Introduction
This manual provides detailed instructions for the ECHTPower ES01 wireless game controller. It covers setup, connection, operation of various features, maintenance, and troubleshooting. Please read this manual thoroughly before using your controller to ensure optimal performance and longevity.
For a complete PDF version of this manual, please refer to the official user manual available at ECHTPower ES01 User Manual (PDF).
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- Wireless Controller x 1
- Заряддоо кабели x 1 (USB-C)
- Колдонмо колдонмо x 1
Техникалык шарттар
Техникалык параметрлер
| Параметр | Нарк |
|---|---|
| Электр камсыздоо | Камтылган полимердик батарея |
| Колдонуу убактысы | 10-16 саат |
| Батарея сыйымдуулугу | 800mAh |
| Заряддоо убактысы | 2.5 саат |
| Заряддоо Voltage | DC 5V |
| Заряддоо агымы | 250мА |
Шайкеш платформалар
- Nintendo Switch (including Switch 2, Switch OLED, Switch Lite)
- PC
- Android
- iOS
Controller Layout
Familiarize yourself with the buttons and features of your ECHTPower ES01 controller:
- Үй баскычы: Контроллерди күйгүзөт/өчүрөт, башкы экранга кайтарат.
- Turbo Button (+ Button): Activates/deactivates turbo functions.
- Screen Capture Button (- Button): Скриншотторду тартат.
- A/B/X/Y баскычтары: Стандарттык аракет баскычтары.
- Сол жактагы джойстик / L3: Left analog stick, L3 button when pressed.
- Оң жактагы джойстик / R3: Right analog stick, R3 button when pressed.
- D-под: Багыттоочу такта.
- M баскычы: Used for macro programming.
- R/L Buttons: Ийин баскычтары.
- ZR/ZL Buttons: Триггер баскычтары.
- Type-C заряддоо порту: Контроллерди заряддоо үчүн.
- Каналдын LED: Indicates connection status and player number.
- ML/MR Buttons: Программалануучу арткы баскычтар.
- Vibration Switch: Adjusts vibration intensity.
- Light Switch Key: Controls RGB lighting.
Орнотуу жана туташуу
Баштапкы активдештирүү
Before initial use, the controller must be charged using the provided USB-C data cable to activate its internal battery.
Күйгүзүү/өчүрүү
- Күйгүзүү: жеңил басыңыз Үй баскычы.
- Өчүрүү: жеңил басыңыз Жупташуу баскычы.
Connection Methods for Various Devices
| Платформа | Туташуу ыкмасы | Power On Combination | Түзмөктүн аталышы | Индикатор жарыктары |
|---|---|---|---|---|
| Которуу | Зымдуу | USB Direct Plug | Automatic channel indicator light | Automatic channel indicator light |
| Bluetooth | Жупташтыруу баскычын 3 секунд басып туруңуз | Automatic channel indicator light | Automatic channel indicator light | |
| PC | Зымдуу Xinput | USB direct insertion | Xbox 360 контроллери | LED1+LED4 |
| Wired Dinput | Long press '+' and '-' in Wired Xinput mode | Gamepad | LED2+LED3 | |
| Bluetooth Xinput | Y + pairing button | Xbox 360 контроллери | LED1+LED4 | |
| Bluetooth Dinput | X + pairing button | Gamepad | LED2+LED3 | |
| iOS | Bluetooth | Y + pairing button | Xbox 360 контроллери | LED1+LED4 |
| Android | Bluetooth | X + pairing button | Gamepad | LED2+LED3 |
Эскертүү: When connecting to the Switch via wired connection, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.
Иштөө нускамалары
Turbo Rapid Fire Function
Supported buttons: A/B/X/Y/L/R/ZL/ZR/D-pad
- Кол менен турбо: кармаңыз T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
- Автоматтык турбо: кармаңыз T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
- Turbo өчүрүү: кармаңыз T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
- Clear All Turbo Settings: басып, кармап туруңуз T button for 3 seconds to clear rapid fire settings for all buttons.
- Ылдамдыкты жөндөө: Rapid fire speed can be adjusted to fast, medium, or slow. Default is slow. Hold the T button on the controller and simultaneously move the right joystick up or down to adjust the speed.
Macro Setting for Back Buttons (ML/MR)
Supported buttons for mapping: A/B/X/Y/L/R/ZL/ZR/L3/R3/D-PAD
- Программалоо режимине кирүү: басып, кармап туруңуз M button for 2 seconds. The left and right 3D rings will slowly flash (if LED effects are enabled), indicating the controller has entered programming mode.
- Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
- Programming Confirmation: Басыңыз ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
- Эскертүү: You can program up to 16 button inputs. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
- Clearing Settings: кармагандан кийин M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.
Light Adjustment (RGB Lighting)
- Light Key + R3: Switch between 3 lighting modes: Steady, Breathing/Running Horse, Rainbow.
- Light Key + L3:
- In Steady mode: Switch colors.
- In Breathing/Running Horse mode: No effect.
- In Rainbow mode: Pause rainbow effect.
- Reset Lights to Default: басыңыз + жана Турбо buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset.
- Turn Off/On Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.
Vibration Adjustment
- Интенсивдүүлүктү жөндөө: After connecting the controller, hold the Vibration Switch button on the back of the controller while moving the left 3D joystick up or down. This will increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
- Disable/Re-enable Vibration: басып, кармап туруңуз Vibration Switch for 10 seconds to disable the vibration function of both motors. Press and hold it again for 10 seconds to re-enable.
Холл эффектисинин джойстиктери
The ES01 controller features Hall Effect joysticks, which use electromagnetic sensors for precise position detection, significantly reducing the common issue of joystick drift and enhancing durability.
Заряддоо жана Батарея
Контроллерди заряддоо
Connect the provided USB-C charging cable to the controller and a compatible USB power adapter (DC 5V). The charging indicator will glow orange while charging. Once fully charged, the orange indicator will turn off.
Төмөн батарея көрсөткүчү
When the battery is low, the light of the current channel (player indicator) will flash quickly to remind you to charge the controller.
Күтүү режими
- Кол менен күтүү режими: When the controller is powered on, short press the Жупташуу баскычы күтүү режимине өтүү.
- Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
- Automatic Standby (Inactivity): When connected to a console, the controller will automatically enter standby mode after 15 minutes of inactivity.
Контроллерди баштапкы абалга келтирүү
If the controller malfunctions or becomes unresponsive, you can perform a reset:
- басып, кармап туруңуз Үй button for 10 seconds. This will reset the controller to its default state.
Колдонуучу сунуштар
- NFC/Amiibo Compatibility: The ECHTPower ES01 controller does not support NFC for Amiibo functionality. Please use official Nintendo controllers if this feature is required.
- Оптималдуу аткаруу: For the best gaming experience, ensure your controller is fully charged before extended play sessions.
- Ыңгайлаштыруу: Experiment with the RGB lighting and vibration settings to find your preferred setup for different games.
Проблемаларды чечүү
- Контроллер жооп бербей жатат: Try resetting the controller by holding the Home button for 10 seconds. Ensure it is charged.
- Туташуу маселелери: Double-check the connection method for your specific device (refer to the 'Connection Methods' table). For Switch wired connection, verify the 'Pro Handle Wired Connection' setting is enabled.
- Джойстик дрейфи: The ES01 features Hall Effect joysticks designed to prevent drift. If you experience any issues, try resetting the controller. If the problem persists, contact support.
- Жарыктар иштебейт: Ensure the lighting feature is enabled (Light Key + R3). If still not working, try resetting the lights by pressing + and Turbo simultaneously for 3 seconds.
- Вибрация иштебей жатат: Check if the vibration function is enabled by holding the Vibration Switch for 10 seconds to toggle it. Adjust intensity if needed.
Кепилдик жана колдоо
The ECHTPower ES01 controller comes with a 12-month warranty for worry-free gaming.
Байланыш маалыматы
- Өндүрүүчү: Shenzhen Mike Morgen Technology Co., Ltd
- Дарек: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
- Телефон: 0755-21010839
- Электрондук почта: service@echtpower.com
- Webсайт: www.echtpower.com
- FCC ID: 2A88F-ES01
Our support team is available 24/7 to assist you. We aim to resolve all issues within 24 hours.
