1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Deye SUN-6K-SG04LP1-EU-SM2 series single-phase hybrid inverters. These inverters are designed for solar energy systems, offering versatile power management for both grid-tied and off-grid applications. Please read this manual thoroughly before installation and operation.
Сүрөт 1: Алдыңкы view Deye гибриддик инверторунун.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: ЭЛЕКТР ТОГУ КОРКУНУЧУ. Installation and maintenance must be performed by qualified personnel only. Failure to follow these instructions may result in serious injury or death.
- Always disconnect all power sources (PV array, battery, and AC grid) before performing any service or maintenance.
- Инвертордун туура жерге туташтырылышын камсыз кылыңыз.
- Инвертор бузулган же иштебей жаткандай көрүнсө, иштетпеңиз.
- Балдарды жана уруксаты жок адамдарды инвертордон алыс кармаңыз.
- Observe all local electrical codes and standards during installation.
Figure 2: Inverter front panel showing the 'Warning electric shock' label.
3. Пакеттин мазмуну
Төмөндө көрсөтүлгөн бардык буюмдар таңгагыңызда бар экенин текшериңиз. Эгерде кандайдыр бир буюмдар жок болсо же бузулуп калса, жеткирүүчүңүзгө кайрылыңыз.
- Гибриддик инвертор x1
- Дубалга орнотуу x1
- Stainless steel anti-collision bolt M6*60 x4
- Дат баспас болоттон жасалган бекитүүчү бурама M4*12 x4
- Параллель байланыш кабели x1
- Datalogger (милдеттүү эмес) x1
- Батареянын температурасы сенсору x1
- Sensor Clamp x1
- Колдонуучунун колдонмосу x1
- Magnetic ring for battery x1
- Magnetic ring for BMS and Meter communication cable x2
- Magnetic ring for AC wires x2
- DC+/DC- Plug connectors including metal terminal xN
- Solar Photovoltaic Connector Special Spanner x1
Figure 3: Visual representation of included accessories and components.
4. Техникалык шарттар
The following tables detail the technical specifications for the Deye SUN-6K-SG04LP1-EU-SM2 series hybrid inverters.
4.1. Батарея киргизүү дайындары & PV сап киргизүү маалыматтары
Figure 4: Detailed specifications for battery and PV input.
4.2. AC Input/Output Data, Efficiency, Protection & General Data
Figure 5: Detailed specifications for AC input/output, efficiency, protection, and general data.
5. Физикалык өлчөмдөр
Refer to the diagram below for the physical dimensions of the inverter, including connectors and brackets.
Figure 6: Inverter dimensions and mounting points.
6. Орнотуу жана орнотуу
The Deye Hybrid Inverter must be installed by a certified electrician or qualified solar professional. Improper installation can lead to equipment damage, personal injury, or void the warranty.
6.1. Монтаждоо орду
- Choose a cool, dry, and well-ventilated area, away from direct sunlight and flammable materials.
- Ensure the mounting surface can support the inverter's weight (approx. 17.6-19 kg).
- Maintain adequate clearance around the inverter for proper airflow and heat dissipation.
- Mount the inverter vertically using the provided wall mounting bracket and screws.
6.2. Электрдик байланыштар
- PV туташуу: Connect the solar PV strings to the designated DC+ and DC- terminals. Observe correct polarity and voltage чектөөлөр.
- Батарея туташуу: Connect the battery bank to the battery terminals, ensuring correct polarity. The inverter supports Lead-acid or Lithium-ion batteries.
- AC тор байланышы: Connect the AC output to the main electrical panel or grid connection point.
- Туташуу жүктөө: Connect critical loads to the inverter's load output terminals.
- Байланыш байланыштары: Connect the parallel communication cable, datalogger (if applicable), battery temperature sensor, and sensor clamp as per the system design. The inverter supports RS485/RS232/CAN communication interfaces.
Refer to the detailed wiring diagrams in the full product manual for specific connection instructions.
7. Иштөө нускамалары
Once installed and all connections are verified, the inverter can be powered on.
7.1. Баштапкы ишке киргизүү
- Ensure all external DC and AC breakers are in the OFF position.
- Батарея өчүргүчтү күйгүзүңүз.
- Turn on the PV array DC switch.
- AC электр торчосунун өчүргүчүн күйгүзүңүз.
- Observe the inverter's display for status indicators.
Figure 7: Inverter display and control buttons.
7.2. Мониторинг
The inverter features a built-in display for real-time monitoring of system performance, including PV input, battery status, AC output, and fault codes. Optional dataloggers and monitoring modes (GPRS/WiFi/Bluetooth/4G/LAN) allow for remote monitoring and data logging.
8. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин инверторуңуздун оптималдуу иштешин жана узак иштөөсүн камсыздайт.
- Тазалоо: Periodically clean the inverter's exterior and ventilation openings to prevent dust accumulation, which can hinder natural cooling. Use a soft, dry cloth.
- Текшерүү: Annually inspect all electrical connections for tightness and signs of corrosion. Check cables for damage.
- Курчап турган чөйрө: Орнотуу чөйрөсү белгиленген иштөө температурасы жана нымдуулук диапазондорунда сакталышын камсыз кылыңыз.
Кандайдыр бир тейлөө иштерин жүргүзүүдөн мурун ар дайым электр кубатын ажыратыңыз.
9. Кыйынчылыктарды
Бул бөлүм жалпы маселелер боюнча жалпы жетекчиликти камсыз кылат. Татаал көйгөйлөр үчүн техникалык колдоо менен байланышыңыз.
9.1. Кубаттуулук жок
- Check if all DC and AC breakers are in the ON position.
- Фотоэлектрдик киргизүү көлөмүн текшерүүtage жана ток.
- Батареянын көлөмүн текшериңизtage жана байланыштар.
- Inspect for any fault codes displayed on the inverter screen.
9.2. Inverter Not Charging Battery
- Ensure PV input is sufficient and within operating range.
- Check battery temperature sensor connection and reading.
- Verify battery type settings in the inverter configuration.
9.3. Inverter Display Not Working
- Check the main power supply to the inverter.
- If the inverter has power but the display is blank, contact support.
10. Колдонуучунун кеңештери
- For optimal performance, ensure your PV array is clean and free from shading.
- Regularly monitor your system's performance through the display or optional monitoring platforms to identify any anomalies early.
- Keep the inverter's ventilation clear to prevent overheating, especially in warmer climates.
11. Кепилдик жана колдоо
The Deye Hybrid Inverter comes with a warranty period of 5 to 10 years. The exact warranty duration depends on the final installation site and specific terms. Please refer to the official warranty policy document for detailed information.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized Deye dealer or technical support provider.
