JINGSHA H81M-I ITX Motherboard Kit User Manual

1. Киришүү

This user manual provides detailed instructions for the installation, configuration, and maintenance of your JINGSHA H81M-I ITX Motherboard Kit. This kit is designed for compact PC builds and includes an H81M-I motherboard, an Intel Core i3 4150 processor, and 8GB of DDR3 1600MHz PC RAM. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

2. Продукттун спецификациялары

The following table details the specifications for the JINGSHA H81M-I ITX Motherboard and included components:

Included CPU Specifications (Intel Core i3 4150):

• Processor Series: Core i3 4150 (2 cores / 4 threads)
• Base frequency: 3.50GHz
• Socket type: LGA 1150
• Cache: 3 MB
• Memory Types: DDR3-1333/1600, DDR3L-1333/1600
• Technology: 22nm
• TDP: 54 Вт
• Processor Graphics: Intel HD Graphics 4400

Included Memory Specifications:

• Type: DDR3 PC Memory
• Frequency: DDR3 1600MHz
• Жөндөмдүүлүгү: 8GB

3. Орнотуу жана орнотуу

Before beginning installation, ensure your workspace is clean and static-free. It is recommended to wear an anti-static wrist strap. Refer to the motherboard layout diagram for component locations.

3.1 CPU орнотуу (LGA 1150)

1. LGA 1150 CPU розеткасын энелик платадан табыңыз.
2. Процессордун кармоочу алкагын ачуу үчүн жүктөө рычагын акырын басып, аны розеткадан тартыңыз.
3. Carefully align the Intel Core i3 4150 CPU with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Do not force the CPU into place.
4. CPUну розеткага түшүрүңүз.
5. Кармап турган алкакты жаап, жүктөө рычагын кайра кулпуланган абалына түртүңүз.
6. Процессордун үстү жагына жука, тегиз термикалык пастаны сүйкөңүз.
7. Install the CPU cooler (not included in this kit) according to its manufacturer's instructions, ensuring it is securely fastened and making good contact with the CPU. Connect the CPU fan cable to the "3PIN CPU FAN header" on the motherboard.

3.2 Эстутум (RAM) орнотуу

1. Locate the two DDR3 memory slots ("2*DDR3 slot") on the motherboard.
2. Эстутум уячасынын эки учундагы кармоочу клиптерди ачыңыз.
3. Align the 8GB DDR3 RAM module with the slot, ensuring the notch on the module matches the key in the slot.
4. Кармоочу клиптер ордуна орнотулганга чейин RAM модулунун эки учун бекем басыңыз.
5. If installing a second RAM module (up to 16GB total), repeat the process for the other DDR3 slot.

3.3 Сактагыч түзүлүштү орнотуу

3.3.1 M.2 SSD орнотуу

1. Locate the "1*M.2 NVME_NGFF" port on the motherboard.
2. Insert your M.2 SSD into the slot at a slight angle.
3. Gently push down the SSD and secure it with the provided screw (not included with motherboard).

3.3.2 SATA дискин орнотуу

1. Connect your SATA storage devices (HDD/SSD) to the "2*SATA3.0" or "1*SATA2.0" ports using SATA data cables.
2. Connect the SATA power cables from your power supply unit (PSU) to the SATA devices.

3.4 Кубат туташтыруу

1. Connect the 24-pin ATX power connector from your PSU to the "24pin ATX connector" on the motherboard.
2. Connect the 8-pin 12V CPU power connector from your PSU to the "8PIN 12V connector" near the CPU socket.

3.5 Алдыңкы панель жана перифериялык байланыштар

Бул колонкалардын так жайгашкан жери үчүн энелик платанын жайгашуу схемасын караңыз (3-сүрөт).

• Алдыңкы панелдин аталыштары: Connect the power switch (PWR SW), reset switch (RST SW), HDD LED, and Power LED (PWR LED) cables from your PC case to the "Front control panel header". Ensure correct polarity for LEDs.
• USB Headers: Connect your case's front USB 3.0 ports to the "F_USB3.0 header" and USB 2.0 ports to the "F_USB2.0 header".
• Аудио баш: Connect your case's front audio panel to the "F_Audio Header".
• Системалык желдеткич: Connect additional case fans to the "3PIN SYS FAN header".

3.6 Арткы I/O панелинин туташуулары

Connect your peripherals to the appropriate ports on the rear I/O panel.

• USB порттору: Connect keyboards, mice, and other USB devices to the available USB 2.0 ports.
• Video Outputs: Connect your monitor(s) to the HD (HDMI) or VGA ports.
• LAN порт: Connect an Ethernet cable for network access to the 1000Mbps Gigabit Ethernet port.
• Аудио уячалары: Connect speakers, headphones, or microphones to the 3-in-1 audio jacks.

4. Иштөө нускамалары

Бардык компоненттер орнотулуп, туташтырылгандан кийин, сиз тутумуңузду иштете аласыз.

4.1 Биринчи жүктөө

1. Ensure all power cables are securely connected to the wall outlet and PSU.
2. Компьютериңиздин корпусундагы кубат баскычын басыңыз.
3. Система күйгүзүлүшү керек жана сиз дисплейдин чыгышын көрүшүңүз керек. Болбосо, Көйгөйлөрдү чечүү бөлүмүн караңыз.
4. Access the BIOS/UEFI setup by pressing the designated key (usually DEL or F2) during startup to configure boot order, system time, and other settings.
5. Install your preferred operating system from a bootable USB drive or optical media.

4.2 Дисплейдин конфигурациясы

The motherboard supports both HD (HDMI) and VGA outputs, allowing for dual-monitor setups. The Intel Core i3 4150 CPU includes integrated Intel HD Graphics 4400.

• Connect your primary monitor to either the HD or VGA port.
• For a second monitor, connect it to the remaining video output.
• Once the operating system is installed, you can configure display settings (resolution, extended desktop, etc.) within the OS.

4.3 Тармакка туташуу

The integrated RTL8111H Gigabit Ethernet controller provides high-speed wired network access.

• Connect an Ethernet cable from your router/modem to the RJ45 LAN port on the rear I/O panel.
• Ensure network drivers are installed (usually automatically by modern operating systems or available from the manufacturer's webсайт).

5. Техникалык тейлөө

Regular maintenance helps ensure the longevity and stable performance of your PC components.

5.1 Чаңды башкаруу

• Periodically clean the inside of your PC case using compressed air to remove dust buildup from fans, heatsinks, and components. Dust can impede airflow and lead to overheating.
• Ensure proper airflow within your case by managing cables and ensuring fans are unobstructed.

5.2 BIOS жаңыртуулары

• The motherboard uses an AMI EFI BIOS. Check the JINGSHA support website for any available BIOS updates.
• Only update the BIOS if necessary (e.g., for new CPU support, stability improvements, or specific bug fixes) and follow the instructions carefully to avoid damaging the motherboard.

5.3 Component Check

• Occasionally check that all cables (power, SATA, front panel) are securely connected.
• Ensure the CPU cooler is firmly seated.

6. Кыйынчылыктарды

Эгер көйгөйлөргө туш болсоңуз, көйгөйлөрдү чечүүнүн төмөнкү кадамдарын жасап көрүңүз:

• Күч жок:
  • Check all power connections: 24-pin ATX, 8-pin 12V CPU, and power supply to wall outlet.
  • Кубат менен камсыздоонун которгучу 'ON' абалында экенин текшериңиз.
  • Алдыңкы панелдеги кубат которгучунун кабели энелик платага туура туташкандыгын текшериңиз.
• Дисплей чыгаруу жок:
  • Ensure the monitor is connected to the correct video output (HD or VGA) on the motherboard.
  • Check that the monitor is powered on and set to the correct input source.
  • RAM модулдарын кайра орнотуңуз. RAM туура эмес орнотулгандыктан, дисплейдин жоктугу кеңири таралган.
  • If using a dedicated graphics card (in the PCIe x16 slot), ensure the monitor is connected to the graphics card, not the motherboard's integrated ports.
• Системанын туруксуздугу/бузуулар:
  • Check CPU and system temperatures. Overheating can cause instability.
  • RAM модулдарынын туура орнотулганын текшериңиз.
  • RAM бузулганын текшерүү үчүн эстутум диагностикалык куралдарын иштетиңиз.
  • Verify all drivers (chipset, graphics, network) are up to date.
• Storage Device Not Detected:
  • Check SATA data and power cable connections for SATA drives.
  • For M.2 SSDs, ensure it is correctly seated and secured.
  • Check BIOS settings to ensure SATA ports are enabled and M.2 mode (NVMe/SATA) is correctly configured if applicable.
• Debug Header: The motherboard includes a "Debug Header". While specific codes are not provided, this header is typically used for diagnostic POST (Power-On Self-Test) codes, which can help identify issues during startup. Consult advanced troubleshooting guides or JINGSHA support for interpreting these codes if available.

7. Колдонуучунун кеңештери

• Батареяны алып салуу: Please note that the CMOS battery (CR2032) on the motherboard may be removed before shipping due to international shipping regulations. You will need to install a new CR2032 battery upon receiving the motherboard to retain BIOS settings and system time.
• Драйверди орнотуу: After installing your operating system, ensure you install the latest chipset, graphics (for Intel HD Graphics 4400), and LAN drivers for optimal performance and stability. These can usually be found on the JINGSHA support webсайт же Intel webсайт.
• Компоненттин шайкештиги: While this kit provides a tested combination, if you plan to upgrade components (e.g., CPU, RAM, M.2 SSD), always verify compatibility with the H81 chipset and LGA 1150 socket.
• Электр камсыздоо: Ensure your power supply unit (PSU) has sufficient wattage and the necessary 8-pin 12V CPU and 24-pin ATX connectors for stable operation.

8. Кепилдик жана колдоо

The Intel Core i3 4150 CPU included in this kit comes with a 1-year warranty from the date of purchase. For any issues related to the motherboard or other components, please contact the seller or JINGSHA customer support for assistance. Keep your proof of purchase for warranty claims.

JINGSHA and SZMZ are sub-brands of the same company.