1. Продукт бүтүп калдыview
This manual provides detailed instructions for the installation, operation, and maintenance of your JINGSHA H311 LGA1151 Motherboard Kit. This kit includes a JINGSHA H311M-K motherboard, an Intel Core i3 8100 processor, and two 8GB DDR4 2666MHz PC RAM modules.
The JINGSHA H311M-K motherboard supports Intel LGA 1151 6th, 7th, 8th, and 9th generation Core, Pentium, and Celeron processors. It features dual-channel DDR4 memory support up to 32GB, multiple storage interfaces including SATA3.0, NVMe M.2, and NGFF SATA M.2, and essential I/O ports for a versatile computing experience.
Видео 1: Бүттүview of JINGSHA H311M-K Motherboard features and interfaces.
2. Орнотуу жана орнотуу
Before beginning installation, ensure your power supply is sufficient (at least 500W brand power supply recommended). Always handle components with care to prevent damage from static electricity.
2.1 CPU орнотуу
- Open the pressure bar marked on the CPU socket.
- Open the buckle cover of the CPU base.
- Carefully place the Intel Core i3 8100 processor into the LGA 1151 socket. Pay attention to the four defenses, silent notch, and gold mountain corner alignment on the CPU and motherboard. Ensure pins are not crooked.
- Re-buckle the previously opened lever to secure the CPU.
Маанилүү эскертүү:
2.2 RAM орнотуу
The motherboard features 2*UDIMM DDR4 memory sockets supporting dual channel up to 32GB. Insert the 2x8GB DDR4 2666MHz RAM modules into the designated slots. Ensure the notches on the RAM modules align with the keys in the slots, then press firmly until the clips on both ends snap into place.
2.3 M.2 SSD орнотуу
The motherboard supports both NVMe M.2 and NGFF SATA M.2 SSDs. Ensure you install the M.2 SSD correctly to prevent the interface from falling off due to stress.
2.4 Перифериялык түзүлүштөрдү жана кубаттуулукту туташтыруу
Refer to the motherboard layout diagram for connecting power, storage devices, and other peripherals.
- Кубат туташтыргычтары: 24-пин ATX кубат туташтыргычын жана 8-пин ATX 12V кубат туташтыргычын энелик платага кубат булагыңыздан туташтырыңыз.
- Сактагыч: Connect SATA 3.0 devices (HDDs/SSDs) to the 3 SATA3.0 ports.
- Алдыңкы панелдин туташтыргычтары: Connect your case's front panel headers (Power Switch, Reset Switch, Power LED, HDD LED, Front USB 2.0, Front USB 3.0, Front Audio) to the corresponding pins on the motherboard as indicated in Figure 8.
- Арткы I/O порттору:
- 2x PS/2 ports (for keyboard/mouse)
- 1x HDMI порту
- 1x VGA порту
- 2x USB 2.0 порттору
- 1x RJ45 Gigabit Ethernet порту
- 2x USB 3.0 порттору
- 3-in-1 Audio jacks
CR2032 Battery Note:
3. Иштөө нускамалары
Once all components are correctly installed and connected, you can power on your system. The motherboard will automatically detect the installed CPU and RAM. You may need to access the BIOS/UEFI setup to configure boot order, enable specific features, or adjust settings.
3.1 BIOS/UEFI мүмкүндүк алуу
To enter the BIOS/UEFI setup, press the designated key (commonly DEL, F2, or F10) repeatedly during the initial boot sequence. Consult your system's documentation or on-screen prompts for the exact key.
3.2 Драйверди орнотуу
After installing your operating system, install the necessary drivers for the motherboard's chipset, audio, LAN, and any other integrated components. Drivers can typically be found on the manufacturer's website or provided on a support disk (if included). Contact customer service to obtain BIOS files and drivers if needed.
4. Техникалык тейлөө
Proper maintenance ensures the longevity and optimal performance of your motherboard kit.
4.1 Тазалоо
- Кысылган абаны колдонуп, компьютериңиздин ичиндеги чаңды дайыма тазалаңыз.
- Ensure all fans (CPU, case, power supply) are free from obstructions.
- Do not use liquid cleaners directly on motherboard components.
4.2 BIOS жаңыртуулары
Periodically check the JINGSHA support website for updated BIOS versions. BIOS updates can improve system stability, add support for new hardware, or fix bugs. Follow the manufacturer's instructions carefully when updating the BIOS to avoid system damage.
4.3 Component Handling
When handling components, especially the CPU and RAM, avoid touching the electrical contacts. Store unused components in anti-static bags.
5. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
5.1 Memory Frequency Adjustment
The Intel Core i3 8100 processor officially supports a maximum memory frequency of DDR4 2400 MHz. If you install 2666 MHz memory modules, their operating frequency will automatically be reduced to 2400 MHz to match the CPU's specifications. This is normal behavior and does not indicate a fault with the memory or motherboard.
5.2 Система жүктөлбөй жатат / Дисплей жок
- Электр байланыштарын текшерүү: Ensure the 24-pin ATX and 8-pin ATX 12V power connectors are securely seated.
- Reseat компоненттери: Remove and re-install the CPU, RAM modules, and any expansion cards (like a graphics card if used) to ensure they are properly seated.
- CMOS батареясы: If the CR2032 battery was not installed, install one. A missing or dead CMOS battery can cause boot issues.
- Монитор туташуу: Verify your monitor is connected to the correct video output (HDMI or VGA) on the motherboard or dedicated graphics card.
- Минималдуу конфигурация: Try booting with only essential components: CPU, one RAM stick, and the power supply.
5.3 Ашыкча ысып кетүү
Ensure the CPU cooler is properly installed and making good contact with the CPU. Verify that all case fans are functioning and providing adequate airflow. Check for dust buildup that might impede cooling.
6. Техникалык шарттар
| Компонент | Өзгөчөлүк | Толук маалымат |
|---|---|---|
| Motherboard (JINGSHA H311M-K) | Форма фактору | Micro-ATX (223mm*170mm) |
| CPU розетка | LGA 1151 (Supports Intel 6th/7th/8th/9th Gen Core/Pentium/Celeron) | |
| Чипсет | Intel H110 | |
| Memory Sockets | 2x UDIMM DDR4 (1866/2133/2400/2666MHz, Dual Channel, up to 32GB) | |
| Графикалык картанын уячасы | 1x PCI-E x16, 1x PCI-E x1 | |
| Сактагыч интерфейстери | 3x SATA3.0, 1x NVMe M.2 port, 1x NGFF SATA M.2 port | |
| USB порттору | 4x USB3.0, 4x USB2.0 (Rear I/O and Onboard Headers) | |
| LAN | Onboard 1x Realtek RTL8111F Gigabit Ethernet | |
| Аудио | Realtek Audio Codec ALC897, 7.1 Sound Channel | |
| PSU Solution | ATX 24Pin + 8Pin | |
| Processor (Intel Core i3 8100) | Cores/Treads | 4 өзөк / 4 жип |
| Базалык жыштык | 3.60 ГГц | |
| Кэш | 6 MB | |
| Технология | 14нм | |
| Процессордук графика | Intel UHD Graphics 630 | |
| Memory (DDR4 RAM) | Type | DDR4 Desktop Memory |
| Жыштык | 2666MHz (operates at 2400MHz with i3-8100) | |
| Кубаттуулугу | 16GB (2x8GB) | |
| Пакеттин өлчөмдөрү | Узундук | 32 см |
| Туурасы | 29 см | |
| Бийиктик | 6 см |
7. Кепилдик жана колдоо
Your JINGSHA H311 LGA1151 Motherboard Kit comes with the following warranty:
- CPU: 1-year warranty. Ensure the warranty label on the back of the CPU is not removed or damaged.
- Эстутум: 1 жылдык кепилдик.
- Motherboard: Please refer to the seller's specific warranty terms.
For technical support, BIOS files, or drivers, please contact the SZ computer accessories Store customer service. They can provide assistance and necessary files for your motherboard.
8. Колдонуучунун кеңештери
- Шайкештикти текшерүү: Always double-check component compatibility (e.g., CPU generation, RAM type, M.2 SSD type) before purchase and installation to ensure smooth operation.
- Электр камсыздоо: A stable and sufficient power supply is crucial for system stability. Do not underestimate the power requirements for your PC build.
- Статикалык разряд: Before handling any internal PC components, discharge static electricity by touching a grounded metal object (like your PC case).
