1. Киришүү
This instruction manual provides detailed guidance for assembling and maintaining your Robotime 3D Wooden Puzzle building model. These DIY kits allow you to construct intricate replicas of famous architectural landmarks such as the Big Ben, Tower Bridge, and a Five-Storied Pagoda. Each model is designed to stimulate spatial imagination, improve graphic recognition, and enhance observation and hand-eye coordination skills, offering an engaging and educational experience for both children and adults.
2. Коопсуздук маалыматы
- Мункунуп калуу коркунучу: Бул продукт майда бөлүктөрдөн турат жана 3 жашка чейинки балдар үчүн ылайыктуу эмес.
- Жашы боюнча сунуш: Recommended for ages 14 and above. Children aged 8 and older can assemble with adult supervision or guidance.
- Материалдар: The puzzle pieces are made from environmentally friendly, non-toxic, and recyclable wood.
- Батареянын коопсуздугу: If your model includes LED lights, ensure batteries are installed correctly according to polarity. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly.
3. Пакеттин мазмуну
Each Robotime 3D Wooden Puzzle kit typically includes:
- Pre-cut wooden puzzle sheets (number of pieces varies by model: e.g., Tower Bridge 113 pieces, Big Ben 220 pieces, Pagoda 275 pieces).
- English instruction manual with detailed assembly steps.
- LED light components (for models featuring illumination).
- All necessary components for assembly, except batteries.
4. Монтаждоо боюнча нускамалар
Follow these general steps for assembling your 3D wooden puzzle. Refer to the specific English instruction manual included in your kit for model-specific details and diagrams.
- Таңылганын ачуу: Carefully remove all wooden sheets and the instruction manual from the package.
- Бөлүктөрдү аныктоо: Familiarize yourself with the pieces by comparing them to the diagrams in the manual. The pieces are precision laser-cut and should pop out easily. Do not force pieces if they resist.
- Assemble Step-by-Step: Follow the numbered steps in the instruction manual. The assembly typically involves interlocking pieces without the need for glue or additional tools.
- LED Light Installation (if applicable): If your model includes LED lights, install them as directed in the manual. This usually involves threading wires through designated channels and securing the battery compartment.
- Туташуу компоненттери: Ensure all interlocking tabs and slots are securely fitted. Gentle pressure may be required.
5. Колдонуу боюнча нускамалар (LED чырактары)
For models equipped with LED lights:
- Батареяга талап: You will need to provide your own batteries. Refer to your specific model's manual for the correct battery type and quantity (e.g., AA, AAA).
- Батарея орнотуу: Locate the battery compartment, typically at the base or a hidden section of the model. Open the compartment, insert the batteries according to the polarity indicators (+/-), and close the cover securely.
- Жандандыруу: Locate the power switch, usually a small button or toggle, on the model. Flip or press it to turn the LED lights on or off.
6. Техникалык тейлөө
- Тазалоо: Dust the model gently with a soft, dry cloth. Avoid using water or cleaning solutions, as they may damage the wood.
- Сактагыч: Store the assembled model in a dry environment away from direct sunlight and extreme temperature changes to prevent warping or fading of the wood.
- Демонтаж: While designed for assembly, frequent disassembly and reassembly are not recommended as it may loosen the joints over time.
7. Кыйынчылыктарды
- Missing or Defective Pieces: If you find any pieces are missing or defective upon opening the package, please contact customer support immediately.
- Тийишпеген бөлүктөр: Ensure you are using the correct pieces for the current step as indicated in the manual. Do not force pieces; check for proper alignment. If a piece is slightly tight, gentle wiggling or light sanding (with fine-grit sandpaper, not included) may help, but proceed with caution.
- LED жарыктары иштебейт:
- Батареялардын туура полярдуулукта жана туура орнотулганын текшериңиз.
- Ensure batteries are new and fully charged.
- Verify that the power switch is in the "ON" position.
- Inspect wiring for any disconnections (if accessible and safe to do so).
8. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Бренд | Робот убактысы |
| Материал | Жыгач |
| Тема | Имараттар |
| Гендер | Unisex |
| Origin | Материк Кытай |
| Сунушталган Жаш | 14+ years (8+ with adult supervision) |
| Model: Tower Bridge (TG412) | 113 pieces, Assembled Size: 14.1 x 2.9 x 4.6 inches |
| Model: Big Ben (TG507) | 220 pieces, Assembled Size: 3.9 x 4.2 x 7.5 inches |
| Model: Pagoda (TGN02) | 275 даана |
| Пакеттин өлчөмдөрү | 36 см (L) x 16 см (W) x 32 см (H) |
| Пакет Салмагы | 0.42 кг |
9. Колдонуучунун кеңештери
Re'ден колдонуучунун конкреттүү кеңештери болгон жокviews or Q&A for this product. However, here are some general tips for an optimal building experience:
- Сабыр негизги болуп саналат: Чогултууга шашылбаңыз. Шашылыштык бөлүктөрдүн сынып калышына же туура эмес туташууларга алып келиши мүмкүн.
- Бөлүмдөрдү уюштуруу: Before starting, sort pieces by number or shape to make the assembly process smoother.
- Процесстен ырахат алыңыз: This is a creative and educational activity. Embrace the challenge and the satisfaction of building something with your own hands.
- Персоналдаштыруу: Feel free to customize your model with paint or other decorative elements once assembled, if desired.
10. Кепилдик жана колдоо
Robotime is committed to providing high-quality products and dedicated after-sales support. If you encounter any issues with your puzzle kit, such as missing or defective pieces, or require assistance with assembly, please do not hesitate to contact our customer service team. We are here to ensure your puzzle experience is seamless and enjoyable.
