Maxsun MS-eSport B650M WIFI ICE Motherboard Set User Manual

1. Киришүү

This manual provides detailed instructions for the installation, configuration, and maintenance of your Maxsun MS-eSport B650M WIFI ICE Motherboard Set. Designed for enthusiasts and gamers, this motherboard supports AMD Ryzen AM5 series processors and DDR5 memory, offering high performance and advanced connectivity. Please read this manual thoroughly before proceeding with installation to ensure proper setup and operation.

2. Пакеттин мазмуну

The contents of your package will vary based on the purchase option selected. Please verify your order against the list below:

• Motherboard+RAM option:
  • 1x Maxsun MS-eSport B650M WIFI ICE Motherboard
  • 2x 16GB 6000Mhz DDR5 RAM modules
• Motherboard+CPU option:
  • 1x Maxsun MS-eSport B650M WIFI ICE Motherboard
  • 1x AMD Ryzen 5 9600X CPU
• Motherboard+CPU+RAM option:
  • 1x Maxsun MS-eSport B650M WIFI ICE Motherboard
  • 1x AMD Ryzen 5 9600X CPU
  • 2x 16GB 6000Mhz DDR5 RAM modules
• All options include:
  • Колдонуучунун Колдонмосу (бул документ)
  • SATA кабелдери
  • WiFi антеннасы
  • I/O Shield (эгерде алдын ала орнотулбаса)
  • M.2 SSD screws/standoffs

Important Note: The CMOS battery on the motherboard will be removed before shipment due to shipping regulations. Please install a CR2032 battery during setup.

3. Продукт бүтүп калдыview

The Maxsun MS-eSport B650M WIFI ICE is a Mini-ITX motherboard designed for high-performance computing. It features a robust power delivery system, advanced cooling, and comprehensive connectivity options.

3.1 Негизги өзгөчөлүктөрү

• Enhanced Power Supply: 6+2+1 phase 50A Dr.Mos power design for stable performance, supporting up to R9 7900/R79700X processors.
• Сапаттуу материалдар: Utilizes polymer tantalum capacitors for long-life and higher power consumption handling.
• High-speed Memory: Two DDR5 DIMM slots supporting dual-channel memory up to 96GB, with overclocking support for speeds from 4800MHz to 8000+(OC)MHz.
• Өркүндөтүлгөн байланыш: Integrated Realtek REALTEK8111H Gigabit LAN, Realtek 8852BE WiFi 6 wireless card, and Bluetooth 5.2.
• PCIe 5.0 колдоосу: Features one PCIe 5.0 x16 slot for the latest graphics cards.
• Dual M.2 Slots: Two M.2 slots supporting 2242/2280 PCIe 4.0X4/X2 channel SSDs.
• MAXSUN Sync: Customizable ARGB lighting control with 2x 5V ARGB pins and 1x 12V NRGB pin.
• ESD коргоо: Active protection circuit design to strengthen electrostatic protection and extend component lifespan.
• LANGuard Network Security: Advanced signal coupling technology for enhanced network throughput and protection against surges and static electricity.

4. Техникалык шарттар

Detailed technical specifications for the Maxsun MS-eSport B650M WIFI ICE Motherboard.

5. Орнотуу нускамалары

Follow these steps to properly install your Maxsun MS-eSport B650M WIFI ICE Motherboard and components.

5.1 Коопсуздук чаралары

• Кандайдыр бир компоненттерди орнотуудан же алып салуудан мурун ар дайым электр кубатынан ажыратыңыз.
• Электростатикалык разряддын (ESD) бузулушун алдын алуу үчүн антистатикалык билек боонун тагыңыз.
• Handle components by their edges, avoiding direct contact with pins or circuitry.
• Ensure a well-ventilated workspace.

5.2 Motherboard орнотуу

1. Ишти даярдоо: Install the I/O shield (if not pre-installed) into your PC case. Ensure standoffs are correctly aligned for the Mini-ITX form factor.
2. Motherboard орнотуу: Carefully place the motherboard into the case, aligning the screw holes with the standoffs. Secure it with screws.

5.3 CPU Installation (AMD AM5 Socket)

1. Сокетти ачыңыз: Lift the retention arm on the AM5 socket.
2. CPU тегиздөө: Carefully align the AMD Ryzen AM5 CPU with the socket, ensuring the triangular markers on the CPU and socket match. Do not force the CPU into the socket.
3. CPU коопсуздугу: Gently lower the retention arm to secure the CPU in place.
4. CPU Cooler орнотуу: Apply thermal paste (if not pre-applied) and install your compatible AM5 CPU cooler according to its manufacturer's instructions.

5.4 RAM орнотуу (DDR5)

1. DIMM уячаларын ачуу: DDR5 DIMM уячаларынын эки учундагы клиптерди ачыңыз.
2. RAM салыңыз: Align the notch on the DDR5 memory module with the key in the DIMM slot. Press down firmly on both ends until the clips snap into place.
3. Кош каналдын конфигурациясы: For optimal performance, install memory modules in the recommended dual-channel configuration (refer to motherboard diagram for specific slots).

5.5 M.2 SSD орнотуу

1. Locate M.2 Slots: Энелик платадагы M.2 уячаларын аныктаңыз.
2. Standoff орнотуу: Screw in the M.2 standoff at the appropriate length for your SSD (2242 or 2280).
3. SSD салыңыз: M.2 SSDди уячага бурч менен салыңыз.
4. Коопсуз SSD: Gently push down the SSD and secure it with the M.2 screw.

5.6 Графикалык картаны орнотуу

1. Open PCIe Slot Clip: PCIe 5.0 x16 уячасындагы кармоочу клипти ачыңыз.
2. Графикалык картаны салыңыз: Align the graphics card with the slot and press down firmly until it clicks into place.
3. Коопсуз карта: Графикалык картаны бурама менен корпуска бекитиңиз.

5.7 Кубат туташтыруу

1. 24-пин ATX күчү: Connect the main 24-pin ATX power cable from your power supply to the motherboard.
2. 8-пин ATX 12V кубаттуулугу: Connect the 8-pin ATX 12V power cable (CPU power) to the motherboard.

5.8 Алдыңкы панель жана перифериялык байланыштар

• Front Panel Connectors (F_PANEL): Connect the power switch, reset switch, HDD LED, and power LED cables from your case to the F_PANEL header.
• USB аталыштары: Connect front panel USB 2.0 and USB 3.2 Gen1 cables to their respective headers.
• Аудио аталышы: Connect the front panel audio cable to the F_AUDIO header.
• Күйөрмандардын аталыштары: Connect CPU fan to the CPU_FAN header and case fans to the SYS_FAN headers.
• ARGB/NRGB Headers: Connect compatible RGB devices to the 5V ARGB or 12V NRGB headers.
• WiFi антеннасы: Screw the included WiFi antenna(s) onto the rear I/O ports.

5.9 CMOS Battery Installation

As the CMOS battery is removed for shipping, carefully insert a CR2032 coin cell battery into the battery holder on the motherboard, ensuring correct polarity (+ side up).

6. Иштөө нускамалары

6.1 Биринчи жүктөө

1. Бардык компоненттер орнотулуп, туташтырылгандан кийин, мониторуңузду, клавиатураңызды жана чычканды туташтырыңыз.
2. Электр кабелин кубат булагыңызга туташтырыңыз жана кубат которгучту күйгүзүңүз.
3. Компьютериңиздин корпусундагы кубат баскычын басыңыз.
4. The system should boot to the BIOS/UEFI interface or begin the operating system installation process.

6.2 BIOS/UEFI орнотуу

• During boot-up, press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup.
• Configure boot order, enable XMP/EXPO for RAM, and adjust other system settings as needed.
• Save changes and exit BIOS/UEFI.

6.3 Драйверди орнотуу

After installing your operating system (Windows 10/11 64bit or Ubuntu 64bit), install the necessary drivers for the motherboard components. These typically include:

• Чипсеттин драйверлери
• Graphics drivers (for integrated or discrete GPU)
• Аудио драйверлери
• LAN drivers
• WiFi/Bluetooth drivers

Drivers can usually be found on the Maxsun official website or the respective component manufacturers' websites (AMD, Realtek).

6.4 MAXSUN Sync Software

Install the MAXSUN Sync lighting control software to customize the ARGB lighting effects on your motherboard and connected compatible devices. Refer to the software's interface for detailed customization options.

7. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин энелик платаңыздын узак иштөөсүн жана оптималдуу иштешин камсыз кылууга жардам берет.

• Чаңды тазалоо: Periodically clean dust from the motherboard, CPU cooler, and case fans using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Драйвер жаңыртуулары: Keep your motherboard drivers and BIOS/UEFI firmware updated to ensure compatibility and performance improvements. Check the Maxsun webакыркы версиялар үчүн сайт.
• Кабелдик башкаруу: Аба агымын жакшыртуу жана тоскоолдуктарды болтурбоо үчүн кабелдердин тыкан өткөрүлүшүн текшериңиз.
• Температура мониторинги: Use monitoring software to keep an eye on CPU and system temperatures to prevent overheating.

8. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.

8.1 Кубат жок / Жүктөө жок

• Электр байланыштарын текшерүү: Ensure the 24-pin ATX and 8-pin ATX 12V power cables are securely connected to the motherboard and power supply.
• Электр камсыздоо: Кубат булагы күйүп турганын жана туура иштеп жатканын текшериңиз.
• Алдыңкы панелдин байланыштары: Double-check the F_PANEL connections, especially the power switch header.
• CMOS батареясы: Ensure a CR2032 battery is correctly installed.
• CMOS тазалоо: Use the rear CLR_CMOS button or short the CLR_CMOS pins (refer to motherboard diagram) to reset BIOS settings.

8.2 Дисплей жок

• Монитор туташуу: Ensure the monitor cable is securely connected to the graphics card or motherboard (if using integrated graphics).
• Графикалык карта: Reseat the graphics card in its PCIe slot. Ensure any required PCIe power cables are connected.
• RAM: RAM модулдарын кайра орнотуңуз. Бир гана RAM модулу орнотулуп, жүктөөгө аракет кылыңыз.
• CPU: CPU өзүнүн розеткасына туура орнотулганын текшериңиз.

8.3 Тармакка туташуу маселелери

• Зымдуу LAN: Check the Ethernet cable connection. Ensure LAN drivers are installed.
• WiFi: Ensure the WiFi antenna(s) are securely attached. Install WiFi drivers. Check router settings.
• Bluetooth: Ensure Bluetooth drivers are installed. Check device pairing.

8.4 Overclocking Instability

• If you experience instability after overclocking CPU or RAM, reset BIOS settings to default using the CLR_CMOS button.
• Көбөйтүү томtage incrementally and test stability thoroughly when overclocking.

9. Колдонуучунун кеңештери

• CPU Condition: Be aware that the CPU, if included in your bundle, may be either disassembled (used but tested well) or brand new. Both are tested for functionality before shipment.
• Memory Condition: RAM modules included in bundles are brand new and tested for good performance.
• RAID колдоо: This motherboard supports RAID configurations (0, 1, 5, 10) for SATA drives. Consult your operating system's documentation for setting up RAID.
• Processor Compatibility: The motherboard is compatible with AMD Ryzen 7000 Series (R3, R5, R7, R9) processors. Ensure your chosen CPU is from this series.
• UEFI Diskless Boot: The motherboard supports UEFI diskless boot and PXE diskless boot, useful for network-based system deployments.

10. Кепилдик жана колдоо

The Maxsun MS-eSport B650M WIFI ICE Motherboard comes with a 3-year limited warranty. For technical support, driver downloads, or warranty claims, please contact your retailer or visit the official Maxsun webсайт. Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактаңыз.