CAME TOPD4REN 806TS-0290 Гараж эшигинин пультунун колдонуучу колдонмосу

1. Продукт бүтүп калдыview

The CAME TOPD4REN 806TS-0290 is a dual-frequency rolling code garage door remote control designed for operating electric doors and garage door openers. It transmits on both 433.92MHz and 868.35MHz frequencies, utilizing a rolling code system for enhanced security and to prevent interference with other radio equipment. This remote is capable of copying fixed code, learning code, and rolling code signals from compatible original remotes.

Маанилүү шайкештик эскертүүсү:

This remote control is specifically designed to be compatible with CAME systems and other remotes that use the specified dual frequencies and rolling code technology. It is not universally compatible with all brands of remote controls. Please ensure your original remote or system matches the specifications before attempting to use this device.

2. Техникалык шарттар

3. Орнотуу жана жупташтыруу

This remote control is a duplicator, meaning it needs to learn the code from an existing, working remote or be programmed directly to your receiver. The exact pairing process can vary depending on your garage door opener or electric gate system. Below is a general guide for common duplication methods.

3.1. Clearing Existing Code (Factory Reset)

Before programming, it is recommended to clear any pre-existing codes on the new remote.

1. Press and hold the two top buttons (A and B, or Lock and Unlock icons) simultaneously until the LED flashes rapidly (usually 3 times, then pauses, then flashes continuously).
2. Release one of the buttons while continuing to hold the other.
3. Press the released button three times. The LED should flash continuously.
4. Release all buttons. The remote is now cleared and ready for programming.

If the LED does not flash as described, repeat the process. A successful clear means pressing any button will not cause the LED to light up.

3.2. Duplicating from an Original Remote

This method requires a working original remote control.

1. Place the original remote and the new CAME TOPD4REN remote side-by-side or head-to-head (some remotes work better in specific orientations).
2. Көчүргүңүз келген түпнуска пульттагы баскычты басып, кармап туруңуз.
3. Simultaneously, press and hold the desired button on the new CAME TOPD4REN remote where you want to store the code.
4. Keep both buttons pressed until the LED on the new remote flashes rapidly (usually 3 times, then pauses, then flashes continuously). This indicates successful code learning.
5. Эки баскычты бошотуңуз.
6. Repeat this process for each button you wish to program.

After duplication, it is crucial to test the new remote with your receiver. Some rolling code systems may require an additional step of "learning" the new remote to the receiver unit itself. Refer to your garage door opener or gate system's manual for specific instructions on adding new remotes.

3.3. Programming Directly to Receiver (Learning Mode)

For some rolling code systems, the remote must be programmed directly to the receiver unit, rather than duplicating from another remote. This typically involves:

1. Locating the "Learn" or "Program" button on your garage door opener or gate receiver unit.
2. Басуу жана кайраasing the "Learn" button (the LED on the receiver may light up).
3. Within a short timeframe (e.g., 30 seconds), press the desired button on your new CAME TOPD4REN remote.
4. The receiver's LED may flash or change color to confirm successful pairing.

Always consult the specific manual for your garage door opener or gate system for precise instructions on entering learning mode and pairing new remotes.

4. Пультту иштетүү

Once successfully programmed, operating the CAME TOPD4REN remote control is straightforward:

• Press the programmed button corresponding to your garage door or gate function.
• The LED on the remote will illuminate briefly to indicate a signal is being transmitted.
• Ensure you are within the transmitting distance (50-100 meters, line of sight) for optimal performance. Environmental factors and obstructions can affect range.

5. Техникалык тейлөө

5.1. Батареяны алмаштыруу

The remote control uses a 3V battery. If the remote's range decreases significantly or the LED indicator does not light up when a button is pressed, the battery may need replacement.

1. Алыстан башкаруу пультун c этияттык менен ачыңызasing. Refer to the back of the remote for any specific opening points or screws (see Figure 5).
2. Note the type and orientation of the existing 3V battery.
3. Remove the old battery and insert a new 3V battery, ensuring correct polarity.
4. Алыстан башкаруу пультун c жабыңызasing коопсуз.
5. Test the remote control after battery replacement.

5.2. Тазалоо жана сактоо

• Clean the remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Store the remote in a dry place, away from direct sunlight, extreme temperatures, and moisture.
• Пультту түшүрүп албоодон же катуу соккуга кабылбоодон алыс болуңуз.

6. Кыйынчылыктарды

7. Кепилдик жана колдоо

• Продукт Кепилдиги: All products come with a 1-year warranty from the date of purchase.
• Кайтаруулар: Enjoy 7 days return if there are any quality problems with the product. Additionally, free returns are available within 90 days.
• Жеткирүү Кепилдиги: If delivery is delayed, a $1.00 coupon code may be provided. Refunds are available if the package is lost or items are damaged during shipping, or if no delivery occurs within 60 days.
• Кардарларды колдоо: For any inquiries or support needs, please contact customer service. Emails will be answered within 24 hours.