HGLRC C1 Remote Controller User Manual

1. Киришүү

The HGLRC C1 Remote Controller is an entry-level, high-value handle control designed for RC airplanes and FPV drones. It features a built-in 500mW ELRS 2.4G TX module, offering stable signal transmission and extended control distance. This controller simplifies operations like frequency pairing, power adjustment, and joystick calibration, making it user-friendly for beginners and experienced pilots alike. It supports multiple simulators and can be expanded with an external NANO TX module.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before operating the HGLRC C1 Remote Controller. Failure to follow these instructions may result in injury, damage to the product, or damage to property.

• Always operate your RC aircraft in open areas, away from people, animals, and obstacles.
• Ensure the controller and aircraft batteries are fully charged before each use.
• Never operate the controller in adverse weather conditions (e.g., strong winds, rain).
• Keep the controller away from water and moisture.
• Do not attempt to modify or disassemble the controller. Repairs should only be performed by authorized service personnel.
• Контроллерди колдонбогондо салкын, кургак жерде сактаңыз.
• Батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.

3. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1x HGLRC C1 Remote Controller
• 1x Remote Control Hanging Strap
• 1x USB-C маалымат кабели
• 1x Wireless Dongle (Optional, depending on purchased version)

4. Продукт бүтүп калдыview

The HGLRC C1 Remote Controller is designed for intuitive control and ease of use. Key features include:

• Built-in ELRS 2.4G TX Module: 500mW output power with a built-in antenna for reliable long-range communication.
• Жөнөкөйлөштүрүлгөн операция: Direct controls for frequency pairing, power adjustment, and joystick calibration without needing a screen.
• Эргономикалык дизайн: Узак колдонуу үчүн ыңгайлуу кармагыч.
• Versatile Switches: Features a mix of three-stage жана эки-сtage switches for various flight modes and functions.
• Simulator Support: Compatible with multiple FPV simulators, enhanced by an optional wireless dongle.
• Bluetooth 4.2: Supports handle mode for additional connectivity options.
• External NANO TX Module Expansion: Allows for connection of third-party TX modules, automatically powering off the internal module when an external one is detected.

5. Орнотуу

5.1 Батареяны орнотуу

The HGLRC C1 Remote Controller requires two 18650 flat head batteries (not included) for operation. Please ensure correct polarity when installing.

1. Контроллердин арткы бетиндеги батарея бөлүмүн табыңыз.
2. Батарея уясынын капкагын ачыңыз.
3. Insert two 18650 flat head batteries, observing the polarity markings (+/-).
4. Батарея уясынын капкагын бекем жабыңыз.

5.2 Күйгүзүү/өчүрүү

To power on the controller, press and hold the power button located on the front face until the indicator lights illuminate. To power off, press and hold the power button again until the lights turn off.

5.3 Милдеттүү жол-жобосу

To enter binding mode for frequency pairing:

1. Ensure the receiver on your aircraft is in binding mode.
2. Quickly power the HGLRC C1 Remote Controller on and off three times.
3. The controller will enter binding mode, indicated by a specific LED pattern (refer to LED indicator section for details).
4. Once bound, the LED indicator will show a solid light.

5.4 Connecting to a Simulator

The HGLRC C1 Remote Controller supports multiple simulators. You can connect it using the provided USB-C data cable or wirelessly with the optional dongle.

Зымдуу туташуу:

1. Connect one end of the USB-C data cable to the controller's USB-C port.
2. Connect the other end to your computer's USB port.
3. The controller should be recognized as a joystick or game controller by your operating system.
4. Launch your preferred simulator and configure the controller settings.

Wireless Connection (with Dongle):

If you have the wireless dongle, you can practice simulators without cables.

1. Plug the wireless dongle into a USB-A or USB-C port on your computer.
2. Ensure the dongle is powered on and recognized by your computer.
3. The controller and dongle should automatically connect.
4. Launch your preferred simulator and configure the controller settings.

5.5 External NANO TX Module Expansion

The HGLRC C1 Remote Controller allows for external NANO TX module expansion. When an external module is connected, the built-in TX module will automatically power off.

1. Locate the NANO TX module bay on the controller.
2. Carefully insert your compatible NANO TX module into the bay.
3. Модулдун бекем орнотулганын текшериңиз.
4. The controller will automatically detect the external module and switch its transmission to it.

6. Иштөө нускамалары

6.1 Негизги башкаруу каражаттары

The HGLRC C1 features two main joysticks (rockers) for primary control inputs. These are potentiometer sensors, providing precise control.

• Джойстик калибрлөө: The controller supports joystick calibration without a screen. Refer to the LED indicator patterns for feedback during calibration.
• Кубатты жөндөө: Adjust the power output of the TX module directly from the controller.

6.2 Switches

The controller is equipped with both three-stage жана эки-сtage switches for various functions, such as arming/disarming, flight mode selection, or auxiliary controls.

• Үчtage Которуу: Provides three distinct positions for complex functions.
• Эки-сtage Которуу: Offers two positions for simpler on/off or mode toggling.

6.3 Bluetooth 4.2 Handle Mode

The HGLRC C1 supports Bluetooth 4.2 handle mode, allowing it to connect to compatible devices as a game controller.

7. Техникалык тейлөө

7.1 Орнотулган программаны жаңыртуу

Both the remote control and the optional wireless dongle support firmware upgrades.

• Алыстан башкаруу: Firmware can be upgraded via WiFi or a TYPE-C wire brush (USB-C cable).
• Wireless Dongle: Firmware can be upgraded via WiFi or USB plug.

7.2 Батареяга кам көрүү

• Charge batteries using the provided USB-C cable. The charging current is 1.2A, and a full charge takes approximately 3-4 hours.
• Avoid overcharging or completely draining the batteries.
• If storing the controller for an extended period, remove the batteries.

7.3 Тазалоо

Use a soft, dry cloth to clean the exterior of the controller. Do not use harsh chemicals or solvents.

8. Кыйынчылыктарды

• Контроллер күйбөй жатат: Батареялар туура орнотулганын жана заряддалганын текшериңиз.
• Байланыш маселелери: Confirm the receiver is in binding mode and repeat the controller's binding procedure (power on/off three times quickly).
• No response in simulator: Check USB-C cable connection or ensure the wireless dongle is properly inserted and recognized. Verify controller settings within the simulator software.
• External TX module not working: Ensure the NANO TX module is fully seated in its bay. The internal TX module should automatically disable.

9. Техникалык шарттар

9.1 Remote Control Parameters

9.2 Dongle Parameters

10. Колдонуучунун кеңештери

Based on common user experiences and questions:

• For optimal performance, ensure your controller and receiver firmware are always up to date.
• When using the wireless dongle for simulators, ensure it is securely plugged into a compatible USB port.
• Practice regularly with a simulator to improve your piloting skills without risking damage to your physical drone.
• If experiencing range issues, check for potential interference in your operating environment and ensure antennas are unobstructed.

11. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please contact HGLRC customer support through their official webсайтына же продукт сатып алынган сатуучуга кайрылыңыз. Кепилдик талаптары үчүн сатып алгандыгыңызды тастыктаган документти сактап коюңуз.