POSEIDON V5 Tattoo Pen Kit User Manual

1. Коопсуздук маалыматы

Please read all safety instructions carefully before using the POSEIDON V5 Tattoo Pen Kit. Improper use can lead to injury or damage to the device.

• This device is intended for professional tattoo and permanent makeup use.
• Keep the device and all accessories out of reach of children.
• Ensure the device is clean and sterilized before each use.
• Аппаратты сууга же ашыкча нымдуулукка дуушар кылбаңыз.
• Түпнуска же бекитилген гана алмаштыруучу тетиктерди жана аксессуарларды колдонуңуз.
• If the device malfunctions or shows signs of damage, discontinue use immediately.

2. Кутуда эмне бар

The POSEIDON V5 Tattoo Pen Kit typically includes the following components:

• Tattoo Pen (x1)
• Wireless Power Supply (x1)
• Poseidon Tattoo Cartridge Needles (x20)
• Black Bandage (5cm x1)
• Tattoo Clean Pads (x4)
• Gloves (x2 Pair)
• Tattoo Transfer Paper (x4)
• Tattoo Practice Leather (x1)
• Tattoo Repair Patch (x1)
• Tattoo Ink Cups (medium size x20 / small-sized x20)
• Colors Tattoo Ink (x10)
• POSEIDON Black Tattoo Ink (x1)
• Blue Algae (x1)

3. Орнотуу жана чогултуу

Follow these steps to set up your POSEIDON V5 Tattoo Pen Kit:

1. Charge the Wireless Power Supply: Connect the wireless power supply to a compatible TYPE-C charging cable. The display will show a charging symbol. Ensure it is fully charged before use for optimal performance.
2. Attach Wireless Power Supply: Screw the wireless power supply onto the top of the tattoo pen. Ensure it is securely fastened. The pen can be used in both wired and wireless modes.
3. Insert Needle Cartridge: Gently push a sterile tattoo cartridge needle into the front opening of the tattoo pen until it clicks into place.
4. Adjust Needle Extension: Rotate the grip of the tattoo pen to adjust the needle extension length according to your preference and tattooing requirements.

4. Иштөө нускамалары

The device is operated via buttons on the wireless power supply (power on/off button, +/- function buttons). Refer to the video demonstration for visual guidance.

Video: Demonstration of the tattoo pen kit setup and operation, including needle adjustment, power control, and voltage орнотуулар.

Негизги операция:

• Күйгүзүү/өчүрүү: Press and hold the power button for 1.5 seconds to turn the machine on or off.
• Start/Pause Motor: Once powered on, press the power button to activate the motor and begin tattooing. Press again to pause.
• Тtage Тууралоо: Use the "+" and "-" buttons to adjust the voltage in increments of 0.1V. Hold the buttons for continuous adjustment. The voltage range is 4.0V to 12.0V, with a standard setting of 8V.
• Strong Start Mode: After turning on, double-press the function buttons to activate Strong Start Mode. The maximum speed will be maintained for 0.5 seconds, then revert to the set speed.

Өркүндөтүлгөн өзгөчөлүктөр:

• Автоматтык уйку режими: The display will automatically turn off after 10 seconds of inactivity. The device will enter sleep mode after 5 minutes of inactivity.
• Батареянын аздыгы жөнүндө эстеткич: When the battery level reaches 79%, the battery symbol on the display will flash as a reminder to recharge.
• Заряддоо операциясы: The TYPE-C charging port allows operation while charging. During charging, the display will show a charging symbol and the actual battery level will flash.
• Automatic Threading/Unthreading: If no threading action is performed within 5 minutes, the device will automatically thread and unthread.
• Функция баскычтары: Function keys allow switching between options. Use the +/- buttons to set stitch length or frequency. Settings can be changed by rotating the function key. Press the power button to exit settings, or hold for 5 seconds for automatic configuration.
• Staple Mode: Press the 'M' function key to switch between staple mode and normal mode. In staple mode, use the +/- buttons to set the frequency (e.g., 20NPS10HZ).

5. Техникалык тейлөө жана кам көрүү

Proper maintenance ensures the longevity and hygiene of your tattoo pen kit.

• Тазалоо: After each use, thoroughly clean the tattoo pen and all reusable components. Use appropriate sterilization solutions for tattoo equipment.
• Сактагыч: Store the kit in a clean, dry place, away from direct sunlight and extreme temperatures.
• Needle Disposal: Always dispose of used needle cartridges in a designated sharps container.
• Батареяга кам көрүү: Батареянын тез-тез толук зарядын жоготуп алуудан алыс болуңуз. Батареянын иштөө мөөнөтүн сактоо үчүн аны үзгүлтүксүз заряддап туруңуз.

6. Кыйынчылыктарды

If you encounter issues with your POSEIDON V5 Tattoo Pen Kit, refer to the following common problems and solutions:

• Ката коду E1: This indicates a motor lock or overload protection. Check for any obstructions preventing the motor from running freely. If the issue persists after restarting, contact support.
• Ката коду E2: This indicates overcurrent protection. This may occur if the device is drawing too much power. Ensure you are using the correct voltage settings and that the needle is not jammed.
• Түзмөк күйбөй жатат: Ensure the wireless power supply is fully charged and securely attached. Press and hold the power button for the required 1.5 seconds.
• Ийне кыймылдабай жатат: Check if the needle cartridge is correctly inserted and if the motor is running. Verify voltage орнотуулар.

7. Техникалык шарттар

8. Колдонуучунун кеңештери

Based on user feedback, here are some tips for an optimal experience:

• The pen is noted for its comfortable grip and precise operation, making it suitable for various tattoo applications.
• Its quiet and stable motor contributes to a smooth tattooing process.
• The anti-slip design ensures a good hand feeling, reducing fatigue during long sessions.
• The aluminum alloy protective layer at the needle interface enhances durability and wear resistance.

9. Кепилдик жана колдоо

For warranty information, technical support, or any inquiries regarding your POSEIDON V5 Tattoo Pen Kit, please contact the seller or manufacturer directly.

An additional user manual in PDF format can be found бул жерде.