XTOOL XTS500 J2534 программалоо куралынын колдонуучу колдонмосу

1. Киришүү

The XTOOL XTS500 is a high-performance J2534 VCI (Vehicle Communication Interface) device designed for comprehensive automotive diagnostics and programming. Powered by an NXP Processor, it supports both 12V gasoline and 24V diesel systems, offering versatile connectivity options including wired and stable 2.4G WiFi. This tool is compatible with all mainstream vehicle communication protocols from 1996 onwards, including Dual-CAN, DoIP (for BMW/Mercedes), and CAN-FD (for GM models 2020+). The XTS500 provides OE-level diagnostic and programming capabilities, making it an essential tool for professional technicians.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before using the XTOOL XTS500. Failure to follow these instructions may result in electric shock, fire, or serious injury. This device is intended for use by trained professionals. Always refer to the vehicle manufacturer's service manual for specific diagnostic and programming procedures.

• Ensure the vehicle's ignition is off before connecting or disconnecting the device.
• Түзмөктү нымдуу шарттарда же тез күйүүчү суюктуктар же газдар бар жерде иштетпеңиз.
• Көздү коргоочу каражаттарды кошо алганда, тиешелүү жеке коргонуу каражаттарын кийиңиз.
• Аппаратты күчтүү магнит талаасынан алыс кармаңыз.
• Always use a stable power supply for the vehicle when performing ECU programming or coding to prevent data corruption.
• OEM software is required for many advanced functions and is not provided with this tool. Ensure you have legitimate and up-to-date OEM software.

3. Пакеттин мазмуну

The XTOOL J2534 VCI package includes the following items:

• XTOOL J2534 VCI Device
• USB зымсыз кабыл алгыч
• User Manual
• USB-C - USB-C кабели
• USB-C - USB-A адаптер
• OBD2 Extension Cable

4. Продукт бүтүп калдыview

4.1 Негизги өзгөчөлүктөрү

• J2534 Өткөөл программалоочусу: Performs OE-level vehicle diagnostics and programming.
• OEM-Level Full System Diagnostics: Comprehensive scans across all available vehicle systems.
• OE-Standard Reprogramming and Calibration: Allows writing of OEM software, ECU resetting, and performance calibration.
• Өркүндөтүлгөн ECU коддоо: Enables flashing hidden features, personalizing vehicle settings, and disabling unwanted functions.
• Dual-CAN, CAN-FD/DoIP Support: Compatible with modern vehicle communication protocols.
• Bi-directional Control & Active Tests: Precise validation of vehicle system performance through direct bidirectional communication.
• All Available Reset Services: Supports a wide range of special functions as per OEM software capabilities.
• Кош байланыш: Supports both wired (Type-C) and wireless (Wi-Fi) connections.
• Унаанын кеңири чөйрөсү: Supports 18+ major car brands (e.g., Toyota, Honda, GM, Ford, Nissan, Audi, Mercedes, BMW).

4.2 Аппараттык камсыздоо бүттүview

The XTS500 is built with premium hardware for reliable performance.

• Процессор: NXP процессору
• Экран: 0.97-inch Monochrome Display
• Operating Voltage диапазону: 9-36V
• Иштөө температурасы: 0 – 40°C (32°F – 104°F)
• Сактоо температурасы: -40…60°C (-40°F – 140°F)

5. Орнотуу

5.1 Системалык талаптар

The XTOOL XTS500 is compatible with Windows PC operations. It only supports Windows 7 and later versions. It is not compatible with macOS systems.

5.2 J2534 Driver Download and Installation

To use the XTS500, you must first download and install the J2534 driver on your Windows PC.

1. Visit the official XTOOL webсайт: www.xtooltech.com
2. дегенге өтүңүз Колдоо бөлүмүн, андан кийин тандаңыз Жүктөө борбору.
3. Locate and download the "J2534 Toolbox" software.
4. Орнотууну аяктоо үчүн экрандагы нускамаларды аткарыңыз.

5.3 Туташуу ыкмалары

The XTS500 offers both wired and wireless connectivity.

5.3.1 Wi-Fi Connection (General Diagnostic Functions)

Wi-Fi is suitable for general J2534 diagnostic functions and offers a range of over 32ft (10 meters).

1. Plug the OBDII-16 connector from the VCI box into the vehicle's DLC (Data Link Connector) port.
2. Connect the USB wireless receiver to an available USB port on your computer.
3. On your computer, go to Wi-Fi settings. Select the network named "WLAN 2".
4. Locate and connect to the Wi-Fi hotspot matching your device's serial number.
5. Once connected, your computer is linked to the device and ready for operation.

5.3.2 Wired Connection (Critical Operations)

A wired connection using the provided USB-C to USB-C cable is strongly recommended for critical scenarios to ensure stable and uninterrupted data transfer, preventing potential damage to vehicle modules.

• ЭБУ программалоо: Ensures stability during firmware flashing or module programming.
• ECU коддоо: Provides a reliable connection for writing configuration data and customizing settings.
• Diagnostics via DoIP (Diagnostics over Internet Protocol): Essential for high-volume data transmission without interference.

Note: For ECU programming, coding, and DoIP diagnostics, always use a wired connection to prevent data instability or interruption.

6. Иштөө нускамалары

Important: All advanced functions described below require OEM software support. XTOOL does not provide OEM software.

6.1 OEM-Level Full System Diagnostics

The XTS500 diagnostic tool performs comprehensive scans across all available systems in supported vehicles. This includes:

• Reading and clearing trouble codes (DTCs).
• Viewing live data streams and freeze frame data.
• Checking ECU information.
• Performing active tests and special functions.
• Executing ECU coding.

6.2 ECU Programming and Reprogramming

The XTS500 enables dealer-level ECU programming, including:

• Flashing ECU firmware via OEM server.
• Updating and reprogramming ECU modules.
• Upgrading to the latest software versions.
• Reinitializing systems with factory data.

6.3 Өркүндөтүлгөн ECU коддоо

The XTS500 delivers professional dealer-grade ECU Coding, allowing you to:

• Personalize vehicle settings.
• Match/code newly replaced ECUs.
• Perform component/module synchronization.
• Enable/disable comfort functions (e.g., adjusting chime sounds, automatic mirror folding, deactivating Start/Stop, disabling seat belt reminders).

6.4 Bi-directional Control & Active Tests

This function allows technicians to interactively command and evaluate electronic components and subsystems for accurate fault isolation and operational verification. Supported active tests include:

• Testing door locks.
• Activating/deactivating sound horn.
• Turning on/off lights.
• Operating mirrors.
• Opening/closing windows.
• Модуляциялоочу дроссель.
• Turning on radiator fan.

6.5 Reset Services

The XTS500 supports a wide array of special functions and reset services, which are dependent on the capabilities of the OEM software being used. Examples камтыйт:

• Майды калыбына келтирүү
• ABS Bleeding
• BMS баштапкы абалга келтирүү
• Инжектор коддоо
• EPB баштапкы абалга келтирүү
• A/C кайра үйрөнүү
• Дроссель адаптациясы
• DPF Regen
• Gearbox Adaptation
• ADAS калибрлөө
• HV Battery diagnostics
• Орундук калибрлөө
• Transport Mode activation
• Stop/Start Reset

6.6 Supported Protocols and Vehicle Coverage

The XTS500 supports J2534 Pass-Thru protocols, Dual-CAN, CAN-FD, and DoIP, along with other industry-standard protocols:

• ISO 14229, ISO 14230, ISO 15031, ISO 27145, ISO 9141, ISO 15765, ISO 11898, ISO 13400
• SAE J1708, SAE J1939, SAE J1587, SAE J1850

OEM software support is provided for 18 major automotive brands, with coverage typically from 1991-2005 to current models, depending on the brand (e.g., Toyota, Lexus, Scion, Acura, Honda, GM, Ford, Nissan, Infiniti, Audi, Skoda, VW, Subaru, Land Rover, Jaguar, Mercedes, Porsche, BMW).

7. Техникалык тейлөө

To ensure the longevity and optimal performance of your XTOOL XTS500, follow these maintenance guidelines:

• Тазалоо: Regularly clean the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Сактагыч: Аппаратты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
• Кабельге кам көрүү: Inspect cables for any signs of damage before each use. Replace damaged cables immediately.
• Программалык камсыздоо жаңыртуулары: Keep your J2534 Toolbox software updated to the latest version to ensure compatibility and access to new features.

8. Кыйынчылыктарды

If you encounter issues with your XTOOL XTS500, refer to the following common troubleshooting steps:

• Түзмөк туташпай жатат:
  • Ensure the OBDII-16 connector is securely plugged into the vehicle's DLC port.
  • Verify the USB wireless receiver is properly inserted into your PC, or the Type-C cable is securely connected for wired mode.
  • Check your PC's Wi-Fi settings to ensure connection to the correct "WLAN 2" hotspot for wireless operation.
  • Restart both the XTS500 device and your PC.
• Программа түзмөктү тааныбай жатат:
  • Confirm that the J2534 driver "J2534 Toolbox" is correctly installed on your Windows PC.
  • Ensure your Windows operating system is Windows 7 or higher.
  • Check for any firewall or antivirus software that might be blocking the connection.
• Data Transmission Errors During Programming/Coding:
  • Always use a wired (Type-C) connection for ECU programming, coding, and DoIP diagnostics to ensure maximum stability.
  • Ensure the vehicle battery is fully charged or connected to a stable power supply during these critical operations.
  • Avoid interrupting the process once it has started.
• Functionality Issues with Specific Vehicles/Models:
  • Verify that your OEM software supports the specific vehicle and function you are attempting.
  • Ensure your OEM software is up-to-date.
  • Vehicle/model compatibility depends entirely on the OEM software support.

9. Техникалык шарттар

10. Колдонуучунун кеңештери

• OEM Software is Key: Remember that the full functionality of the XTS500, including advanced diagnostics, programming, and coding, relies heavily on compatible OEM software. Ensure you have the necessary subscriptions and software installed.
• Туруктуулук үчүн зымдуу: For critical operations like ECU programming, coding, or DoIP diagnostics, always opt for the wired Type-C connection. This minimizes the risk of data corruption due to unstable wireless signals.
• Mileage Modification: The XTS500 is primarily designed for OE-level diagnostics, programming, coding, and reset services. While some OEM software might offer specific functions related to mileage, the device itself does not inherently provide a universal mileage modification feature. Such capabilities are dependent on the specific OEM software and vehicle model.
• Тилди колдоо: The device's interface and diagnostic output language are typically determined by the OEM software you are using. Check the settings within your OEM software for available language options.

11. Кепилдик жана колдоо

XTOOL жогорку сапаттагы өнүмдөрдү жана мыкты кардарларды тейлөөнү камсыз кылууга умтулат.

• Кепилдик: The XTOOL XTS500 comes with a 2-year warranty.
• Техникалык колдоо: Түзмөккө өмүр бою техникалык колдоо көрсөтүлөт.
• Онлайн кызматы: XTOOL offers 24-hour online service and professional technical support.
• Программалык камсыздоо жаңыртуулары: Enjoy lifetime free updates for the device's software.

For any technical assistance or inquiries, please contact XTOOL customer support through their official channels.