Sunster 8KW All-in-One Diesel Air Heater User Manual

1. Киришүү

The Sunster 8KW All-in-One Diesel Air Heater is designed to provide efficient heating for various applications, including RVs, motorhomes, caravans, trucks, and other outdoor or indoor spaces. It helps eliminate damage to vehicles caused by sudden temperature drops, improves interior warmth, preheats engine coolant to prevent wear, and assists with defrosting windows and preventing fogging.

This heater features multiple control methods, including an intelligent LCD panel, remote control, and Bluetooth app connectivity, offering convenience and versatility. It is adaptable to various voltage environments (DC12V/24V and AC110-240V) and is built with a robust aluminum body for durability and efficient heat transfer.

2. Коопсуздук маалыматы

• Ensure all accessories are complete and undamaged before installation and operation.
• When installing the exhaust pipe, ensure that any flammable objects in contact with it are protected with thermal insulation material.
• The exhaust pipe must be kept straight and not tilted upward to ensure smooth and safe exhaust.
• Ар дайым томду колдонуңузtage specified for the product (DC 12V/24V or AC 110-240V) to prevent damage.
• The product is certified by UL, FCC, and CE, ensuring compliance with safety standards.

3. Пакеттин мазмуну

Сураныч, бардык буюмдар бар экенине ынануу үчүн пакетти кылдат текшериңиз:

• 1 x Air Diesel Heater
• 1 x Алыстан башкаруу
• 1 х аба чыпкасы
• 1 x Fixed plate
• 1 x Колдонуучунун колдонмосу
• 1 x Кирүүчү түтүк
• 1 x Exhaust pipe
• 1 x 6.9ft flexible and stretchable Air Outlet Pipe
• 1 x Battery Power Cord
• 1 x Fixture Accessories Set
• 1 x AC110-240V power adapter (EU/UK/US PLUG)
• 1 x Унчукчу
• 1 x Foot stand (New accessories)

4. Техникалык шарттар

5. Орнотуу жана орнотуу

This section provides step-by-step instructions for setting up your Sunster 8KW All-in-One Diesel Air Heater. For a visual guide, please refer to the installation video below.

5.1. Unpacking and Initial Check

1. Аксессуарларды текшерүү: After unpacking, verify that all accessories listed in the 'Package Contents' section are present and undamaged.
2. Attach Foot Stand: Align the bottom corner of the foot stand with the holes on both sides of the machine's bottom. Use a soft hammer to gently tap the foot stand into place.

5.2. Preparing Mounting Surface

3. Measure Pipe Distance: Measure the distance between the intake pipe and the exhaust pipe interfaces on the heater.
4. Тешиктерди белгилөө жана бургулоо: Mark the corresponding positions on your mounting surface (e.g., floor of RV) and punch holes for the intake and exhaust pipes.
5. Сыноо ылайыктуу: Temporarily place the heater with the exhaust and intake pipes through the punched holes to ensure a normal fit. Mark the bottom corner holes for the foot stand.
6. Drill Foot Stand Holes: Punch holes at the marked positions for the foot stand.

5.3. Installing Exhaust and Intake Pipes

7. Exhaust Pipe Installation:
   • Straighten the exhaust pipe.
   • cl койamp on one end of the exhaust pipe.
   • Клamped end into the bottom left interface of the heater.
   • Клamp коопсуз.
8. Intake Pipe Installation:
   • Take out the intake pipe and put a clamp бир четинде.
   • Клamped end into the bottom right interface of the heater.
   • Клamp коопсуз.
9. Secure Heater: Put screws through the foot stand holes and secure them with nuts from underneath the mounting surface.
10. Аба чыпкасын орнотуу:
    • cl койamp on the free end of the intake pipe.
    • Screw the air filter into the intake pipe.
    • Клamp.
    • Attach the fixing plate to the intake pipe sleeve and secure it with fixing screws using a drill or appropriate equipment.
11. Install Silencer:
    • cl койamp on the free end of the exhaust pipe.
    • Screw the silencer into the exhaust pipe.
    • Клamp.
    • Attach the fixing screw and right-angle fixing plate to the silencer and secure it with a nut and yellow screws using a drill or appropriate equipment.

5.4. Installing Heating Ducts

12. Open Duct: Open the flexible heating duct.
13. Attach Duct: Клamp at the duct interface on the heater. Install the duct at the air outlet interface.
14. Secure Duct: Клamp to fix the heating duct in position.

5.5. Кубатты туташтыруу

15. Power Adapter Connection (AC):
    • Connect the power adapter to the heater.
    • Remove the machine terminal position cover.
    • Place the wire copper ring (red for positive, black for negative) in the corresponding color terminal and tighten it.
    • Remove the plastic sleeve from the power adapter plug.
    • Connect the plug to a patch panel. The power adapter indicator should turn green.
16. Battery Connection (DC):
    • Use double-ended terminals (battery power cord).
    • Remove the machine terminal position cover.
    • Place the positive and negative copper rings in the corresponding color terminals and tighten them.
    • Ensure to use the voltage specified in the product (DC 12V or 24V).

6. Операция

The Sunster 8KW Diesel Air Heater offers multiple control methods and operating modes for optimal heating performance.

6.1. Башкаруу ыкмалары

• LCD дисплей экраны: Интегралдык ЖК панели жылыткычтын абалын түздөн-түз көзөмөлдөөгө жана көзөмөлдөөгө мүмкүндүк берет.
• Алыстан башкаруу: A remote control is included for convenient operation from a distance of up to 164 ft (50 meters).
• Bluetooth колдонмосун башкаруу: Download the 'Sunster' app from Google Play (Android) or the App Store (iOS) to control the heater via Bluetooth within 98 ft (30 meters). The app offers automatic, manual, and manual refueling modes.

6.2. Operating Modes (S-A2302B)

• Желдетүү режими: The fan operates without heating, circulating air. Wind speed can be set from 1 to 10 gears.
• Gear режими: Heating according to a set gear (1-10 gears).
• Strong Heating Mode: Heater runs at maximum output power for up to 2 hours.
• Температураны көзөмөлдөө режими: Operation gear adjusts automatically based on the difference between set and ambient temperature. The lowest operating gear is 1, and it does not stop. Temperature setting range: 8°C-36°C.
• Туруктуу температура режими: Similar to temperature control mode. If ambient temperature is 2°C higher than set, heating stops. If ambient temperature is 2°C lower than set, heating automatically resumes.

6.3. Негизги операция

1. Күйгүзүү: In shutdown mode, press the power button to turn on. The LCD screen will display the current status.
2. Өчүрүү: In running state, press the power button to turn off. The LCD screen will turn off after shutdown.
3. Режим которуу: In running state, press the knob to switch between different modes.
4. Параметрди тууралоо: Rotate the knob to adjust the setting gear or temperature.
5. View Carbon Monoxide Value: In running state, press the knob twice to view the current CO value, then press the power button to exit. (Requires specific CO remote control A2422).

6.4. Режимди коюу

In the running state, press and hold the power button for 3 seconds to enter setting mode. Rotate the knob to select setting items. Press the knob to enter/confirm, rotate to adjust value, press again to save, and finally press the power button to exit.

• F0: Учурдагы убакытты жөндөө
• F1: Убакытты баштоо убактысын жөндөө
• F2: Иштөө убактысын койгондон кийин убакытты баштоо
• F3: Убакыт функциясын күйгүзүү же өчүрүү
• F4: Үн берүү үн жөндөөсү (RU for Russian, EN for English, GE for German, OF for voice off)
• F5: Айлана-чөйрөнүн температурасын компенсациялоо жөндөөсү (-9°C to 9°C, default 0°C)
• F6: Күйүүчү май багындагы майдын деңгээлин жөндөө
• F7: Күйүүчү май насосунун түрүн жөндөө
• F8: Туруктуу температура режиминин функциясын жөндөө
• F9: Температура бирдигинин которулуу жөндөөсү (Fahrenheit/Celsius)
• FA: Арткы жарыктын жарыктык деңгээлин жөндөө (0-100, default 100)
• Fb: Толук резервуар сүрөтчөсүн орнотуу (for refueling)
• FC: Carbon monoxide alarm value setting (0-500, default 0/off; requires A2422 CO remote control)

6.5. Remote Control Quick Pairing

When the device is powered on, press the power button (▲) for 3 seconds. The screen will display 'P - 0 1'. Press any button on the remote control to successfully match. The screen will automatically return to the running interface upon success.

6.6. Forced Oil Pumping

If the heater is installed for the first time or the fuel line is not completely filled, use forced oil pumping. Disconnect the switch power supply, wait over 10 seconds, then turn on the power. After the LCD screen goes out, press and hold the knob for about 5 seconds to enter forced oil pumping mode. The oil pump will operate at a higher frequency. The LCD screen counts down from 300 seconds. When the countdown ends, the mode exits automatically, or you can press the power button to exit.

7. Техникалык тейлөө

• Май куюу: When the fuel tank icon indicates low fuel, use the 'Full tank function' (Fb setting) to refill the tank.
• Аба агымын текшерүү: Regularly check the air inlet and outlet for any blockages to ensure proper airflow and prevent overheating.
• Күйүүчү май системасын текшерүү: Periodically check the fuel tank for fuel level and ensure the fuel pipe is not blocked.
• Жалпы тазалоо: Жылыткычтын сыртын таза жана чаңдан жана таштандылардан таза кармаңыз.

8. Troubleshooting (E Code Display)

The LCD display provides error codes to help diagnose issues. Refer to the table below for common fault types and their solutions:

9. Колдонуучунун кеңештери

• Ventilation Feature: Utilize the ventilation mode on hot days or to prevent moisture buildup in your RV or caravan, as it circulates air without heating.
• Акылдуу термостат: Алдын алаtage of the automatic start/stop feature for constant temperature and energy efficiency. The heater will turn off when the set temperature is reached and reactivate when it drops.
• Bluetooth башкаруу: For maximum convenience, use the 'Sunster' app to control your heater remotely, preheat your vehicle, or adjust settings from up to 98 feet away.
• Күйүүчү майдын натыйжалуулугу: The heater is designed for low fuel consumption, using approximately 1 gallon of diesel per night to heat a large area, making it cost-effective for extended use.
• Тынч иштөө: The low-noise design, featuring quiet fans and low-frequency vibration oil pumps, ensures a peaceful and comfortable environment.
• Күчтүү дизайн: The aluminum alloy construction ensures fast heating, good heat dissipation, minimal carbon deposition, and a long service life.
• Ар тараптуу күч: The universal dual power input (12V/24V DC & 110V-240V AC) allows seamless switching between vehicle and household power, making it suitable for various settings.
• Негизги кронштейн: The included 140mm base bracket simplifies installation and helps prevent exhaust gas blockages, ensuring reliable operation.

10. Колдоо жана кошумча маалымат

Sunster is committed to providing quality products and excellent customer service. All products are certified by CE, WEE, FCC, EAC, and UKCA, ensuring compliance with authoritative standards.

For any issues or inquiries, our 24-hour online after-sales service team is available. You can contact store customer service directly or send an email to cs@sunster.tech. For business-related matters, please contact sunster@sunster.tech.

PDF форматындагы комплекстүү колдонуучу нускаманы жүктөп алуу үчүн жеткиликтүү: Колдонуучунун колдонмосу (PDF)