Достор 91712

Fellowes Standard Monitor Riser 91712 колдонуу боюнча колдонмо

Модель: 91712

Introduction

This manual provides instructions for the proper setup, operation, and maintenance of your Fellowes Standard Monitor Riser, Model 91712. Designed to elevate your monitor to an ergonomic viewing height, this riser helps reduce neck and eye strain, promoting a more comfortable workspace. Please read these instructions carefully before use.

Fellowes Standard Monitor Riser, Platinum/Graphite

Image: The Fellowes Standard Monitor Riser, a sturdy platform with adjustable legs, in platinum and graphite colors.

Орнотуу нускамалары

Follow these steps to assemble and set up your monitor riser:

  1. Компоненттерди таңгактан чыгаруу: Carefully remove all components from the packaging. You should have one platform and four adjustable leg sections.
  2. Буттарды бекитүү: Insert each leg section firmly into the designated holes on the underside of the platform. Ensure they are securely seated.
  3. Бийиктигин тууралоо: The riser offers three height adjustments: 2 inches, 2.75 inches, and 4 inches. To adjust, pull the leg sections apart or push them together until the desired height is achieved. Ensure all four legs are set to the same height for stability.
  4. Three height adjustment options for the monitor riser

    Image: Visual representation of the three height settings (2", 2.75", 4") for the monitor riser.

  5. Apply Non-Skid Feet: Ensure the non-skid rubber feet are securely attached to the bottom of each leg. These provide stability and prevent sliding on your desk surface.
  6. Close-up of monitor riser leg with non-slip foot

    Сүрөт: жакын план view of an adjustable leg and its non-slip rubber foot, highlighting the simple height adjustment mechanism.

  7. Position Monitor: Place your monitor centrally on the riser platform. Ensure the monitor's base fits within the platform's dimensions.
  8. Кабелдик башкаруу: Utilize the integrated cable and power-cord guides on the riser to route your monitor's cables neatly, reducing clutter.
  9. Monitor riser with cables routed through integrated management system

    Image: A close-up showing cables being routed through the built-in cable management slots on the monitor riser.

Иштөө нускамалары

The Fellowes Standard Monitor Riser is designed for straightforward use:

  • Эргономикалык жайгаштыруу: Position your monitor so the top of the screen is at or slightly below eye level. This helps maintain a neutral neck posture.
  • Person working at a desk with a monitor elevated by the riser

    Image: A person seated at a desk, demonstrating the ergonomic benefit of an elevated monitor using the Fellowes riser.

  • Салмак сыйымдуулугу: The riser is designed to support monitors weighing up to 60 lbs (27.2 kg). Do not exceed this weight limit to ensure stability and prevent damage.
  • Monitor riser with an icon indicating a 60 lbs weight capacity

    Image: The monitor riser with a graphic indicating its maximum weight capacity of 60 lbs.

  • Мейкиндикти пайдалануу: The space beneath the riser can be used for storing keyboards, mice, or other small office supplies, helping to keep your desk organized.

Техникалык тейлөө

To ensure the longevity and proper function of your monitor riser:

  • Тазалоо: бети жумшак менен сүртүп, гamp cloth. Avoid abrasive cleaners or solvents that may damage the plastic.
  • Текшерүү: Periodically check the leg connections and non-skid feet to ensure they are secure and intact.

Проблемаларды чечүү

If you encounter any issues with your monitor riser, consider the following:

  • Туруксуздук: Ensure all four legs are fully inserted into the platform and set to the same height. Verify that the non-skid feet are properly attached and making full contact with the desk surface.
  • Sagging Platform: Check that the weight of your monitor does not exceed the 60 lbs (27.2 kg) capacity. Distribute the weight evenly on the platform.

Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номери91712
МатериалHigh-impact Plastic
ТүсPlatinum/Graphite
Продукциянын өлчөмдөрү (L x W x Y)13.63 x 13.75 x 2.75 inches (at lowest height)
Жөнгө салынуучу бийиктиктер2 дюйм, 2.75 дюйм, 4 дюйм
Салмак сыйымдуулугу60 фунтка чейин (27.2 кг)
Элемент Салмагы1.28 фунт (0.58 кг)

Кепилдик маалымат

The Fellowes Standard Monitor Riser (Model 91712) is backed by a 5 жылдык чектелген кепилдик. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Fellowes webсайтка же түздөн-түз кардарларды колдоо менен байланышыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Колдоо

For further assistance, product inquiries, or to report any issues, please visit the official Fellowes webсайтына кириңиз же алардын кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматтарын, адатта, өндүрүүчүнүн веб-сайтынан тапса болот webсайттын "Колдоо" же "Биз менен байланыш" бөлүмдөрүнөн.

Fellowes Official Webсайт: www.fellowes.com

Тектеш документтер - 91712

Preview Fellowes Breyta Monitor Stand: Ergonomic Setup and Safety Guide
Comprehensive guide to the Fellowes Breyta Monitor Stand, covering setup, weight capacity, ergonomic adjustments, and recycling information. Features model numbers 100016560 and 100016561.
Preview Fellowes Lotus DX Sit-Stand Workstation User Manual
Comprehensive guide for the Fellowes Lotus DX Sit-Stand Workstation, covering setup, features, safety instructions, cable management, and warranty information.
Preview Fellowes 91450 LCD/TFT Monitor Riser Height Adjustment Guide
Step-by-step instructions and visual guide to adjust the height of your Fellowes 91450 LCD/TFT Monitor Riser to one of three ergonomic positions. Includes product details and manufacturer information.
Preview Fellowes Platinum Series Dual Monitor Arm 8042501 - Installation Guide
Installation and user guide for the Fellowes Platinum Series Dual Monitor Arm (Model 8042501). This guide provides detailed instructions for assembly, parts identification, and usage, supporting dual monitors up to 32 inches with VESA compatibility.
Preview Fellowes Standard Adjustable Foot Rest (48121/48121-70) - User Guide
Detailed user guide for the Fellowes Standard Adjustable Foot Rest, model 48121/48121-70. Learn about its features, assembly, adjustment, and important safety warnings. Supports up to 45kg (99lbs) with adjustable height and tilt.
Preview Fellowes Platinum Series Triple Monitor Arm 8042601 User Manual
User manual for the Fellowes Platinum Series Triple Monitor Arm (Model 8042601). Provides assembly instructions, adjustment guides, specifications, and safety precautions for mounting up to three monitors.