1. Киришүү
This manual provides instructions for the installation and operation of the 70mai Dash Cam Hardwire Kit OBD-II and the 70mai Adjustable Hardwire Kit UP06. These kits are designed to provide continuous power to your 70mai Type-C dash cam, enabling parking surveillance features and offering comprehensive battery protection for your vehicle.
2. Продукт бүтүп калдыview & Main Features
Both hardwire kits ensure your dash cam stays powered for parking surveillance, utilizing either your vehicle's OBD port or a direct fuse box connection. They are compatible with 70mai Type-C dash cams and provide a stable 5V/2.4A output.
Негизги өзгөчөлүктөрү:
- Streamlined Installation: Plug and play for the OBD-II kit, or simplified hardwiring for the UP06.
- Customized Voltage Босого: Adjustable settings to prevent low vehicle battery voltage.
- Tailored Surveillance Duration: Configure the duration of parking surveillance.
- Multiple Battery Health Protections: Includes short-circuit, overload, overcurrent, and reverse connection protection to safeguard your vehicle's battery.
Battery Protection Details:
- Low Voltage Коргоо: Automatically cuts power when the voltage өтө төмөн төмөндөйт.
- Ашыкча ток коргоо: Prevents damage from excessive currents.
- Кыска туташуулардан коргоо: Cuts power during short circuits.
- Ашыкча жүктөн коргоо: Stops power when the current is too high.
- Тескери туташуу коргоо: Disables power for incorrect wiring.
3. Орнотуу жана орнотуу
3.1. 70mai OBD-II Hardwire Kit Installation
The OBD-II hardwire kit offers a plug-and-play solution for parking surveillance, requiring no complex fuse box modifications.
Орнотуу кадамдары:
- Locate OBD Port: Find your car's OBD port (usually under the dashboard on the driver's side).
- Плагин: Connect the OBD-II connector into the car's OBD port.
- Dash Camга туташуу: Insert the Type-C end of the hardwire kit into your 70mai dash cam's power port.
- Enable Parking Surveillance: Activate the parking surveillance mode in your dash cam settings.
Important Notes for OBD-II Kit:
- Some vehicle models may not support OBD power. Consult your vehicle manufacturer if unsure.
- This OBD-II kit is exclusively compatible with 70mai dash cams featuring a Type-C interface. It cannot be used with Micro USB dash cams.
- The OBD-II kit defaults to a 12.7V threshold for entering parking mode. If your vehicle's voltage is too high and prevents parking mode activation after shutdown, adjust DIP switch 5 to 'High'.
3.2. 70mai Adjustable Hardwire Kit UP06 Installation
The UP06 kit requires connection to your vehicle's fuse box for continuous power.
General Hardwiring Steps (UP06):
- Turn off Engine: Ensure your vehicle's engine is off and the ignition is completely disengaged.
- Сактандыргыч кутучасын табыңыз: Identify your vehicle's fuse box (refer to your car's manual for location).
- Сактагыч уячаларын аныктоо: Locate appropriate fuse slots for ACC (Accessory, power only when ignition is on), VCC+ (Constant Power, always on), and GND (Ground).
- Зымдарды туташтыруу: Use the provided fuse taps to connect the ACC (yellow), VCC+ (red), and GND (black) wires from the hardwire kit to the corresponding fuse slots and a metal ground point in your vehicle.
- Маршруттук кабель: Carefully route the Type-C cable to your dash cam, ensuring it does not interfere with driving controls or airbags.
- Dash Camга туташуу: Plug the Type-C connector into your 70mai dash cam.
- Сыноо байланышы: Start your vehicle to ensure the dash cam powers on correctly and parking surveillance functions as expected.
4. Операция
4.1. Parking Surveillance
Both hardwire kits enable your 70mai dash cam to utilize its parking surveillance features, recording events even when your vehicle is parked and the engine is off. The dash cam will enter parking mode based on the configured voltage threshold and surveillance duration settings.
4.2. Томtage and Surveillance Duration Adjustment (OBD-II Kit)
The OBD-II hardwire kit features DIP switches for customizing low voltage protection and surveillance duration settings.
Refer to the table below for DIP switch configurations:
| Орнотуу түрү | Low Voltage Protection Settings (±0.2V) | Surveillance Duration Settings | ACC Settings | |||||
|---|---|---|---|---|---|---|---|---|
| Тtage/Duration | 1 | 2 | 3 | 4 | Узактыгын жөндөө | 5 | Жогорку | Төмөн |
| 11.6V / 23.6V | ↑ ON | ↑ ON | ↑ ON | ↑ ON | 8H | ↑ ON | ON | ӨЧҮРҮҮ |
| 11.9V / 23.9V | ↑ ON | ↓ OFF | ↑ ON | ↓ OFF | 12H | ↑ ON | ON | ӨЧҮРҮҮ |
| 12.2V / 24.2V | ↓ OFF | ↑ ON | ↑ ON | ↑ ON | 24H | ↑ ON | ON | ӨЧҮРҮҮ |
| 12.5V / 24.5V | ↓ OFF | ↓ OFF | ↓ OFF | ↓ OFF | Ар дайым | ↑ ON | ON | ӨЧҮРҮҮ |
| DIP которулуу | ↑ ON | ↓ OFF | ON | ӨЧҮК | ||||||
4.3. Real-time Voltage Display (UP06 Kit)
The UP06 hardwire kit features a real-time voltage display on its power module, allowing you to monitor your vehicle's battery voltagд түз.
5. Техникалык шарттар
5.1. 70mai OBD-II Hardwire Kit Specifications
| Өзгөчөлүк | Деталь |
|---|---|
| Киргизүү көлөмүtage | 12-30V (Adaptable for 12V/24V Batteries) |
| Чыгуу | 5V 2.4A |
| Интерфейс | Type-C |
| DIP өчүргүчтөр | Тtage Adjustment: 4 Levels, Surveillance Duration: 6 Levels |
| Low Voltage коргоо кечиктирүүсү | 6 мүнөт |
| Output Cut-Off ACC Voltage (Switch 5) | ON: 13.3V / 25.9V ±0.2V, OFF: 12.6V / 25.5V ±0.2V |
| Output Cut-Off ACC Delay | 3 мүнөт 40 секунд |
| LED көрсөткүч | Green: normal operation, Red: protection activated |
| Иштөө температурасы | -20°Cден +70°Cге чейин (4°F менен 158°F) |
| Кирүү кабели | 0.5m red & black two-core cable |
| Output Cable | 3.5m three-core cable with Type-C straight connector |
| Шайкештик | 70mai Type-C Dash Cams |
5.2. 70mai Adjustable Hardwire Kit UP06 Specifications
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | Midrive UP06 |
| Киргизүү көлөмүtage | 12-30V |
| Output Voltage | Type-C 5V/2.4A |
| Low Voltage Коргоо | Three-level adjustable (±0.2V accuracy) |
| Иштөө температурасы | -20°Cден 70°Cге чейин (-4°Fтен 158°Fге чейин) |
| Кирүү кабели | 1.0m (3.28ft), 22AWG (ACC, GND, VCC+ with bullet terminals) |
| Output Cable | 3.0m (9.84ft) (Black and Red: 22AWG, Yellow: 26AWG) Type-C connector |
| Шайкештик | All 70mai Type-C Port Dash Cams |
6. Кыйынчылыктарды
Жалпы маселелер жана чечимдер:
- Dash Cam күйбөй жатат:
- Бардык байланыштар коопсуз экенин текшериңиз.
- Verify the hardwire kit is correctly installed according to the specific model's instructions.
- Check vehicle's fuse (for UP06) or OBD port functionality (for OBD-II).
- Confirm compatibility with your 70mai dash cam (Type-C interface required).
- Унаа токтотуу режими иштетилбей жатат:
- For OBD-II kit, check DIP switch settings for voltage threshold and surveillance duration. If vehicle voltage is high, adjust DIP switch 5 to 'High'.
- Ensure your dash cam's parking surveillance feature is enabled in its settings.
- Унаанын аккумуляторунун кубаттуулугун текшерүүtage is above the set low voltage коргоо босогосу.
- LED Indicator (OBD-II Kit) is Red:
- A red LED indicates protection activated (e.g., low voltage, overcurrent). Check vehicle battery health or power draw.
7. Колдонуучунун кеңештери
- Always ensure your 70mai dash cam has a Type-C interface for compatibility with these hardwire kits.
- For the OBD-II kit, if you experience issues with parking mode activation, try adjusting the 5th DIP switch to 'High' as per the instructions.
- When installing the UP06 kit, double-check your vehicle's fuse box diagram to correctly identify ACC, VCC+, and GND connections to avoid electrical issues.
- Regularly check your vehicle's battery health, especially if using parking surveillance for extended periods, to prevent excessive discharge.
8. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official 70mai webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
9. Video Tutorial
For a comprehensive visual guide on installation and setup, please watch the full tutorial video below:
