1. Киришүү
This manual provides essential information for the safe and effective use of your wolfcraft 2144000 Mounted Stone Set. Please read these instructions carefully before operation and retain them for future reference.
Продукт бүттүview
The wolfcraft Mounted Stone Set is designed for grinding and finishing various materials, including metals, glass, ceramics, and plastics. The set includes five mounted stones of different shapes and one dressing stone for maintaining the abrasive surfaces.
Figure 1: The wolfcraft 2144000 Mounted Stone Set, featuring five distinct grinding stone shapes and a dressing stone.
Камтылган компоненттер
- 5 x Mounted Grinding Stones (various shapes)
- 1 x Dressing Stone
2. Коопсуздук нускамалары
Жараат жана буюмга зыян келтирбөө үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз.
- Жеке коргонуу шаймандарын (ЖКК) кийиңиз: Always wear safety glasses, hearing protection, and gloves when operating rotary tools with mounted stones.
- Check RPM Limits: Ensure the RPM of your rotary tool does not exceed the maximum RPM specified for the mounted stones (max. 23,000 RPM).
- Коопсуз жумуш бөлүгү: Иштеп жаткан учурда кыймылга жол бербөө үчүн даярдоо бөлүгүн ар дайым бекем бекитиңиз.
- Inspect Stones: Before each use, inspect the mounted stones for any damage, cracks, or excessive wear. Do not use damaged stones.
- Туура монтаждоо: Ensure the mounted stone is securely fastened in the chuck of your rotary tool.
- Вентиляция: Work in a well-ventilated area to avoid inhaling dust particles.
- Ашыкча ысып кетүүдөн сактаныңыз: Do not apply excessive pressure, which can cause the stone or workpiece to overheat.
- Таза кармоо: Колдорду жана кенен кийимдерди айлануучу бөлүктөрдөн алыс кармаңыз.
Figure 2: Safety symbols indicating the necessity of eye protection, hearing protection, and gloves during operation. Also shown are maximum RPM and individual stone dimensions.
3. Орнотуу
Follow these steps to properly set up the mounted stones for use.
- Select the Appropriate Stone: Choose the mounted stone with the shape and grit suitable for your specific application and material.
- Айланма куралга салыңыз: Loosen the chuck of your rotary tool (e.g., drill, die grinder). Insert the shaft of the mounted stone into the chuck, ensuring it is seated deeply and securely.
- Чакты бекемдөө: Firmly tighten the chuck to prevent the stone from slipping during operation. Verify that the stone is centered and runs true.
- Verify RPM: Confirm that your rotary tool's speed setting does not exceed the maximum recommended RPM of 23,000 for these stones.
4. Иштөө нускамалары
Use the mounted stones for grinding, deburring, and shaping various materials.
Жалпы колдонуу
- Материалдык шайкештик: Suitable for metals, glass, ceramics, and plastic materials.
- Колдонмо: Apply light, consistent pressure. Allow the stone to do the work. Excessive pressure can lead to premature wear, overheating, and potential damage to the stone or workpiece.
- Кыймыл: Move the stone continuously across the workpiece to ensure even material removal and prevent grooving.
3-сүрөт: Мисample of a mounted stone in use, smoothing a circular opening in a workpiece, demonstrating its application for precise shaping.
Figure 4: A conical mounted stone deburring the interior edge of a metal pipe, illustrating its effectiveness for internal grinding and edge finishing.
5. Техникалык тейлөө
Using the Dressing Stone
Over time, grinding stones can become clogged with material or develop an uneven surface, reducing their effectiveness. The included dressing stone is used to clean and reshape the grinding stones.
- Mount the Grinding Stone: Secure the grinding stone you wish to dress in your rotary tool.
- Activate Rotary Tool: Turn on the rotary tool at a moderate speed.
- Dress the Stone: Gently press the rotating grinding stone against the dressing stone. Move the grinding stone across the surface of the dressing stone to remove clogged material and expose fresh abrasive particles. This also helps to restore the original shape of the stone.
- Текшерүү: After dressing, inspect the grinding stone to ensure it is clean and has a renewed abrasive surface.
Сактагыч
Store the mounted stone set in a dry place, away from moisture and direct sunlight, to prevent degradation of the abrasive material.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Начар майдалоо | Stone is clogged or worn out. | Use the dressing stone to clean and reshape. Replace if severely worn. |
| Ашыкча термелүү | Stone not securely mounted or damaged. | Ensure stone is tightly secured in the chuck. Inspect for damage and replace if necessary. |
| Overheating of workpiece/stone | Excessive pressure or incorrect RPM. | Reduce pressure. Verify RPM is within recommended limits. Allow cooling periods. |
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | 2144000 |
| Материал | Алюминий оксиди |
| Grat Type | Орточо (Кемчилик саны: 120) |
| Даана саны | 6 (5 mounted stones, 1 dressing stone) |
| Максималдуу RPM | 23,000 RPM |
| Шайкеш түзмөктөр | Rotary tools (e.g., drills, die grinders) |
| Элемент Салмагы | 0.352 унция (болжол менен 10 г) |
| Продукциянын өлчөмдөрү (болжол менен) | 0.24"L x 0.24"W (individual stone dimensions vary) |
| UPC/GTIN | 04006885214408 |
8. Кепилдик жана колдоо
wolfcraft products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the official wolfcraft webсайтка же кардарларды колдоо менен байланышыңыз.
Байланыш маалыматы
wolfcraft GmbH
Wolffstraße 1
59746 Кемпенич
Германия
Электрондук почта: info@wolfcraft.com
Webсайт: www.wolfcraft.com
Figure 5: wolfcraft's commitment to European manufacturing and recognition as a major German brand.
