Introduction
The Arrow T2025 Dual Purpose Staple Gun is a versatile tool designed for both flat crown and round crown stapling applications. Its robust all-steel construction ensures durability, while features like the lock-down handle, staple height adjustment guide, and patented jam-proof mechanism enhance usability and reliability. This stapler is ideal for various low voltage wiring jobs up to ¼ inch wide, including installing telephones, intercoms, security cameras, burglar alarm systems, cable TV, and computer wiring. It accommodates T25 staple sizes 3/8-inch (10mm), 7/16 (11mm), 9/16-inch (14mm), and T20 staple sizes 5/16-inch (8mm), 3/8-inch (10mm), 1/2-inch (12mm).
Figure 1: Arrow T2025 Dual Purpose Staple Gun, showcasing its chrome finish and red handle.
Жайгашуу
Степлер жүктөлүүдө
- Туткасын ачыңыз: Ensure the handle is unlocked by releasing the lock mechanism, typically a small wire clip at the rear of the handle.
- Open the Magazine: Locate the staple magazine release at the bottom rear of the stapler. Press or pull it to slide out the staple magazine.
- Степлер кыстаруу: Insert a full strip of either T20 flat crown or T25 round crown staples into the magazine with the staple points facing forward.
- Close the Magazine: Slide the magazine back into the stapler until it clicks securely into place.
Adjusting Staple Height/Depth Guide
The T2025 features an exclusive built-in adjustable staple guide that allows you to change the depth of the staples being driven. This is particularly useful for wire and cable applications to prevent damage.
- Locate the adjustment mechanism, usually a knob or lever near the front of the stapler.
- Turn or slide the mechanism to adjust the staple depth. Test on a scrap piece of material to ensure the desired depth is achieved without damaging the material or wire.
Figure 2: Diagram showing the dimensions of the Arrow T2025 Dual Purpose Staple Gun and indicating its compatibility with T25 round crown staples.
Иштөө нускамалары
Жалпы операция
- Position the Stapler: Place the stapler firmly against the surface where the staple is to be driven. Ensure the nose of the stapler is flush with the material.
- Squeeze the Handle: Apply firm, even pressure to the "easy squeeze" double leverage handle. The patented mechanism is designed for efficient stapling with less effort.
- Release and Repeat: Release the handle after the staple is driven. Reposition the stapler as needed for subsequent staples.
Using with Flat Crown Staples (T20)
For standard stapling jobs such as attaching vapor barriers, upholstery, or general fastening, use T20 flat crown staples. Ensure the staple guide is set appropriately for the material thickness.
Using with Round Crown Staples (T25) for Wiring
The T2025 is specifically designed for low voltage wiring jobs up to ¼ inch (6mm) wide. This includes applications like telephone lines, intercoms, security camera cables, burglar alarm systems, cable TV, and computer network cables.
- Select T25 Staples: Use appropriate T25 round crown staples (3/8", 7/16", 9/16") for your cable size.
- Position Cable: Guide the cable into the round crown channel at the front of the stapler.
- Тереңдикти тууралоо: Utilize the adjustable staple guide to ensure the staple secures the cable without pinching or damaging the insulation. A half-squeeze of the handle can help position the guide neatly around the cable before fully driving the staple.
- Drive Staple: Firmly squeeze the handle to drive the staple over the cable.
Figure 3: A hand demonstrating the use of the Arrow T2025 Staple Gun for fastening materials.
Техникалык тейлөө
- Тазалоо: Keep the stapler clean and free of dust, debris, and adhesive residue. Use a dry cloth to wipe down the exterior. Avoid using harsh chemicals or solvents.
- Майлоо: Periodically apply a small amount of light machine oil to moving parts, such as the pivot points and the staple pusher mechanism, to ensure smooth operation.
- Сактагыч: Store the stapler in a dry environment to prevent rust. Engage the handle lock to keep the handle compressed and reduce spring tension during storage.
Проблемаларды чечүү
- Степлер атылбай жатат:
- Ensure the staple magazine is fully loaded and correctly inserted.
- Verify the handle lock is disengaged.
- Apply firm and complete pressure to the handle.
- Степлер толук айланбай жатат:
- Check if the correct staple size is being used for the material.
- Ensure the staple height adjustment guide is set correctly.
- Apply more firm pressure to the stapler against the surface.
- Степлерлердин тыгылып калышы:
The Arrow T2025 features a patented jam-proof mechanism designed to prevent staple jams. In the rare event of a malfunction:
- Unload the staples from the magazine.
- Inspect the staple channel for any bent or misaligned staples and carefully remove them.
- Reload staples and test operation.
Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Модель номери | T2025 |
| Бренд | Жебе |
| Материал | Эритме болот |
| Түс | Silver |
| Продукциянын өлчөмдөрү | 18.42 x 16.51 x 2.54 см |
| Элемент Салмагы | 322 г |
| Степлердин шайкештиги | T20 Flat Crown (5/16", 3/8", 1/2"), T25 Round Crown (3/8", 7/16", 9/16") |
| Кубаттуулуктун сүрөттөлүшү | Full Strip |
| Камтылган компоненттер | Arrow Fastener T2025 Dual Purpose Staple Gun and Wire Tacker |
| Келип чыккан өлкө | АКШ |
Кепилдик маалымат
The Arrow Fastener T2025 Dual Purpose Staple Gun comes with a warranty of 90 Days from Date of Purchase. Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.
Колдоо
For further assistance, technical support, or inquiries regarding your Arrow T2025 Dual Purpose Staple Gun, please contact Arrow Fastener customer service. Refer to the packaging or the official Arrow Fastener webакыркы байланыш маалыматы үчүн сайт.
