Poseidon HM144 Wireless Tattoo Machine User Manual

1. Киришүү

Thank you for choosing the Poseidon HM144 Wireless Tattoo Machine. This advanced electric tattoo pen is designed for professional tattoo artists, offering high efficiency, lower noise, and precise control with its powerful custom motor and integrated power supply. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your device.

2. Коопсуздук маалыматы

• This device is intended for professional use only.
• Always ensure proper sterilization and hygiene practices are followed before and after each use.
• Эгерде машина бузулган же иштебей турган болсо, аны иштетпеңиз.
• Keep the device away from water and other liquids to prevent electric shock.
• Use only the provided charging cable and power adapter to charge the device.
• Avoid dropping or subjecting the machine to strong impacts.
• Машинаны колдонбогондо салкын, кургак жерде сактаңыз.

3. Пакеттин мазмуну

The Poseidon HM144 Wireless Tattoo Machine package typically includes:

• 1 x Poseidon HM144 Wireless Tattoo Pen with Integrated Power Supply
• 1 x Type-C заряддоо кабели
• Колдонуучунун Колдонмосу (бул документ)

4. Device Components and Display Overview

The Poseidon HM144 features an intuitive design with an integrated display and control buttons.

Дисплей көрсөткүчтөрү:

• Батарея кубаттоо деңгээли: Калган батареянын кубаттуулугун көрсөтөт.
• Forced Start Mode: Activates a temporary power boost for starting.
• Multiple Gears (M1, M2, M3): Different operational modes or presets.
• Dot Poking: Specific mode for dot work.
• Тtage (V): Current operating voltage.
• Колдонуу убактысы: Displays the duration of current operation.

Башкаруу баскычтары:

• '+' баскычы: көлөмүн көбөйтөтtage or navigates menu options.
• '-' баскычы: Decreases voltage or navigates menu options.
• Power Button (G): Turns the device on/off, and may pause/resume operation.
• 'M' баскычы: Cycles through operational modes (M1, M2, M3) or other settings.

5. Орнотуу

5.1 Аппаратты заряддоо

Before initial use, fully charge the tattoo machine.

1. Locate the Type-C charging port on the integrated power supply.
2. Connect the provided Type-C charging cable to the device and a suitable USB power adapter (not included).
3. The battery indicator on the display will show charging status. A full charge typically takes 2-3 hours.

5.2 Attaching a Needle Cartridge

1. Машинанын өчүрүлгөнүн текшериңиз.
2. Carefully insert a sterile needle cartridge into the front end of the tattoo pen. Twist gently until it locks into place.
3. Ensure the needle is securely seated and aligned.

5.3 Соккунун узундугун тууралоо

The HM144 offers multiple stroke length adjustments for versatile use.

1. Rotate the grip section of the tattoo pen to adjust the stroke length.
2. The available stroke lengths are 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, and 4.2mm.
3. Select the appropriate stroke length based on your tattooing technique and desired outcome.

6. Операция

6.1 Күйгүзүү/өчүрүү

• Press and hold the Power button (G) for a few seconds to turn the machine ON or OFF.
• A short press of the Power button (G) during operation will pause or resume the machine.

6.2 Adjusting Voltage

• Use the '+' and '-' buttons to increase or decrease the operating voltage.
• Томду байкаңызtage reading on the display to set your desired working voltage.

6.3 Mode Selection (M1, M2, M3)

• Press the 'M' button to cycle through different operational modes (M1, M2, M3). These modes may offer preset voltage ranges or specific performance characteristics.

6.4 Forced Start Mode

• The Forced Start Mode provides a brief power surge to help start larger needle configurations or when the machine needs an initial boost. Refer to the display for its activation status.

6.5 Dot Poking Function

• The Dot Poking function is designed for specific dot work techniques, offering optimized performance for this style. Activate it via the 'M' button or a dedicated setting if available.

7. Техникалык тейлөө

• Тазалоо: After each use, wipe down the exterior of the machine with a suitable disinfectant wipe. Do not immerse the machine in liquids.
• Стерилдөө: Ensure all parts that come into contact with skin or ink (e.g., needle cartridges) are single-use and disposed of properly, or sterilized according to professional standards. The machine itself is not designed for autoclave sterilization.
• Майлоо: Periodically apply a small amount of machine oil (specifically designed for tattoo equipment) to moving parts as recommended by the manufacturer to ensure smooth operation.
• Сактагыч: Store the machine in its original packaging or a protective case in a clean, dry environment, away from direct sunlight and extreme temperatures.
• Батареяга кам көрүү: Батареянын иштөө мөөнөтүн узартуу үчүн, бат-баттан батарейканы толук зарядсыздандырбаңыз. Аппаратты узак убакыт бою колдонбосо дагы, үзгүлтүксүз заряддаңыз.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Колдонуучунун кеңештери

• Батарея башкаруу: The integrated 2300mAh battery provides 5-8 hours of working time. For continuous work, ensure the device is fully charged before starting. Consider taking short breaks during long sessions to allow the machine to cool and conserve battery.
• Stroke Versatility: Experiment with the various stroke lengths (2.4mm to 4.2mm) to find the optimal setting for different tattoo styles, from fine lines to shading and color packing.
• Кубат режимдери: Utilize the M1, M2, M3 modes and the 'Forced Start' function to adapt to different needle types and skin conditions, enhancing efficiency and precision.

11. Кепилдик жана колдоо

For warranty information, technical support, or any inquiries regarding your Poseidon HM144 Wireless Tattoo Machine, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.