G7 Wireless Gaming Controller User Manual

1. Киришүү

Thank you for choosing the G7 Wireless Gaming Controller. This high-performance controller is designed to provide a superior gaming experience across multiple platforms, including PC, Nintendo Switch, iOS, Android, and PlayStation 4. Featuring Hall Effect joysticks and triggers, dual vibration motors, 6-axis motion sensing, and a 1000Hz polling rate, the G7 offers precise control and immersive feedback. Please read this manual carefully to ensure proper setup and optimal use of your new controller.

2. Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

• G7 зымсыз оюн контроллери
• USB Type-C кабели
• 2.4G Wireless Receiver (if applicable to your model)
• Колдонуучунун Колдонмосу (бул документ)

3. Controller Layout

Familiarize yourself with the buttons and features of your G7 controller:

1. Сол джойстик: Hall Effect 3D joystick for precise movement.
2. D-под: Micro-motion cross directional key for agile control.
3. БӨЛҮШҮҮ баскычы: For sharing content (platform-dependent).
4. TURBO баскычы: Activates continuous firing for assigned buttons.
5. Үй баскычы: Powers on/off, accesses system menus, and reconnects.
6. Оң Джойстик: Hall Effect 3D joystick for precise aiming/camera control.
7. ABXY баскычтары: Micro-motion mechanical buttons for fast, crisp input.
8. ПАРАМЕТРЛЕР баскычы: Accesses in-game menus (platform-dependent).
9. M1 Button (Back Key): Programmable macro button.
10. M2 Button (Back Key): Programmable macro button.
11. L1 баскычы: Left bumper.
12. L2 баскычы: Left Hall Effect trigger.
13. R1 баскычы: Right bumper.
14. R2 баскычы: Right Hall Effect trigger.
15. Тип-C Port: Зымдуу туташуу жана кубаттоо үчүн.
16. Режим которуу: Selects connection mode (V3/M/X/S/2.4G).

4. Орнотуу жана туташуу

Before connecting, ensure the mode switch on the back of the controller is set to the appropriate platform.

4.1. Nintendo Switch туташуусу

• Биринчи туташуу:
  1. On your Switch, go to "System Settings" > "Controllers and Sensors" > "Pro Controller Wired Communication" and set to "On".
  2. Navigate to "Controllers" > "Change Grip/Order".
  3. Set the controller's mode switch to "S" (Switch mode).
  4. Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
  5. The controller will automatically pair. Once connected, the corresponding channel indicator will light up.
• Кайра туташуу:
  1. Set the controller's mode switch to "S".
  2. Press the HOME button. The controller will automatically reconnect.

4.2. PC Connection

• Зымдуу туташуу:
  1. Set the controller's mode switch to "X" (X-input mode).
  2. Connect the controller to your PC using the provided Type-C cable.
  3. The PC will recognize the controller as an X-input device.
• 2.4G зымсыз байланыш:
  1. 2.4G кабыл алгычын компьютериңиздеги жеткиликтүү USB портуна сайыңыз.
  2. Set the controller's mode switch to "2.4G".
  3. Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
  4. The controller will automatically pair with the receiver. The corresponding channel indicator will light up upon successful connection.

4.3. Android Connection (Bluetooth)

• Set the controller's mode switch to "M" (MFI mode, typically functions as standard Bluetooth for Android).
• Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
• On your Android device, go to Bluetooth settings and search for "G7 Controller".
• Select and pair. The corresponding channel indicator will light up.

4.4. iOS Connection (Bluetooth)

• Set the controller's mode switch to "M" (MFI mode).
• Press and hold the HOME button for 3 seconds until the indicator lights flash quickly.
• On your iOS device, go to Bluetooth settings and search for "Xbox Wireless Controller" (or similar MFI name).
• Select and pair. The corresponding channel indicator will light up.

4.5. PS4 туташуусу

• Биринчи туташуу:
  1. Connect the controller to your PS4 console using the Type-C cable.
  2. HOME баскычын басыңыз.
  3. Follow the on-screen instructions to register the controller.
  4. Once registered, you can disconnect the cable for wireless play.
• Reconnect (Wireless):
  1. Set the controller's mode switch to "V3" (PS4 mode).
  2. Press the HOME button. The controller will automatically reconnect.

5. Иштөө нускамалары

5.1. ТУРБО функциясы

The TURBO function allows for rapid, continuous input of a button press.

1. Press and hold the TURBO button.
2. While holding TURBO, press the desired action button (A/B/X/Y/L1/R1/L2/R2/D-pad directions).
3. Release both buttons. The selected action button will now have the TURBO function enabled.
4. To cancel the TURBO function for that button, repeat steps 1-3.

5.2. Macro Programming (M1/M2 Back Keys)

The M1 and M2 back keys can be programmed to execute a sequence of button presses.

1. Press and hold the "SET" button (refer to controller diagram for location, usually a small button on the back).
2. While holding "SET", press either M1 or M2. The indicator light will flash slowly.
3. Input the sequence of buttons you wish to program (e.g., A, B, X, Y, D-pad, L1, R1, L2, R2).
4. Press "SET" again to save the macro. The indicator light will stop flashing.
5. To execute the macro, simply press the programmed M1 or M2 button.
6. To clear a macro: Press and hold "SET", then press M1 or M2, then press "SET" again without inputting any buttons.

5.3. Вибрацияны жөндөө

The G7 controller features fine-tuned dual vibration motors for immersive feedback. The intensity of the vibration can typically be adjusted through a combination of buttons (e.g., TURBO + D-pad Up/Down). Refer to the full PDF manual for specific instructions on adjusting vibration levels.

5.4. 6-Axis Motion Sensing

The controller is equipped with 6-axis motion sensing, allowing for intuitive control in games that support tilt and motion inputs. This feature is automatically active when supported by the connected platform (e.g., Nintendo Switch).

6. Батарея маалыматы

The G7 controller is equipped with a 600mAh high-capacity battery for extended gameplay.

• Заряддоо: Connect the controller to a power source (e.g., PC USB port, USB wall adapter) using the provided Type-C cable. The indicator lights will show charging status and turn off or change color when fully charged.
• Батареянын иштөө мөөнөтү: A full charge provides several hours of gameplay, depending on usage and vibration intensity.
• Батареянын аздыгы жөнүндө эскертүү: The controller's indicator lights may flash to indicate a low battery level.

7. Техникалык шарттар

8. Техникалык тейлөө

• Тазалоо: Башкаргычты тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Өтө кир болсо, бир аз сүртүңүзampчүпүрөктү суу же жумшак тазалоо эритмеси менен жууп салыңыз. Катуу химиялык заттарды же абразивдүү материалдарды колдонбоңуз.
• Сактагыч: Контроллерди түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Таасирден качуу: Башкаргычты түшүрүп албаңыз же катуу соккуга дуушар кылбаңыз, анткени бул ички компоненттерге зыян келтириши мүмкүн.
• Кабельге кам көрүү: Handle the Type-C cable carefully. Avoid bending or twisting it excessively.

9. Кыйынчылыктарды

9.1. Контроллер туташпай жатат

• Ensure the mode switch on the back of the controller is set to the correct platform (V3 for PS4, M for Android/iOS, X for PC X-input, S for Switch, 2.4G for PC 2.4G wireless).
• Make sure the controller is charged. Connect it via Type-C cable to charge.
• For wireless connections, ensure the controller is in pairing mode (holding HOME button for 3 seconds until lights flash).
• For 2.4G wireless, ensure the receiver is properly plugged into the device.
• For Bluetooth, ensure Bluetooth is enabled on your device and the controller is discoverable.
• Try restarting the host device (PC, Switch, PS4, phone).

9.2. Joystick Drift

• The G7 controller uses Hall Effect joysticks, which are designed to prevent drift. If you experience drift, ensure the controller's firmware is up to date (check the manufacturer's website if available).
• Try recalibrating the joysticks through your device's system settings if an option is available.

9.3. Вибрация иштебей жатат

• Ensure the game or application supports vibration feedback.
• Check if vibration is enabled in the game's settings or your device's system settings.
• Verify that the vibration motors are not disabled or set to minimum intensity (refer to the full manual for adjustment instructions).

9.4. Buttons Unresponsive

• Ensure the controller is properly connected and powered on.
• Check if any buttons are stuck or physically obstructed.
• If using TURBO or Macro functions, ensure they are configured correctly or try disabling them to test basic button functionality.

10. Кепилдик жана колдоо

Кепилдик жөнүндө маалымат, техникалык колдоо же тейлөө боюнча суроолор үчүн, сатуучунун саясатын караңыз же продуктуну сатып алган сатуучуга кайрылыңыз. Кепилдик боюнча дооматтар үчүн сатып алууну тастыктаган документти сактап коюңуз.

A PDF version of the user manual is available for download at: G7 Wireless Controller User Manual (PDF)