1. Киришүү
The ThinkRider VS200 is a cutting-edge virtual shifter designed to enhance your indoor cycling experience with ThinkRider smart trainers. This system, comprising the VS200 BLE Controller and a Virtual Cassette, allows for seamless and quiet virtual gear changes, eliminating the need for physical derailleur adjustments during your training sessions. It is compatible with ThinkRider X2, X2Max, and XXPRO bike trainers.
2. Продукт тизмеси
Пакет төмөнкү компоненттерди камтыйт:
- 1 x VS200 BLE Controller
- 1 x Virtual Cassette (or Virtual Flywheel)
- 3 x Straps (S/M/L) for secure mounting
3. Орнотуу нускамалары
3.1 Virtual Cassette Installation
To install the virtual cassette:
- Gently pull apart the two halves of the virtual cassette to open it.
- Position the virtual cassette onto your bike trainer's freehub body.
- Ensure the chain is properly aligned with the virtual cassette.
- Close the virtual cassette halves securely.
3.2 VS200 Controller Mounting
Mount the VS200 controller to your bike's handlebars or brake levers using the provided straps:
- Select the appropriate strap size (S, M, or L) for a snug fit.
- Position the VS200 controller on your desired location (e.g., brake lever hood).
- Secure the controller firmly with the strap.
3.3 Initial Configuration with ThinkRiderTools App
Before first use, configure the VS200 controller using the ThinkRiderTools app:
- Download and install the "ThinkRiderTools" app on your smartphone.
- Open the app and ensure Bluetooth is enabled on your device.
- Follow the in-app instructions to connect and configure the VS200 controller with your smart trainer (X2, X2Max, or XXPRO).
- Once configured, the controller can connect directly to the smart trainer without needing the app for every ride.
4. Иштөө нускамалары
4.1 Virtual Shifting
The VS200 controller allows for simulated gear shifting:
- тийиңиз [+] key to simulate an upshift (increase resistance).
- тийиңиз [-] key to simulate a downshift (reduce resistance).
- Each click is accompanied by a blue indicator light for visual confirmation.
4.2 Smart Standby and Wake-up
The VS200 features smart standby for power efficiency:
- No physical power switch is needed.
- The trainer automatically enters sleep mode after 30 minutes of inactivity (no power output).
- Simply press any button on the VS200 controller to wake it up for intuitive and hassle-free operation.
4.3 Intelligent Adaptation and Optimal Performance
For optimal performance and seamless gear shifting:
- Install the chain on the large chainring and middle cog of your physical cassette (if using one) to ensure the chainline is straight.
- The system offers 60-level resistance adjustment with different gear ranges:
- 5% low gear: Suitable for hill climbing and long-distance cycling.
- 8% mid-range gear: Suitable for daily training to replicate real-road scenarios.
- 12% high-range gear: Suitable for high-intensity training and sprints.
- Маанилүү эскертүү: Virtual shifting is temporarily disabled in ERG mode.
5. Техникалык тейлөө
5.1 Charging the VS200 Controller
The VS200 controller features a long-lasting battery and Type-C fast charging:
- Use a Type-C cable to charge the device.
- Толук кубаттоо болжол менен 2 саатты талап кылат.
- The battery life is rated for 400 hours of operation, allowing for semi-annual charging under typical use.
5.2 Жалпы кам көрүү
- Түзмөктү таза жана кургак кармаңыз. Жумшак, кургак чүпүрөк менен сүртүңүз.amp зарыл болсо, кездеме.
- Аппаратты экстремалдык температурага же түз күн нуруна узак убакытка калтыруудан сактаңыз.
- Аппаратты колдонбогондо салкын, кургак жерде сактаңыз.
6. Кыйынчылыктарды
- Device not connecting to trainer:
- Ensure the VS200 controller is charged.
- Verify Bluetooth is enabled on your smartphone/device.
- Confirm initial configuration was completed via the ThinkRiderTools app.
- Ensure the trainer is awake (press a button on the VS200).
- Shifting not working:
- Check if the blue indicator light illuminates when pressing [+] or [-].
- Ensure you are not in ERG mode, as virtual shifting is disabled in this mode.
- Verify the controller is properly paired with your trainer.
- Шайкештик маселелери:
- The VS200 is compatible with ThinkRider X2, X2Max, and XXPRO trainers. It is not compatible with X7 Pro or other non-listed models.
- The virtual cassette is compatible with 10, 11, and 12-speed chains.
- Колдонмо шайкештиги:
- The VS200 primarily communicates with the ThinkRider smart trainer. The trainer then communicates with third-party cycling applications like Zwift or MyWhoosh. Ensure your trainer is properly connected to these applications.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Өлчөмү | 25*39*10мм |
| Салмагы | ≈8г |
| Батарея сыйымдуулугу | 90mAh |
| Батареянын иштөө мөөнөтү | 400ч |
| Байланыш | Bluetooth 5.0 |
| Power Input | DC 5V 90mA |
| Шайкеш модель | X2, X2MAX, XXPRO |
| Иштөө температурасы | 0-45°C |
| Сактоо температурасы | -10-60°С |
8. Колдонуучунун кеңештери
- For optimal performance, ensure your bike's chain is on the large chainring and middle cog when using the virtual cassette to maintain a straight chainline.
- The virtual cassette is compatible with 10, 11, and 12-speed chains, offering broad compatibility for various setups.
- While the ThinkRiderTools app is essential for initial setup, the controller can operate independently afterward, connecting directly to your smart trainer.
- The VS200 is very lightweight (approx. 8g), making it unobtrusive during rides.
9. Кепилдик жана колдоо
Кепилдик маалыматы, техникалык колдоо же тейлөө боюнча суроолор үчүн расмий ThinkRider сайтына кайрылыңыз webсайтка же кардарларды тейлөөгө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
