентилятор аталышы энелик платаңыздын BIOS/UEFI жөндөөлөрүндө иштетилгенин текшериңиз.
- Желдеткичти башка желдеткич коллекторунда же мүмкүн болсо, желдеткич контроллери менен текшериңиз.
- ARGB жарыктандыруу жок:
- Verify that the 3-pin 5V ARGB cable is correctly connected to a 5V ARGB header (not 12V RGB).
- Ensure your motherboard's ARGB software or external controller is properly configured and running.
- Check for any loose connections in the ARGB daisy chain.
- Ашыкча ызы-чуу:
- Check for dust buildup on fan blades and clean if necessary.
- Ensure mounting screws are tightened properly to prevent vibrations.
- Verify that no cables are touching the fan blades.
- Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM if noise is a concern.
- Начар муздатуу:
- Ensure fans are oriented correctly for optimal airflow (intake vs. exhaust). Refer to Figure 7.
- Check for obstructions to airflow inside the case.
- Verify fan speed settings are appropriate for your system's thermal load.
9. Колдонуучунун кеңештери
Белгилүү бир колдонуучу жок болсо даviews or Q&A were provided, here are some general tips for optimizing your JONSBO ZA-Series fans:
- Airflow Strategy: Plan your case's airflow carefully. Use forward fans for intake (bringing cool air in) and reverse fans for exhaust (pushing hot air out) to create a positive or negative pressure system as desired.
- Daisy-Chaining ARGB: Алдын алаtage of the male and female ARGB connectors to daisy-chain multiple fans or other ARGB components, simplifying wiring and synchronization.
- Программалык камсыздоону ыңгайлаштыруу: Explore your motherboard's ARGB software to create unique lighting patterns and effects that match your build's aesthetic.
- Fan Curve Tuning: Experiment with different fan curves in your BIOS/UEFI to find the optimal balance between cooling performance and noise levels for your specific system.
10. Кепилдик жана колдоо
For warranty information, technical support, or any product-related inquiries, please contact the seller or Jonsbo customer service. Keep your proof of purchase for warranty claims.
