Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Rittal Air Conditioning Thermostat, model PZRISNH001. This electronic thermostat, manufactured by Carel for Rittal applications, is designed for precise temperature control in air conditioning systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: Rittal Air Conditioning Thermostat PZRISNH001 and accessories.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | PZRISNH001 |
| Элемент номери | PZRISNH001453114 |
| Иштөө принциби | Электрондук термостат |
| Тtage | 230VAC |
| Power Rating | 2HP (Horsepower) / 250V10A |
| Сенсор түрү | 1 NTC (Negative Temperature Coefficient) |
| Термостаттын температура диапазону | Up to 110℃ (Note: This typically refers to the device's operating temperature limit, not the controlled air temperature range for AC applications.) |
| Origin | Материк Кытай |
| Монтаждоо | Панелди орнотуу |
2-сүрөт: Арткы view of the thermostat with model and electrical details.
Орнотуу жана орнотуу
Proper installation is crucial for the safe and effective operation of the thermostat. It should only be installed by qualified personnel in accordance with local electrical codes.
1. Панелди орнотуу
- Prepare an opening in the control panel with the dimensions specified in the mounting diagram.
- Insert the thermostat into the opening from the front.
- Secure the thermostat using the provided mounting clips or screws from the rear of the panel.
Figure 3: Panel mounting dimensions and method.
2. Электр зымдары
Refer to the wiring diagram (if provided with your unit) and the terminal layout on the back of the thermostat for correct connections. Ensure power is disconnected before performing any wiring.
- Электр камсыздоо: Connect the 230VAC power supply to the designated terminals.
- Туташууларды жүктөө: Connect the air conditioning unit's compressor or fan control wires to the appropriate output terminals (rated for 2HP / 250V10A).
- Сенсор туташуу: Connect the NTC temperature sensor to its dedicated input terminals. Ensure the sensor is placed in a location that accurately measures the air temperature to be controlled.
- Негиздөө: Ensure the unit is properly grounded according to electrical safety standards.
4-сүрөт: Арткы view зым терминалдары менен.
Warning: Incorrect wiring can cause damage to the thermostat or the connected equipment, and poses a risk of electric shock. Consult a professional electrician if you are unsure about any wiring steps.
Иштөө нускамалары
The Rittal PZRISNH001 thermostat features a digital display and intuitive buttons for setting and monitoring temperature.
Figure 5: Thermostat front panel controls.
1. Күйгүзүү/өчүрүү
- басыңыз Кубат баскычы (адатта тегерек жана тик сызык менен белгиленген) түзмөктү күйгүзүү же өчүрүү үчүн.
2. Температураны орнотуу
- басыңыз SET button. The display will show the current setpoint temperature, often blinking.
- колдонуу Өйдө (▲) жана Төмөн (▼) каалаган температураны тууралоо үчүн жебе баскычтары.
- Басыңыз SET again to confirm the new setpoint, or wait a few seconds for it to automatically save and return to displaying the current temperature.
3. Mute Alarm
- If an alarm sounds, press the БАСУУ button to silence it. The alarm indicator may remain active until the condition causing the alarm is resolved.
4. Индикаторлорду көрсөтүү
- The digital display shows the current measured temperature.
- Look for icons such as a snowflake (❄️) or fan to indicate cooling operation or fan status.
Техникалык тейлөө
Термостаттын үзгүлтүксүз техникалык тейлөөсү анын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Gently wipe the thermostat's display and casing жумшак, кургак чүпүрөк менен. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Сенсор текшерүү: Periodically inspect the temperature sensor and its wiring for any damage or loose connections. Ensure the sensor is free from dust or obstructions that could affect its accuracy.
- Туташуу текшерүү: Annually, or as needed, verify that all electrical connections are secure and free from corrosion. Ensure power is off before checking connections.
Проблемаларды чечүү
If you encounter issues with your thermostat, try the following steps before contacting support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Термостат күйбөй жатат | No power supply; loose wiring. | Check power source and ensure all power connections are secure. |
| Температураны туура эмес окуу | Faulty sensor; sensor placed incorrectly; sensor wiring issue. | Inspect sensor for damage, ensure proper placement, and check sensor wiring connections. |
| Air conditioning unit not responding | Incorrect setpoint; faulty thermostat output; wiring issue to AC unit. | Verify setpoint is below ambient temperature for cooling. Check load wiring. |
| Alarm sounding continuously | System fault; temperature out of range. | Identify the cause of the alarm (e.g., high temperature). Press MUTE to silence. If persistent, consult a technician. |
Колдонуучу сунуштар
- For optimal performance, ensure the temperature sensor is not exposed to direct sunlight, drafts, or heat sources that could skew readings.
- Regularly check the display for any error codes or unusual readings, which could indicate a potential issue.
- When setting the temperature, allow a few minutes for the system to respond and stabilize before making further adjustments.
Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please contact your Rittal or Carel product supplier or authorized service center. Keep your purchase receipt and product model number (PZRISNH001) handy when seeking support.
