Колдонмолор+

Thermalright TL-M12QRW X2

Thermalright TL-M12QRW X2 120mm Computer Case Fan Instruction Manual

Model: TL-M12QRW X2 Series

Бренд: Thermalright

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright TL-M12QRW X2 120mm Computer Case Fan. This fan series features advanced ARGB lighting, PWM speed control, and an innovative daisy-chain design for simplified cable management. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your product.

Thermalright TL-M12QRW X2 fan with ARGB and PWM connectors, showing size and model.

Figure 1: Thermalright TL-M12QRW X2 Fan Overview

2. Продукциянын варианттары

The Thermalright TL-M12QRW X2 series offers several variants, primarily differing in blade design (reverse or standard airflow) and quantity (X2 for two fans, X3 for three fans). Please identify your specific model for correct installation and usage.

  • M12QR X2 (Reverse Blade Fan): Black, 2-pack.
  • M12QRW X2 (Reverse Blade Fan): White, 2-pack.
  • M12Q X2 (Standard Blade Fan): Black, 2-pack.
  • M12QW X2 (Standard Blade Fan): White, 2-pack.
  • M12QR X3 (Reverse Blade Fan): Black, 3-pack.
  • M12QRW X3 (Reverse Blade Fan): White, 3-pack.
  • M12Q X3 (Standard Blade Fan): Black, 3-pack.
  • M12QW X3 (Standard Blade Fan): White, 3-pack.
Thermalright TL-M12QR X2 (reverse airflow version) with two fans.

Figure 2: TL-M12QR X2 (Reverse Airflow Version)

3. Техникалык шарттар

Below are the technical specifications for the Thermalright TL-M12QRW X2 series fans:

Атрибут Нарк
Модель номери TL-M12QRW X2 (Series)
Fan Size 120mm (L 124 * W 120 * H 25mm)
Fan Speed 0 - 1500 RPM ±10% (MAX)
Ызы-чуу деңгээли ≤23.2 дБА
Аба көлөмү 47.6 CFM
Аба басымы 1.31 mm H₂O (MAX)
Power Interface 4-PIN PWM
Working Voltage DC 12V
Иштөө агымы 0.15A
Жарыктандыруу интерфейси +5V 3-PIN ARGB
Подшипник түрү Fluid Dynamic Bearing (S-FDB)
Күйөрмандардын жашоосу 100,000 саат
Blade саны 7
үчүн колдонулат Корпус, Радиатор
Сертификация CE, RoHS

Note: The above parameter data comes from Thermalright's laboratory for reference only.

Table of fan parameters including size, speed, noise, air volume, air pressure, interfaces, voltage, current, bearing type, and warranty.

Figure 3: Detailed Fan Parameters

4. Өзгөчөлүктөрү

  • Infinity Mirror ARGB Lighting: Experience stunning, layered lighting effects with a meticulously designed infinity frame structure. A slender, fractured-style LED light strip runs along the inner edges of the fan frame, positioned between the fan blades.
  • Reverse Blade Design (Specific Models): M12QR models feature blades that rotate counter-clockwise, with the fan blade surface facing the air outlet, optimized for rear exhaust configurations.
  • Wireless Patchwork Magic Interface: Simplifies installation by allowing fans to transmit signals and power between each other via direct contacts, reducing cable clutter.
  • PWM башкаруу: 4-PIN PWM interface allows for precise fan speed control (0-1500 RPM) to balance cooling performance and noise levels.
  • Тынч иштөө: Engineered for low noise output, with a maximum noise level of ≤23.2 dBA.
  • S-FDB Magnetic Stability Bearing: Utilizes high-precision Fluid Dynamic Bearings with a sealed design for long-lasting durability, maintenance-free operation, and reduced fan blade vibration.
  • Туруктуу курулуш: Made from UL-class safety insulation level industrial-grade PBT+PC material for enhanced strength and safety.
  • Шокту абсорбциялоо: Double-sided four-corner silicone corner pads provide effective shock absorption, minimizing vibration and noise.
Close-up of the infinity mirror ARGB lighting effect.

Figure 4: Infinity Mirror Lighting Effect

Wireless patchwork magic interface showing fan interlocking mechanism.

Figure 5: Wireless Patchwork Interconnection

Reversed fan blade design with airflow arrows indicating wind signal and incoming wind.

Figure 6: Reversed Fan Blade Airflow

5. Орнотуу жана орнотуу

Follow these steps to install your Thermalright TL-M12QRW X2 series fans:

  1. Prepare Your System: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the fan mounting locations.
  2. Фантарды орнотуу:
    • Position the fan(s) in your desired location (e.g., case fan mounts, radiator).
    • Secure the fan(s) using the provided screws. The double-sided silicone corner pads will help absorb vibrations.
  3. Connecting Multiple Fans (Daisy Chain):
    • For multiple fans, utilize the wireless patchwork magic interface. Align the connectors on the side of each fan and gently push them together until they click into place. This transmits both power and ARGB signals between fans.
    • Image showing the wireless patchwork connector on the fan.

      Figure 7: Wireless Patchwork Connector

  4. Зымдарды туташтыруу:
    • PWM Fan Power Supply Interface (4-PIN): Connect the 4-PIN PWM cable from the fan (or the last fan in a daisy chain) to an available 4-PIN fan header on your motherboard. This allows for fan speed control.
    • ARGB Fan Light Interface (+5V 3-PIN): Connect the +5V 3-PIN ARGB cable from the fan (or the last fan in a daisy chain) to a compatible +5V 3-PIN ARGB header on your motherboard. This enables ARGB lighting control and synchronization.

      Маанилүү эскертүү: The wire of the control line needs to be connected to the side with pins of the fan. Please pay attention to connect in series or directly insert into the corresponding ARGB lighting effect interface of the motherboard. The two modes (PWM and ARGB) cannot be used together on the same header if they are separate. For motherboard ARGB synchronization, a single motherboard interface typically has an upper limit, often supporting no more than 6 devices. Refer to your motherboard's manual for specific ARGB header limitations.

Wiring diagram showing PWM fan power supply interface and ARGB fan light interface.

Figure 8: PWM and ARGB Wiring Diagram

After all connections are made, close your computer case and power on your system.

6. Операция

  • Желдетүүчү ылдамдыкты көзөмөлдөө (PWM): The fan speed can be controlled via your motherboard's BIOS/UEFI settings or through compatible software provided by your motherboard manufacturer. Ensure the 4-PIN PWM cable is correctly connected to a PWM-enabled fan header.
  • ARGB жарыкты башкаруу: The ARGB lighting effects can be controlled using your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). Ensure the +5V 3-PIN ARGB cable is correctly connected to a compatible ARGB header.

7. Техникалык тейлөө

  • Тазалоо: Periodically clean the fan blades and frame to remove dust buildup. Use a soft brush or compressed air. Ensure the fan is powered off before cleaning.
  • Майлоо: The S-FDB bearing is designed for maintenance-free operation and does not require lubrication.
  • Бөлүп салуу эскертүүсү: Do not attempt to disassemble the fan. Self-disassembly may void the product warranty.
Close-up of the S-FDB magnetic stability bearing with a warm reminder not to disassemble.

Figure 9: S-FDB Bearing and Disassembly Warning

8. Кыйынчылыктарды

  • Желдетпейт:
    • Check if the 4-PIN PWM cable is securely connected to the motherboard fan header.
    • Вентилятор аталышы энелик платаңыздын BIOS/UEFI жөндөөлөрүндө иштетилгенин текшериңиз.
    • Verify that your power supply is providing adequate power.
  • ARGB Lighting Not Working/Incorrect Colors:
    • Confirm the +5V 3-PIN ARGB cable is correctly connected to a compatible +5V 3-PIN ARGB header on your motherboard (not a 12V 4-PIN RGB header).
    • Check your motherboard's ARGB software for correct settings and effects.
    • If daisy-chaining, ensure all connections between fans are secure and the main ARGB cable is connected to the motherboard.
    • Remember the motherboard ARGB header limit (typically max 6 devices).
  • Ашыкча ызы-чуу/титирөө:
    • Желдеткич бекем орнотулганын жана бурамалардын бекем тартылганын текшериңиз.
    • Желдетүүчү пластинкаларга тийген кабелдер же тоскоолдуктар жок экенин текшериңиз.
    • The silicone corner pads are designed to reduce vibration; ensure they are properly seated.
    • The S-FDB bearing is designed to minimize vibration. If noise persists, contact support.

9. Колдонуучунун кеңештери

  • Кабель башкаруу: Алдын алаtage of the wireless patchwork design to minimize cable clutter within your PC case. Plan your fan layout to utilize this feature effectively.
  • Аба агымынын багыты: Pay attention to the airflow direction, especially if using reverse blade fans. Reverse blade fans are ideal for intake on radiators or specific case positions where you want the aesthetic side facing outwards while still pulling air in. Standard fans typically push air out from the aesthetic side.
  • ARGB Customization: Experiment with your motherboard's ARGB software to create unique lighting patterns and synchronize them with other components for a cohesive look.

10. Кепилдик жана колдоо

Thermalright provides the following warranty and support for this product:

  • Кепилдик мөөнөтү: 3-Year Warranty from the date of purchase.
  • Кепилдик чөйрөсү: Covers manufacturing defects and non-human damage. Damage caused by improper installation, misuse, unauthorized modification, or disassembly is not covered.
  • Байланыш маалыматы:
    • WhatsApp: +44 7842 512902
    • Email: thermalright.united.states.store@gmail.com
Warranty Policy table showing 3-year warranty, non-human damage scope, and contact information.

Figure 10: Thermalright Warranty Policy