Westek 6603BC 3-Level Touch Control Lamp Socket Dimmer Instruction Manual

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Westek 6603BC 3-Level Touch Control Lamp Socket Dimmer. This device converts any lamp with a metal socket into a touch-controlled lamp, offering three levels of illumination.

Маанилүү: This dimmer is designed for use with incandescent bulbs up to 150W. It is not compatible with CFL or non-dimmable LED bulbs. Dimmable LED bulbs may work, but performance can vary.

Коопсуздук маалыматы

Ар дайым lamp from the wall outlet before installation or maintenance.
л ашпагылаamp ватtage specified for your lamp fixture. The dimmer supports up to 150W incandescent bulbs.
l камсыз кылууamp has a metal socket for proper operation. This dimmer will not function with plastic sockets.
Do not use this dimmer control with another dimmer in the same circuit.
Operate within the specified temperature range: 32°F to 104°F (0°C to 40°C).

Продукт бүттүview

The Westek 6603BC is a compact screw-in device that adds touch control dimming functionality to compatible lamps.

Westek 6603BC Touch Control Lamp Socket Dimmer, front view

Сүрөт 1: Алдыңкы view of the Westek 6603BC Touch Control Lamp Socket Dimmer. The device is white with a brass screw-in base and a socket for a light bulb at the top.

Westek 6603BC Touch Control Lamp Socket Dimmer, side view

2-сүрөт: Каптал view of the Westek 6603BC Touch Control Lamp Socket Dimmer, showing its compact design.

Westek 6603BC Touch Control Lamp Socket Dimmer, top view of bulb socket

3-сүрөт: Жогорку view of the dimmer's bulb socket, showing the internal contacts where the light bulb screws in.

Орнотуу жана орнотуу

Follow these steps to install your touch control dimmer:

L даярдагылаamp: Сиздин l камсыз кылууamp is unplugged from the wall outlet. Remove the lamp shade and the existing light bulb.
Check Socket Material: Verify that your lamp бар metal socket. This dimmer will not work with plastic sockets.
Install Dimmer: Screw the Westek 6603BC dimmer firmly into your lamp's metal socket.
Лампаны орнотуу: Screw an ordinary one-way incandescent light bulb (up to 150W) into the dimmer's socket. Even if your lamp originally used a 3-way bulb, a standard one-way bulb is required for this dimmer.
Туташуу кубаты: lamp дубал розеткасына.
L жандырууamp: Эгерде сиздин лamp has an existing switch, turn it to the "ON" position (or the second position for 3-way sockets) to allow the dimmer to function.

Video 1: A short demonstration of the Westek 6603BC dimmer in operation, showing how to touch a metal part of the lamp to cycle through light levels. This video is provided by AmerTac, the manufacturer.

Иштөө нускамалары

Once installed and powered, operate the dimmer by touching any metal portion of your lamp:

Биринчи тийүү: иштетет Night Light level (low brightness).
Экинчи тийүү: иштетет Орто level (normal room light brightness).
Үчүнчү тийүү: иштетет Жогорку level (full brightness for reading or maximum illumination).
Төртүнчү тийүү: l буратamp ӨЧҮРҮҮ.

The dimmer will cycle through these four states with each subsequent touch.

Техникалык тейлөө

The Westek 6603BC dimmer requires minimal maintenance. Ensure the device and lamp are unplugged before cleaning.

Wipe the exterior of the dimmer with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Periodically check the electrical connections for any signs of wear or damage.
Replace incandescent bulbs as needed, ensuring they do not exceed 150W.

Проблемаларды чечүү

Көйгөй	Мүмкүн себеп	Чечим
Dimmer does not respond to touch.	Lamp ажыратылган. Lamp's original switch is OFF. Lamp socket is plastic. Loose connection between dimmer and lamp розетка.	lamp into a live wall outlet. l буруңузamp's original switch to the ON position. l камсыз кылууamp has a metal socket. This dimmer is not compatible with plastic sockets. lamp, then firmly screw the dimmer into the lamp розетка.
Light flickers or does not dim properly.	Using a non-incandescent bulb. Лампочка ватtage exceeds 150W. Using a non-dimmable LED or CFL bulb.	Ensure you are using an incandescent bulb up to 150W. Replace with an incandescent bulb within the 150W limit. If using an LED bulb, ensure it is explicitly labeled as "dimmable" and test for compatibility. Incandescent bulbs are recommended for optimal performance.
Dimmer turns on randomly or behaves erratically.	Interference from another dimmer on the same circuit. Бузулган бирдик.	Do not use this dimmer on a circuit that already has another dimmer installed. If the issue persists, the unit may be faulty and require replacement.

Техникалык шарттар

Өзгөчөлүк	Деталь
Модель номери	6603 BC
Бренд	Westek
Иштөө режими	ON-OFF, 3-Level Dimming
Учурдагы рейтинг	1.25 Amps
Operating Voltage	120 вольт
Шайкеш түзмөктөр	Ысытуу лампалары (150 Вт чейин)
Башкаруу ыкмасы	тийүү
Позициялардын саны	3 (Night Light, Medium, High) + OFF
Элементтин өлчөмдөрү (L x W x Y)	2.75 x 1.75 x 1.75 дюйм
Элемент Салмагы	4 унция
Материал	Metal (contact material)
Өндүрүүчү	AMERTAC-WESTEK
Иштөө температурасы	32°F – 104°F (0°C – 40°C)

Кепилдик маалымат

This product comes with a manufacturer's warranty. Please refer to the packaging or contact Westek customer service for specific warranty terms and conditions.

Кардарларды колдоо

For further assistance, technical support, or to inquire about replacement parts, please contact Westek customer service. Contact information can typically be found on the product packaging or the official Westek webсайт.