1. Киришүү
The Twotrees TS1 Mini Laser Engraver is a compact and versatile device designed for personal and DIY engraving projects. It features a 3W laser, supports multiple connection methods (USB, Bluetooth), and is compatible with various materials like wood, paper, leather, and plastic. This manual provides essential information for safe and effective use of your TS1 engraver.
Figure 1: Twotrees TS1 Mini Laser Engraver and example колдонмолору.
2. Коопсуздук маалыматы
WARNING: Class IV Laser Product. Avoid direct exposure to eyes. Always wear laser goggles during operation.
To ensure safe operation of your Twotrees TS1 Mini Laser Engraver, please observe the following safety guidelines:
- Always wear the provided laser goggles when the laser is active.
- Do not open the protective cover during engraving operations. Be careful of laser damage.
- Аппаратты балдардан жана үй жаныбарларынан алыс кармаңыз.
- Operate the engraver in a well-ventilated area to dissipate fumes and odors from engraving.
- Ensure the engraver is placed on a stable, non-flammable surface.
- Never leave the engraver unattended during operation.
- Do not engrave highly reflective, transparent, or unknown materials without proper precautions and testing.
Figure 2: Safety features including protective cover, goggles, and exhaust port.
3. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- TS1 Mini Laser Engraver unit
- Acrylic laser protective cover
- Лазердик көз айнек
- USB кабели
- Кубаттуу адаптер
- Screwdriver
- Test materials (e.g., wood, black plastic sheets)
- User Manual (physical copy)
3-сүрөт: Камтылган аксессуарлар жана компоненттер.
4. Орнотуу колдонмосу
- Пакеттен чыгаруу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
- Жайгашкан жери: Place the engraver on a stable, level, and non-flammable surface in a well-ventilated area.
- Кубат туташуу: Connect the power adapter to the engraver's power input, then plug it into a suitable electrical outlet.
- Computer/Mobile Connection:
- USB туташуу: Connect the engraver to your computer using the provided USB cable.
- Bluetooth байланыш: Enable Bluetooth on your mobile device and pair it with the TS1 engraver.
- Оффлайн операциясы: The device supports offline operation once engraving fileлар жүктөлөт.
- Программалык камсыздоону орнотуу: Install compatible software such as LightBurn or LaserGRBL for PC, or the MKSLaser mobile application.
- Фокусту тууралоо: The laser head is adjustable for optimal focusing distance (2.5-6.5 cm). Rotate the laser head to achieve the sharpest, smallest laser dot on your material. This ensures precise engraving.
Figure 4: Multiple connection options for the TS1 engraver.
Figure 5: Adjustable laser focus mechanism and precision details.
Video 1: TS1 Mini Laser Engraver Setup and Engraving Demonstration.
5. Иштөө нускамалары
- Материалды даярдоо: Place the material to be engraved within the engraving area (80x80mm). The machine cavity can support objects up to 30mm in height. Ensure the material is stable and flat.
- Wear Safety Goggles: Always wear the provided laser goggles before starting any engraving task.
- Программалык камсыздоо интерфейси:
- Open your chosen software (LightBurn, LaserGRBL, or MKSLaser app).
- Import your design. Supported formats include JPG, PNG, BMP, G-code, Gif, SVG, NC, GC.
- Гравюра параметрлерин тууралоо:
- Work Speed: Set the engraving speed (e.g., 800 mm/min).
- Лазердик күч: Adjust the laser intensity (e.g., 230, range 0-1000).
- Өлчөмү: Define the dimensions of your engraving.
- Style Setting: Utilize options like 'Gray', 'Strong', 'Sketch' to adjust brightness, contrast, and other image processing settings for optimal results.
- Preview жана кызмат орду: Use the software to preview the engraving path and adjust the material's position if necessary to ensure accurate placement.
- Гравюра баштоо: Once all parameters are set and the material is correctly positioned, initiate the engraving process from the software.
- Мониторинг: Continuously monitor the engraving process. Do not open the protective cover during operation.
- Аяктоо: After engraving is complete, safely remove the engraved item.
Figure 6: Mobile application interface for controlling the TS1 engraver.
6. Техникалык тейлөө
- Лазердик линзаны тазалоо: Regularly clean the laser lens with a soft, lint-free cloth. Ensure the device is powered off and unplugged before cleaning.
- Гравюралоо аймагын тазалоо: Keep the engraving area free from dust and debris. Use a soft brush or compressed air to remove any residue.
- Сормо порту: Ensure the exhaust port is clear to maintain proper ventilation and prevent smoke buildup.
- Сактагыч: When not in use, store the engraver in a dry, dust-free environment.
7. Кыйынчылыктарды
- Лазердик чыгаруу жок:
- Check if the power adapter is securely connected and the device is powered on.
- Verify that the USB or Bluetooth connection is active and stable.
- Ensure the laser power setting in your software is not set to zero.
- Confirm that the protective cover is properly closed, as some models have safety interlocks.
- Гравюранын сапаты начар:
- Фокус: Adjust the laser focus by rotating the laser head until the laser dot on the material is as small and sharp as possible.
- Орнотуулар: Experiment with different laser power and speed settings for your specific material. Refer to online resources or material guides for recommended parameters.
- Материал: Ensure the material is flat and securely placed to prevent movement during engraving.
- Туташуу маселелери:
- USB: Try a different USB port or cable. Reinstall the device drivers if necessary.
- Bluetooth: Ensure Bluetooth is enabled on both your device and the engraver. Try unpairing and re-pairing the devices.
- Программалык камсыздоо жооп бербей жатат:
- Restart the engraving software and the TS1 engraver.
- Check for any available software updates.
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Продукт аты | TS1 Mini Laser Engraving Machine |
| Main Body Color | Күмүш боз |
| Негизги дене материалы | Injection molding + aluminum |
| Продукциянын өлчөмдөрү (L x W x Y) | 157 мм x 157 мм x 167 мм (6.22 дюйм x 6.22 дюйм x 6.69 дюйм) |
| Гравюра аянты | 80mm x 80mm x 35mm (machine cavity supports objects 0-30mm high) |
| Лазердик күч | 3W |
| Оптималдуу фокустоо аралыгы | 2.5-6.5 cm (adjustable laser head) |
| Compatible Engraving Materials | Plywood, density board, solid wood board, paper, painted metal, kraft paper, leather, plastic, bamboo |
| Продукттун таза салмагы | Approx. 1025.7g (±100g) |
| Пакеттин өлчөмү | 203мм x 210мм x 196мм |
| Электр камсыздоо | 12V/2A |
| Жумушчу кубаттуулукту керектөө | 17.5 Вт |
| Bluetooth | Колдоого алынган |
| TF сактоо | Supported (built-in) |
| USB порту | Колдоого алынган |
| Гравюра тактыгы | 0.1мм |
| Максималдуу оюу ылдамдыгы | 3000мм/мин |
| Максималдуу ылдамдатуу | 320мм/мин |
| Шайкеш программалык камсыздоо | LightBurn, LaserGRBL, MKSLaser (mobile phone APP) |
| Controller | GRBL |
| Акылдуу түзмөк | Ооба |
| Сертификация | CE |
| CNC же жок | CNC |
Figure 7: Product dimensions and engraving area.
9. Колдонуучунун кеңештери
- Engraving LEGO Bricks: When engraving LEGO bricks, be aware that light-colored bricks may darken at the laser-engraved areas. For black bricks, the engraving effect may vary depending on the plastic's composition and laser settings. It is highly recommended to perform a test engraving on a spare or inconspicuous part of the LEGO brick using low power settings first to achieve desired results and avoid damage.
- Материалдык тестирлөө: Always perform small test engravings on new materials or when using new settings to determine the optimal laser power and speed.
- Вентиляция: Even with the built-in fan, ensure good room ventilation, especially when engraving materials that produce strong fumes.
10. Кепилдик жана колдоо
For warranty information, technical support, and service inquiries, please refer to the official TWO TREES website or contact your authorized retailer. Please retain your purchase receipt as proof of purchase for any warranty claims.
