WELOCK TOUCA51 Smart Lock Instruction Manual

1. Киришүү

Thank you for choosing the WELOCK TOUCA51 Smart Lock. This keyless door lock offers multiple convenient entry methods including fingerprint, keypad, RFID card, and Bluetooth app control, designed for enhanced security and ease of use in your home or office. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance of your smart lock.

2. Пакеттин мазмуну

Сураныч, бардык компоненттер бар экенин текшерүү үчүн пакетти текшериңиз:

• Smart lock cylinder (front and rear handles)
• RFID Card (3 pieces)
• Phillips screwdriver (1 piece)
• Allen key (1 piece)
• Silicone plug (2 pieces)
• Fixing screw for Thimble (1 piece)
• Battery cover screws (2 pieces)
• Front handling screws (2 pieces)
• Колдонуучунун колдонмосу (бул документ)

3. Техникалык шарттар

4. Эшиктин шайкештиги

The WELOCK TOUCA51 Smart Lock is designed for Euro profile cylinders. Please ensure your door is compatible before installation.

• Шайкеш: Euro profile цилиндр.
• Шайкеш келбейт: UK Oval cylinder, Knob cylinder, Armor door, Swiss round cylinder, Vintage door lock.

The distance between the cylinder hole and the door frame must be ≥40mm. If the center of the keyhole is less than 40mm from the door frame, installation is not possible.

5. Орнотуу жана орнотуу

The WELOCK TOUCA51 Smart Lock is designed for easy DIY installation without the need for drilling or a locksmith. Follow these steps carefully.

5.1. Adjusting the Cylinder Length

1. Loosen the screw on the cylinder with the provided screwdriver.
2. Adjust the interior and exterior length of the handle by pulling it out as needed.
3. Once the desired length is achieved, tighten the screws.
4. Plug the adjustment holes with the silicone plugs for a waterproof seal.

5.2. Батареяларды орнотуу

Кулпу 3 AAA батарейкасын талап кылат (кошулбайт).

1. Loosen the screws on the battery cover with the Allen key.
2. Дат баспас болоттон жасалган капкакты ачыңыз.
3. Батареянын капкагын ачыңыз.
4. Туура полярдуулукту камсыз кылуу менен 3 AAA батарейкасын салыңыз.
5. Батареянын капкагын жаап, бурагычтарды тартыңыз.

5.3. Физикалык орнотуу

1. Remove the fixing screw and the original cylinder from your door.
2. Take out the screws and remove the rear handle of the WELOCK smart lock.
3. Install the smart lock cylinder into the lock hole from the outside.
4. Secure the lock with the installation fixing screws.
5. Install the rear handle.
6. Fix the rear handle with its screw.

6. Иштөө нускамалары

6.1. Кулпуну ачуу ыкмалары

The WELOCK TOUCA51 Smart Lock offers multiple ways to unlock your door:

• Манжа изи кулпусун ачуу: Place your registered finger on the sensor. The lock features a built-in AI chip with a 99.8% recognition rate and a recognition time of less than 0.3 seconds. It can store up to 100 fingerprints.
• Keypad Passcode: Enter your programmed passcode on the keypad. The lock supports anti-peep passcodes, allowing you to enter random digits before or after your actual code to prevent others from guessing it.
• RFID картасы: Swipe a registered RFID card over the lock's sensor.
• Bluetooth колдонмосун башкаруу: Use the WELOCK app on your iOS or Android smartphone to unlock the door via Bluetooth.
• USB Backup Key: In case of emergency (e.g., battery depletion), connect a power bank to the lock via a USB cable to temporarily power it, then use the WELOCK app to unlock.
• Үн менен башкаруу (милдеттүү эмес): With a WIFIBOX3 gateway, you can control your lock using Alexa voice commands.

6.2. Автоматтык кулпу

The lock features automatic locking after 7-14 seconds of being unlocked, providing an extra layer of security.

6.3. App Control and Permissions

The WELOCK app allows you to manage your lock from anywhere, grant temporary access, and view unlock records. You can create up to 200 customized codes for family, friends, service, and guests.

6.4. Үн менен башкаруу (Alexa)

For a smarter home experience, integrate your WELOCK ToucA51 with Alexa. A WIFIBOX3 gateway is required for this functionality.

7. Программалоо жана орнотуулар

The lock can be programmed directly via the keypad or through the WELOCK app. The following flowcharts outline common programming tasks.

7.1. Passcode Management

• Modify Default Master Code: Change the initial '123456' master code to your personal Admin passcode.
• Modify Admin Passcode: Update your existing Admin passcode.
• Add User Passcode: Create new passcodes for individual users.
• Delete User Passcode: Remove specific user passcodes.
• Clear All User Passcodes: Erase all programmed user passcodes.

7.2. RFID картасын башкаруу

• RFID картасын кошуу: Register new RFID cards.
• RFID картасын жок кылуу: Remove specific RFID cards.
• Clear All RFID Cards: Erase all registered RFID cards.

7.3. Башка орнотуулар

• Тил орнотуулары: Switch between German, Chinese, and English.
• Үнсүз режим: Enable or disable sound feedback from the lock.
• Bluetooth күйгүзүү/өчүрүү: Toggle Bluetooth connectivity.
• Modify Default Auto Lock Time: Adjust the duration before the lock automatically engages (5-14 seconds).
• Vacation Mode (ON/OFF): Activate or deactivate vacation mode for enhanced security when away.
• Заводдук жөндөөлөрдү калыбына келтирүү: Reset the lock to its original factory settings.

8. Техникалык тейлөө

8.1. Батареяны алмаштыруу

The lock will display a "Battery Low" prompt on the screen and emit three "beep beep beep" sounds when the battery level drops below 20%. Please replace the 3 AAA batteries promptly when this alarm appears to ensure continuous operation.

8.2. Жалпы кам көрүү

Clean the lock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

9. Кыйынчылыктарды

• Lock not responding after installation: Ensure batteries are correctly installed and charged. Check that the cylinder length was adjusted properly and screws are tightened.
• Forgot default password: When you first receive the lock, modify the default password "123456" to your own admin password. If forgotten, you may need to perform a factory reset (refer to programming section).
• Cannot find lock ID: The lock ID (8-digit number) can be found on the middle of the lock body or on the product packing box.
• Батарея аз сигнализация: The alarm triggers when the battery level is below 20%. Replace batteries immediately.
• Lock is unresponsive due to dead battery: Use a power bank to charge the lock via a USB cable, then use the WELOCK app to unlock.
• Lock is temporarily locked: If you enter the wrong passcode 5 times continuously, or swipe an unmatched RFID card 5 times continuously, the system will lock for three minutes. Wait for the lockout period to expire.
• Incompatibility with Swiss round cylinder: The lock is designed for Euro profile cylinders and is not compatible with Swiss round cylinders.

10. Колдонуучунун кеңештери

• Upon receiving your lock, immediately change the default master password to a strong, unique admin password.
• Keep a record of your lock ID and admin password in a secure place.
• Regularly check the battery status and replace AAA batteries promptly when the low battery alert appears.
• For emergencies, always have a power bank readily available to use with the USB backup unlocking feature.
• The lock is generally easy to install, but ensure your door's cylinder type and dimensions match the compatibility requirements before starting.

11. Кепилдик жана колдоо

The WELOCK TOUCA51 Smart Lock comes with a 2-year warranty.

For any technical assistance or support, please contact:

Электрондук почта: Service@WelockGlobal.com

12. Кошумча ресурстар

For a detailed PDF version of the user manual, please refer to the following link:

WELOCK TOUCA51 User Manual (PDF)