1. Киришүү
This manual provides essential information for the installation, operation, and maintenance of your ANANDA D13 LCD Remote Kit Display for electric bikes. The D13 display is designed to provide key information and control functions for your e-bike system.
Figure 1: ANANDA D13 LCD Display Overview
2. Орнотуу жана орнотуу
Important: The ANANDA D13 LCD Remote Kit Display is a customized product. Before installation, please ensure compatibility with your e-bike system. Contact your seller if you have any doubts or require specific configuration information.
2.1 Пакеттин мазмуну
- ANANDA D13 LCD Display Unit
- Integrated connecting cable with 5-pin connector
- Орнотуу кронштейни (алдын ала бекитилген же өзүнчө)
2.2 Дисплейди орнотуу
- Identify a suitable location on your handlebar for the display. Ensure it does not obstruct your view же велосипедди башкаруу.
- Secure the display's mounting bracket to the handlebar using the provided screw. Tighten securely but do not overtighten.
- Adjust the angle of the display for optimal visibility.
2.3 Дисплейди туташтыруу
- Locate the corresponding connector on your e-bike's wiring harness. This is typically a 5-pin connector.
- Align the pins of the display's cable connector with the e-bike's harness connector.
- Gently push the connectors together until they click into place, ensuring a secure connection.
- Route the cable neatly along the handlebar and frame, securing it with cable ties if necessary, to prevent snagging or damage.
Video 1: Demonstration of the ANANDA D13 display and its 5-pin connector.
Figure 2: Detail of the 5-pin connector
3. Иштөө нускамалары
The ANANDA D13 display features three buttons for control: '+', '⚡/M', and '-'.
Figure 3: D13 Display Buttons
3.1 Күйгүзүү/өчүрүү
- To power on the display and your e-bike system, press and hold the '⚡/M' button for a few seconds.
- To power off, press and hold the '⚡/M' button again until the display turns off.
3.2 Adjusting Assist Levels
- Use the '+' button to increase the pedal assist level.
- Use the '-' button to decrease the pedal assist level.
3.3 Changing Display Modes
- Press the '⚡/M' button briefly to cycle through different display modes (e.g., speed, distance, battery level, trip time).
3.4 Автоматтык функциялар
- The display supports automatic sleep and auto-pause functions to conserve battery life. These features activate after a period of inactivity.
4. Техникалык тейлөө
- **Cleaning:** Wipe the display screen and body with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- **Storage:** When not in use for extended periods, store the display in a dry place within the specified storage temperature range (-30℃ to 70℃).
- **Connection Check:** Periodically check that all connections are secure and free from corrosion or damage.
5. Кыйынчылыктарды
- **Display Not Turning On:**
- Электр велосипединин аккумулятору заряддалганын жана туура туташтырылганын текшериңиз.
- Check all cable connections, especially the 5-pin connector to the display, for looseness or damage.
- If the issue persists, contact your seller for further assistance.
- **Incorrect Readings:**
- Verify that the display is securely mounted and not vibrating excessively.
- If speed or distance readings are inaccurate, consult your e-bike's main controller manual or seller for calibration procedures.
- **Water Ingress:** The display has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged exposure to heavy rain or submersion. If water ingress occurs, disconnect power immediately and allow the unit to dry completely before attempting to use it again.
6. Техникалык шарттар
4-сүрөт: Артка view монтаждоо кронштейн менен
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | D13 |
| Электр камсыздоо | 24V/36V/48V |
| Жумушчу токту баалады | 10мА |
| Максималдуу жумушчу ток | 30мА |
| Штаттан тышкары агып чыгуу агымы | <1μA |
| Иштөө температурасы | -20℃ ~ 60℃ |
| Сактоо температурасы | -30℃ ~ 70℃ |
| Суу өткөрбөйт деңгээл | IPX7 |
| Автоматтык уйку | Ооба |
| Авто тыныгуу | Ооба |
| Сенсордук экран | Жок |
| Навигация | Жок |
7. Колдонуучунун кеңештери
- **Speed Limit:** The display may be configured with a maximum speed lock, commonly set to 25 km/h, depending on regional regulations and e-bike settings.
- **Customization:** As a customized product, specific functionalities or settings might vary. Always refer to any additional documentation provided by your e-bike manufacturer or seller for detailed customization options.
8. Кепилдик жана колдоо
For any questions, problems, or support needs regarding your ANANDA D13 LCD Remote Kit Display, please contact your seller directly. They are best equipped to provide assistance tailored to your specific product and e-bike configuration.
The product typically includes a free return policy within 90 days of receipt. Please consult the seller's return policy for specific terms and conditions.
