Makita LS1040 10 дюймдук кошулма кыйгач араа үчүн колдонмо

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Makita LS1040 10-inch Compound Miter Saw. Please read and understand all instructions before using the tool. Retain this manual for future reference.

Коопсуздук маалыматы

Always prioritize safety when operating power tools. Failure to follow safety instructions can result in serious injury or property damage. This section highlights critical safety practices.

• Жеке коргонуу каражаттары: Always wear eye protection (safety glasses or goggles), hearing protection, and a dust mask.
• Иш чөйрөсү: Жумуш аймагыңыз таза, жакшы жарык жана баш аламандык жок болушун камсыз кылыңыз. Балдарды жана жанындагыларды алыс кармаңыз.
• Электр коопсуздугу: г-де электр аспаптарын иштетпеңизamp or wet locations. Avoid using the tool with damaged cords.
• Бычактын коопсуздугу: Ensure the blade is sharp and correctly installed. Never bypass safety guards. Disconnect power before changing blades or performing maintenance.
• Жумушчу бөлүгүн камсыздоо: Даярдоо бөлүгүн ар дайым cl менен бекем бекитиңизamps or the provided vise to prevent movement during cutting.
• Туура операция: Maintain a firm grip on the tool. Do not overreach. Use the correct blade for the material being cut.

Жайгашуу

Proper setup ensures accurate and safe operation of your miter saw.

Таңгактан чыгаруу жана алгачкы текшерүү

Carefully remove all components from the packaging. Inspect the saw for any signs of damage that may have occurred during shipping. The package should include the Makita LS1040 10-inch Compound Miter Saw, a 10-inch 40T Micro-Polished Miter Saw Blade (A-93669), a dust bag, a socket wrench (782232-8), a triangular rule (762001-3), and a vertical vise (122536-0).

Figure 1: The Makita LS1040 10-inch Compound Miter Saw, showing its main components including the blade guard and dust bag.

Чаң баштыгын бекитүү

The included dust bag helps collect sawdust during operation. Attach it to the dust port at the rear of the saw. Ensure it is securely fastened to prevent it from detaching during use.

Figure 2: Detail of the Makita dust bag, part no. 122529, attached to the saw's dust collection port.

Кыйшайуу бурчтарын жөндөө

The miter saw allows for precise angle cuts. To adjust the miter angle:

1. Loosen the miter lock handle located at the front of the base.
2. Press the miter angle release button (if present) and pivot the turntable to the desired angle. The scale on the base indicates angles from 0° to 45° left and 0° to 52° right.
3. The saw features positive stops at common angles such as 0°, 15°, 22.5°, 30°, and 45° (left or right).
4. Once the desired angle is set, tighten the miter lock handle firmly to secure the turntable.

Figure 3: The miter scale on the saw's base, showing angle markings and the adjustment handle for setting precise miter cuts.

Figure 4: A hand demonstrating the adjustment of the miter angle lock, allowing the user to set the cutting angle.

Жөндөө бурчтары

The saw can also make bevel cuts up to 45° to the left.

1. Loosen the bevel lock knob at the rear of the saw.
2. Араанын башын каалаган кыйшайуу бурчуна кыйшайтыңыз.
3. Араа башын ордуна бекитүү үчүн конус бекитүү баскычын бекемдеңиз.

Figure 5: The bevel angle scale, indicating the range of tilt for the saw head, with the adjustment mechanism visible.

Иштеп жатат

Follow these steps for safe and effective operation of your Makita LS1040 miter saw.

Күйгүзүү жана өчүрүү

To turn the saw on, press the safety button and squeeze the trigger switch. To turn it off, release the trigger switch. Always ensure the saw is unplugged when not in use or when performing adjustments.

Жумушчу бөлүгүн камсыз кылуу

Always use the vertical vise or appropriate clamps to firmly secure the workpiece to the saw's fence and base. This prevents the material from shifting during the cut, which can cause kickback or inaccurate results.

Figure 6: The vertical vise accessory, used to securely hold the workpiece against the saw's fence during cutting operations.

Кесүү

1. Ensure the workpiece is properly secured and the desired miter and/or bevel angles are set.
2. тутканы бекем кармаңыз.
3. Press the safety button and squeeze the trigger to start the motor. Allow the blade to reach full speed before beginning the cut.
4. Даярдама аркылуу араанын башын акырын түшүрүңүз. Кесүүгө мажбурлабаңыз.
5. Кесүү аяктагандан кийин, араанын башын көтөрүүдөн мурун триггерди бошотуп, бычакты толугу менен токтотууга мүмкүнчүлүк бериңиз.

Blade Guard Operation

The saw is equipped with a clear plastic blade guard that automatically retracts as the blade descends into the workpiece and covers the blade as it rises. This guard is a critical safety feature and should never be removed or tampменен жасалган.

Техникалык тейлөө

Regular maintenance extends the life of your tool and ensures safe operation.

Бычакты алмаштыруу

Always disconnect the saw from the power source before attempting to change the blade. Use the provided wrench to loosen the arbor bolt. Carefully remove the old blade and install the new blade, ensuring the teeth are oriented correctly. Tighten the arbor bolt securely. Refer to the detailed instructions in the full product manual for specific steps, as some bolts may require significant force to loosen.

Тазалоо

After each use, empty the dust bag and clean any accumulated sawdust from the saw's base, fence, and blade guard. Use a dry cloth or compressed air. Do not use solvents that could damage plastic components.

Жалпы текшерүү

Periodically inspect the power cord for damage, check all fasteners for tightness, and ensure all moving parts operate smoothly. If any damage or excessive wear is observed, discontinue use and seek professional repair.

Проблемаларды чечүү

This section addresses common issues you might encounter with your Makita LS1040 miter saw.

• Араа башталбайт: Check if the power cord is securely plugged in. Ensure the safety button is pressed before squeezing the trigger. Verify the power outlet is functional.
• Так эмес кесүүлөр: Check that the miter and bevel angles are correctly set and locked. Ensure the workpiece is firmly secured and not shifting during the cut. Inspect the blade for dullness or damage; a dull blade can cause inaccurate cuts. Verify the fence is square to the blade.
• Ашыкча титирөө же ызы-чуу: This could indicate a loose blade, a damaged blade, or an internal mechanical issue. Disconnect power and inspect the blade. If the issue persists, professional service is recommended.
• Blade Not Cutting Smoothly: The blade may be dull or incorrect for the material. Replace the blade or ensure you are using the appropriate blade type.

For issues not covered here or if problems persist, contact Makita customer support or an authorized service center.

Техникалык шарттар

Кепилдик

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it for a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for a period of БИР ЖЫЛ from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please refer to makitatools.com for complete details and the most current warranty information.

Колдоо

For technical assistance, parts, or service inquiries, please contact Makita U.S.A., Inc. customer support.

• Телефон: 800/4-MAKITA (800/462-5482)
• Webсайт: makitatools.com

Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network throughout the U.S.