Creative Labs Inspire 5500 5.1 санариптик айлана-чөйрөнү чагылдыруучу динамик системасынын колдонуучу колдонмосу

1. Киришүү

The Creative Inspire 5.1 Digital 5500 speaker system is designed to enhance audio experiences for video gaming and DVD movie playback. This system features five satellite speakers, a powerful wooden subwoofer, a decoder with Dolby Digital and Dolby Pro Logic technologies, and a wireless remote control. It supports connectivity to various audio sources through digital optical, digital coaxial, and analog stereo input jacks. The system delivers 48 watts RMS power, with 6 watts for each satellite speaker and 18 watts for the subwoofer.

2. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• Three (3) Front Satellite Speakers
• Two (2) Rear Satellite Speakers
• One (1) Subwoofer
• Динамик кабельдер
• One (1) Decoder Box
• Бир (1) зымсыз алыстан башкаруу пульту
• Алыстан башкаруу үчүн батареялар
• Desktop Stands for Satellite Speakers
• Facedown Monitor Stand for Center Speaker
• Кубаттуу адаптер
• Ыкчам баштоо боюнча колдонмо
• Колдонуучунун колдонмосу (бул документ)

3. Орнотуу нускамалары

1. Спикердин жайгашуусу:
   • Position the three front satellite speakers (left, center, right) in front of your listening area. The center speaker should be directly in front of you, typically above or below your display.
   • Place the two rear satellite speakers (left rear, right rear) behind your listening area, ideally at ear level.
   • Position the subwoofer on the floor, preferably in a corner or near a wall, to optimize bass response.
2. Спутниктик динамиктерди сабвуферге туташтыруу:

   Connect each satellite speaker to the corresponding output on the subwoofer using the provided speaker cables. Ensure correct polarity (positive to positive, negative to negative).

3. Connect Subwoofer to Decoder:

   Connect the subwoofer to the decoder box using the appropriate cable.
4. Connect Decoder to Audio Source:

   Choose one of the following connection methods based on your audio source:

   • Санариптик оптикалык: Connect an optical cable from your DVD player, game console, or PC's optical output to the decoder's digital optical input.
   • Санариптик коаксиалдуу: Connect a coaxial cable from your audio source's coaxial output to the decoder's digital coaxial input.
   • Analog Stereo: Connect an analog stereo cable (RCA or 3.5mm jack, depending on your source) from your audio source to the decoder's analog stereo input.
5. Туташуу кубаты:

   Connect the power adapter to the decoder box, then plug the power adapter into a wall outlet.

4. Иштөө нускамалары

1. Күйгүзүү/өчүрүү:

   Press the Power button on the decoder box or the wireless remote control to turn the system on or off. An indicator light will confirm the power status.

2. Киргизүүнү тандоо:

   Use the Input button on the decoder or remote to cycle through available audio inputs (Digital Optical, Digital Coaxial, Analog Stereo) until your desired source is selected.
3. Үндү көзөмөлдөө:

   Adjust the master volume using the Volume Up/Down buttons on the remote or the volume knob on the decoder. Individual channel levels (front, rear, center, subwoofer) may also be adjustable via the remote for fine-tuning.

4. Dolby Digital / Dolby Pro Logic:

   When a compatible digital audio signal (Dolby Digital) is detected, the system will automatically process it for 5.1 surround sound. For stereo sources, the Dolby Pro Logic mode can be engaged (if available on your decoder) to simulate surround sound.

5. Алыстан башкаруу:

   The wireless remote provides convenient control over power, input selection, volume, and potentially individual speaker levels and sound modes. Ensure batteries are correctly installed.

5. Техникалык тейлөө

• Тазалоо: Динамиктин беттерин тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Вентиляция: Ensure the subwoofer and decoder have adequate ventilation to prevent overheating. Do not block vents.
• Кабелдик башкаруу: Keep cables organized and away from foot traffic to prevent damage and tripping hazards.
• Курчап турган чөйрө: Системаны экстремалдык температуранын, нымдуулуктун же тике күн нурунун таасиринен сактаңыз.

6. Кыйынчылыктарды

Үн жок:

• Ensure the system is powered on and the volume is not muted or set too low.
• Verify that the correct input source is selected on the decoder.
• Check all cable connections between the audio source, decoder, subwoofer, and satellite speakers.
• Confirm the audio source (e.g., DVD player, PC) is outputting sound.

Бурмаланган же начар үн сапаты:

• Reduce the volume to check if distortion is due to excessive loudness.
• Ensure speaker cables are securely connected and not damaged.
• Check the audio settings on your source device.
• Verify that the speakers are correctly positioned and not obstructed.

Алыстан башкаруу иштебейт:

• Пульттагы батарейкаларды алмаштырыңыз.
• Ensure there are no obstructions between the remote and the decoder's IR receiver.
• Point the remote directly at the decoder.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Creative webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Онлайн ресурстар: For the latest drivers, software, and support documentation, please visit www.creative.com/support (мисampле шилтеме, чыныгы шилтеме ар кандай болушу мүмкүн).