Introduction
Thank you for choosing the RAVEMEN CL01 Pro Bike Rear Light. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new bicycle taillight. Please read it thoroughly before use to ensure optimal performance and safety.
Image: The RAVEMEN CL01 Pro Bike Rear Light with its mounting bracket.
Пакеттин мазмуну
Сураныч, бардык буюмдар бар экенин текшерүү үчүн пакетти текшериңиз:
- 1 x RAVEMEN CL01 Pro Bike Tail Light
- 1 x Strap Mount (ABM14)
- 1 x Saddle Rail Mount (ABM25)
- 1 х USB-C кубаттоо кабели
- 1 x User Manual
Image: All components included in the CL01 Pro package.
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | CL01 Pro |
| Type | Tail Light |
| Электр камсыздоо | Battery (200mAh/3.7V rechargeable Li-ion) |
| Дене материалы | Пластик |
| Монтаждоо | Seatpost |
| Суу өткөрбөйт деңгээл | IPX6 |
| Акылдуу сезүү | Ооба |
| Dimmer колдоо | 5 - 8 Files |
| LED | High-efficiency red LEDs |
| Өлчөмдөрү (жарык бирдиги) | 55мм (L) x 30mm (W) x 14mm (H) |
| Салмагы (жеңил бирдиги) | 22г |
| Сертификация | CE, FCC, RoHS |
Image: Diagram showing the dimensions of the CL01 Pro light unit (5.6cm L x 2.8cm W x 1cm H, 22g).
Image: Table detailing light modes (High, Low, Warning flashing, Rapid flashing, Slow flashing) with corresponding brightness (lumens), run time (hours), impact resistance (1 meter), and water resistance (IPX6).
Жайгашуу
Монтаждоо параметрлери
The CL01 Pro offers versatile mounting options for different bicycle setups.
Option 1: Seatpost Installation (using ABM14 Strap Mount)
- Strap the ABM14 mount onto the seatpost.
- Slide the CL01 Pro into the slot until it clicks securely into place.
Option 2: Saddle Rail Installation (using ABM25 Mount)
- First, install the tail light connector properly, then tighten the screws.
- Mount the ABM25 on the seat rail, adjust it to the desired position, and then tighten the screws.
- Slide the CL01 Pro onto the rail mount until it locks into position.
Орнотуу боюнча визуалдык колдонмо үчүн төмөнкү видеону караңыз:
Video: Demonstrates the installation process for both seatpost and saddle rail mounts, along with basic operation.
Иштөө нускамалары
Күйгүзүү/өчүрүү
- To turn on/off the power, press the power button for 1.5 seconds.
Mode Cycling
- Once powered on, click the power button to cycle through the available lighting modes (High, Low, Warning flashing, Rapid flashing, Slow flashing).
Батарея көрсөткүчү
A quick press of the power button when the light is off will show the battery status:
- Green light: Battery > 40%
- Red light: Battery 5-40%
- Blinking Red light: Battery < 5% (Low battery)
Auto On-off and Brake Detection Mode
This mode enhances safety and conserves battery by intelligently managing the light's operation.
- Жандандыруу: To activate this mode, press the power button for 3 seconds until the light blinks quickly 5 times.
- Auto On-off: The tail light will automatically turn off after 2 minutes of inactivity and power on again upon detecting motion.
- Тормозду аныктоо: The light automatically increases brightness for 2 seconds when braking to alert traffic behind you.
- Өчүрүү: To exit this mode, turn off the light and press the power button for 3 seconds until the light blinks slowly 3 times.
Заряддоо
The CL01 Pro features a concealed USB-C charging port for convenience and protection.
- Locate the concealed USB-C port on the device.
- Plug the provided USB-C cable into the port and connect the other end to a USB power source (e.g., computer, wall adapter).
- During charging, the power button will blink red.
- Once fully charged, the power button will show a constant green light.
Техникалык тейлөө
- Тазалоо: Жарыкты жумшак менен сүртүңүз, гamp Кирди жана таштандыларды кетирүү үчүн чүпүрөк колдонуңуз. Катуу химиялык заттарды же абразивдүү материалдарды колдонбоңуз.
- Суу каршылык: The CL01 Pro is IPX6 water-resistant, meaning it can withstand heavy rain and splashes. However, it is not designed for submersion. Ensure the USB-C port cover is properly sealed when not charging to maintain water resistance.
- Сактагыч: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery to approximately 50% to prolong its lifespan.
Проблемаларды чечүү
- Жарык күйбөйт: Ensure the battery is charged. If the battery indicator shows low power, charge the device.
- Light modes are not changing: Check if the light is in Auto On-off/Brake Detection mode. If so, exit this mode to manually cycle through modes.
- Brake detection not working: Ensure the light is securely mounted and the Auto On-off/Brake Detection mode is activated.
- Заряддоо маселелери: Verify the USB-C cable and power source are functioning correctly. Ensure the cable is fully inserted into the charging port.
- If you experience any other issues, please refer to the warranty and support section.
Колдонуучу сунуштар
- Always ensure your CL01 Pro is fully charged before long rides to maximize visibility and safety.
- Utilize the Auto On-off and Brake Detection features for enhanced safety and battery life, especially during commutes or group rides.
- Periodically check the mounting bracket for tightness to prevent the light from shifting or falling during your ride.
- Clean the light's lens regularly to maintain optimal brightness and visibility.
Кепилдик жана колдоо
For warranty information, technical support, or any product-related inquiries, please contact RAVEMEN customer service through their official webсайтына же продуктуну сатып алган сатуучуга кайрылыңыз. Кепилдик талаптары үчүн сатып алгандыгыңызды тастыктаган документти сактап коюңуз.
