JEYI M.2 Heatsink (icold-007) Instruction Manual

1. Киришүү

The JEYI icold-007 M.2 Heatsink is designed to provide efficient passive cooling for M.2 2280 SSDs, preventing thermal throttling and maintaining optimal performance. Its ultra-thin 6mm design makes it ideal for installations in tight spaces, such as ITX cases and PlayStation 5 consoles. Constructed from military-grade aluminum alloy with an AirFlow stripe design, this heatsink effectively dissipates heat, reducing SSD temperatures by 10-30°C.

Figure 1: JEYI M.2 Heatsink 2-Pack, highlighting its 6mm ultra-thin design.

2. Өзгөчөлүктөрү

• Мейкиндикти үнөмдөөчү дизайн: With an ultra-thin body of only 6mm (0.24 inches), it can be easily installed in compact environments like ITX cases and PS5 consoles.
• Өркүндөтүлгөн муздатуу технологиясы: Features an AirFlow stripe heatsink design with engineered cooling grooves that enhance heat dissipation, lowering SSD temperatures by 10-30°C.
• High Thermal Conductivity: Utilizes an aluminum base combined with silicone thermal pads, offering a thermal conductivity of 237 W/(m·K) for the heatsink and 8W/cm·K for the thermal pads, ensuring rapid heat transfer from the SSD.
• Жалпы шайкештик: Supports NVMe/NGFF M.2 2280 SSDs with M Key or B+M Key interfaces. Not compatible with MSATA SSDs.
• Оңой орнотуу: Designed for simple, tool-assisted installation with pre-installed thermal pads, allowing for quick setup.
• Мыкты туруктуулук: Made from aviation-grade aluminum alloy, providing a lightweight, corrosion-resistant, and robust cooling solution.

Figure 2: The JEYI M.2 SSD Ultra-Thin Cooler, showcasing its aircraft-grade Al-Mg alloy and CNC-milled fin array.

Figure 3: Visual representation of the 6mm (0.24 inch) ultra-slim profile, ideal for tight spaces.

Figure 4: Illustration of the Stripe Cooling Technology, engineered to lower temperatures by 10-30°C.

5-сүрөт: жарылган view demonstrating the military-grade aluminum alloy construction and hollowed-out design.

Figure 6: Graphic highlighting the 237 W/(m·K) thermal conductivity of the heatsink material.

3. Техникалык шарттар

Note: The thickness data of this product does not include the thickness of the hard drive and thermal pad. Only compatible with 2280 length SSD.

Figure 7: Detailed dimensions of the heatsink and thermal pads.

Figure 8: Official product parameter table.

4. Пакеттин мазмуну

The JEYI icold-007 M.2 Heatsink package includes the following items:

• 1 x M.2 SSD Heatsink (2-pack if ordered as such)
• 2 x Silicone Thermal Pads
• 1 x Screwdriver
• 4 x Монтаждоо бурамалар

Figure 9: Diagram illustrating the components included in the package.

5. Орнотуу жана орнотуу

Follow these steps to install the JEYI icold-007 M.2 Heatsink onto your M.2 2280 SSD:

1. SSDди даярдаңыз: Ensure your M.2 2280 SSD is clean and free of dust or debris.
2. Термикалык жаздыкчаны колдонуу: Carefully peel off the protective film from one side of the silicone thermal pad and stick it onto the top surface of your M.2 SSD. Ensure it covers the main chips.
3. Position SSD in Heatsink: Place the SSD (with the thermal pad attached) into the heatsink. Align the screw holes on the heatsink with those on the SSD.
4. Secure Heatsink: Use the provided screwdriver and four screws to secure the heatsink around the SSD. Do not overtighten the screws.
5. Install into Slot: Insert the assembled SSD and heatsink into the M.2 slot on your motherboard or console (e.g., PS5). Ensure it is fully seated and secured according to your device's instructions.

10-сүрөт: жарылган view showing the heatsink, thermal pads, SSD, and aluminum base for assembly.

Figure 11: Compatibility diagram showing support for M Key and B+M Key M.2 2280 SSDs, and non-compatibility with MSATA.

Figure 12: Visual guide for the simple installation process.

6. Иштөө нускамалары

The JEYI icold-007 is a passive heatsink and requires no active operation. Once installed, it continuously dissipates heat from your M.2 SSD. For optimal performance, ensure adequate airflow within your PC case or console to allow the heatsink to effectively shed heat into the surrounding environment.

7. Техникалык тейлөө

• Тазалоо: Periodically inspect the heatsink for dust accumulation. Use compressed air or a soft brush to gently remove any dust from the fins to maintain optimal cooling performance.
• Thermal Pad Inspection: If you ever remove the heatsink, inspect the thermal pads. If they appear damaged, dried out, or lose their adhesive properties, they should be replaced to ensure efficient heat transfer.

8. Кыйынчылыктарды

• Heatsink Not Fitting: Double-check that your SSD is an M.2 2280 form factor. Ensure no other components on your motherboard or console are obstructing the heatsink. Verify that the thermal pads are correctly applied and not causing excessive thickness.
• SSD Overheating After Installation: Confirm that the thermal pads are making good contact with both the SSD chips and the heatsink. Ensure the heatsink is securely fastened with the screws. Check for adequate airflow within your system's chassis.
• SSD аныкталган жок: This heatsink is a passive component and does not affect SSD detection. If your SSD is not detected, re-check its seating in the M.2 slot and consult your motherboard/console manual for troubleshooting SSD detection issues.

9. Колдонуучунун кеңештери

This section would typically include helpful tips and insights gathered from user experiences and frequently asked questions. As no specific user feedback was provided, here are some general recommendations:

• For optimal cooling, ensure your PC case has good airflow, especially around the M.2 slot.
• When installing in a PS5, follow Sony's official guidelines for M.2 SSD installation to ensure proper fit and function.
• Do not apply excessive force when tightening screws to avoid damaging the SSD or heatsink.

10. Кепилдик жана колдоо

For specific warranty information, please refer to the product packaging or contact the seller directly. For additional technical details and support, you may consult the official user manual PDF available at: JEYI icold-007 User Manual (PDF).