Dasqua SPC Plug Micro for Incremental Tools User Manual

1. Киришүү

The Dasqua SPC Plug Micro is a data processing box designed to connect incremental measuring tools to a computer for data acquisition and analysis. It facilitates efficient data transfer from digital calipers, micrometers, and other incremental gauges, enhancing precision measurement workflows.

2. Орнотуу нускамалары

Follow these steps to set up your Dasqua SPC Plug Micro:

1. Connect to Measuring Tool: Plug the micro USB end of the SPC Plug Micro cable into the data output port of your incremental measuring tool (e.g., digital caliper, micrometer).
2. Компьютерге туташуу: Insert the standard USB end of the SPC Plug Micro cable into an available USB port on your computer.
3. Power On Tool: Ensure your incremental measuring tool is powered on and ready for operation.
4. Программалык камсыздоону/драйверди орнотуу: If prompted by your operating system, install any necessary drivers for the device. You may also need specific data acquisition software compatible with your measuring tool to utilize the data output functionality. Refer to your measuring tool's documentation for software requirements.

3. Иштөө нускамалары

Once the SPC Plug Micro is correctly connected and recognized by your computer, you can begin data acquisition:

• Программаны ишке киргизүү: Open the data acquisition software on your computer that is compatible with your incremental measuring tool.
• Initiate Data Transfer: Depending on your measuring tool and software, data transfer can be initiated by pressing a dedicated data output button on the measuring tool or by a command within the software interface.
• Монитор маалыматтары: Observe the software interface to confirm that measurements are being received and displayed correctly.

4. Техникалык тейлөө

To ensure the longevity and proper functioning of your Dasqua SPC Plug Micro, follow these maintenance guidelines:

• Тазалоо: Түзмөктү таза жана чаң менен таштандылардан таза кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөк колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: Store the SPC Plug Micro in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
• Колдонуу: Handle the cable and connectors with care. Avoid bending or pulling the cable excessively, which could damage internal wiring.
• Демонтаж: Do not attempt to disassemble or repair the device yourself. This will void the warranty and may cause further damage.

5. Кыйынчылыктарды

If you encounter issues with your SPC Plug Micro, refer to the following common problems and solutions:

• Маалыматтарды өткөрүү жок:
  • Check all cable connections to ensure they are secure and fully inserted.
  • Verify that your incremental measuring tool is powered on and functioning correctly.
  • Ensure the correct drivers and data acquisition software are installed and properly configured on your computer.
  • Try connecting the SPC Plug Micro to a different USB port on your computer.
  • Restart your computer and the measuring tool.
  • Consult your measuring tool's manual for specific data output instructions.
• Түзмөк компьютер тарабынан таанылбайт:
  • Ensure the USB cable is fully inserted into both the computer and the SPC Plug Micro.
  • Check your computer's Device Manager (Windows) or System Information (macOS) for any unrecognized devices and update drivers if necessary.
  • Try connecting to a different computer to rule out a computer-specific issue.

6. Техникалык шарттар

7. Колдонуучунун кеңештери

• Калибрлөө: For optimal performance and accurate measurements, ensure your incremental measuring tools are regularly calibrated. Dasqua measuring tools are manufactured to high standards and come with a Calibration Certificate.
• Программалык шайкештик: Always use the SPC Plug Micro with data acquisition software that is specifically compatible with your incremental measuring tool for seamless integration and reliable data logging.
• Сапатты камсыздоо: Dasqua products undergo rigorous testing, including prototype, user, abnormal, and durability tests, before mass production. A strict visual inspection is applied to every finished product to ensure quality.

8. Кепилдик жана колдоо

The Dasqua SPC Plug Micro comes with a Эки жылдык кепилдик сатып алынган күндөн тартып. Бул кепилдик өндүрүштөгү кемчиликтерди камтыйт жана продукттун белгиленген аткаруу стандарттарына жооп берерин камсыздайт.

For technical support, warranty claims, or further assistance, please contact Dasqua customer service. You may reach support via WhatsApp at +8617352882023 or email at 936442401@qq.com. Please have your purchase details and product model number ready when contacting support.