Viladepot Smart Door Knob-D6 Instruction Manual

Продукт бүттүview

The Viladepot Smart Door Knob-D6 offers advanced security and convenience for your home. It features multiple unlocking methods including fingerprint recognition, app control via the Tuya Smart app, a touchscreen keypad for passcodes, key card access, and traditional mechanical keys for backup. Designed for easy installation, this smart lock is a modern solution for enhanced home security.

Packing List

Төмөндө көрсөтүлгөн бардык компоненттердин пакетте бар экенине ынаныңыз:

• Сырткы монтаж x 1
• Ички жыйын x 1
• Latch Bolt x 1
• Lock Fixing Column x 1
• Fixing Column x 2
• Fixing Post x 2
• Latch Screws x 4
• Strike Plate x 1
• Plastic Box x 1
• Жаз x 1
• Fob card x 2
• Backup Keys x 2
• Колдонуучунун колдонмосу x 1

Орнотуу боюнча колдонмо

Follow these steps carefully for proper installation. For a visual guide, please refer to the installation video below.

Video: Step-by-step installation process for the Viladepot Smart Door Knob-D6.

1. Step 1: Install the lock body. Drill holes on the door and install the lock body according to the provided drawings.

   

2. Step 2: Install the front panel copper column. Install the two screw bolts on the front cover. Insert the hollow square bar into the bottom of the front lever and let the data line stick out.
3. Step 3: Install the square bar. Please ensure the square bar is inserted into the front handle to the end; otherwise, it will affect the normal use of the product.
4. Step 4: Remove the rear panel baffle.
5. Step 5: Insert the exterior assembly into the door hole.
6. Step 6: Install the spring and the rear panel. Note: Install the spring to prevent the square bar from detaching from the front handle and causing malfunction.
7. Step 7: Connect the data cable. Be sure to follow the markings (red to red) to connect the cable terminal to the female socket of the setting board; otherwise, it will cause a short circuit in the product.
8. Step 8: Screw on the screws, install the battery and baffle. Install four #7 (AAA) alkaline batteries. Press down to open the battery cover.

The handle is reversible for both left-handed and right-handed doors.

App Configuration & Operating Instructions

To unlock the full potential of your smart lock, configure it with the Tuya Smart app.

Колдонмону орнотуу:

1. Түзмөгүңүздүн колдонмолор дүкөнүнөн "Tuya Smart" колдонмосун жүктөп алып, орнотуңуз.
2. Open the Tuya Smart app, click the "+" icon, and then click "Add Device" to prepare for pairing.
3. On the smart lock keypad, enter "123456" to activate wireless pairing mode.
4. After approximately 10 seconds, the device should automatically appear in the app. Click on it to pair.

Эскертүү: If the device has already been added to another phone, it will enter standby mode instead of pairing mode.

Кулпуну ачуу ыкмалары:

• Манжа ачуу: In the app, navigate to "Family" and select "Fingerprint" to add new fingerprints. Follow the in-app instructions to register your fingerprint. Ensure your fingers are clean and dry for accurate recognition.
• Кулпуну ачуу коду: In the app, go to "Family" and select "Password" to set up new passcodes. You can create 6-10 digit passwords.
• Ачкыч картасынын кулпусун ачуу: In the app, select "Card" to add new key cards. Present the key card to the lock's sensor for registration.
• Колдонмонун алыстан кулпусун ачуу: Once paired, you can remotely unlock the door directly from the Tuya Smart app. The app also provides a log of all unlock records.
• Механикалык ачкыч кулпусун ачуу: For emergency situations or when batteries are depleted, use the provided backup mechanical keys to unlock the door.

Техникалык тейлөө

• Батареяны алмаштыруу: We recommend replacing the four #7 (AAA) batteries every 180 days. Monitor the battery level weekly via the Tuya app; replace promptly if it falls below 30%.
• Коргоочу пленка: The front and rear handles are covered with protective film. Tear off the protective film after the door lock installation is completed.

Көйгөйлөрдү чечүү (Көп берилүүчү суроолор)

Q: How do I add fingerprints?

A: We recommend checking the Quick Installation Guide (App Configuration section) and following the steps accordingly to complete the setup. If you need any assistance, please contact us at support@viladepot.com.

Q: How long after should I replace the battery?

A: We recommend replacing the battery after 180 days (please make sure the battery is fully charged). In addition, we recommend keeping an eye on the battery level weekly via the Tuya app; if it is less than 30%, please replace the battery promptly.

С: Манжа изин таануу иштебей жатат.

A: If the smart lock has power, try again by changing to a different angle. If it has no power, you need to use a spare key to unlock the door to replace the battery. If none of the above methods are available, please contact us promptly.

Техникалык шарттар

Кепилдик жана колдоо

Your Viladepot Smart Door Knob-D6 comes with a 30-day worry-free money-back guarantee and a 1-year limited warranty. For any problems or assistance, please feel free to contact us.

Электрондук почта: support@viladepot.com