Hunter чачыраткыч Node400 4 станциялуу сугат контроллери колдонуучунун колдонмосу

Introduction

Welcome to the user manual for the Hunter Node400 4-Station Irrigation Controller. This battery-powered controller is engineered for isolated sites and areas without traditional AC power, providing a reliable and efficient solution for automatic irrigation. Its robust, waterproof design ensures durability and consistent performance even in challenging valve box environments.

Продукт өзгөчөлүктөрү

• Fixed 4-station capacity for managing multiple irrigation zones.
• Maximum station run time of 6 hours, suitable for various watering needs.
• Manual cycle operation for immediate watering control.
• Easy retrieve memory feature to restore previous programming settings.
• Powered by one or two 9V batteries, offering flexibility and extended power.
• Easy-to-program LCD screen for clear visibility and intuitive setup.
• Master valve control capability for enhanced system management.
• Standard Hunter controller programming with 3 independent programs and 4 start times per program.
• Waterproof exterior designed for secure installation within a valve box.

Орнотуу жана орнотуу

The Hunter Node400 is engineered for quick and straightforward installation, typically mounting directly onto a valve's solenoid. This design minimizes the need for additional tools like screws or drills, simplifying the setup process.

Компоненттер бүттүview

Сүрөт: алдыңкы view of the Hunter Node400 controller, displaying the LCD screen, control buttons, and the colored wiring harness for connecting to irrigation stations.

Батарея орнотуу

1. Locate the battery compartment on the controller unit.
2. Insert one or two new 9V alkaline batteries, ensuring correct polarity as indicated inside the compartment. Using two batteries will extend the operational life of the controller.
3. Securely close the battery compartment cover to maintain the unit's waterproof seal.

Зымдарды туташтыруу

1. Connect the common wire from your irrigation valves to the common terminal on the Node400, typically labeled 'COM'.
2. Connect the individual zone wires from your valves to the corresponding station terminals (1, 2, 3, 4) on the Node400.
3. If utilizing a rain sensor, connect its wires to the designated sensor terminals (SEN) on the controller.

Image: Hunter Node400 controller shown with an optional mounting bracket, illustrating how the unit can be secured within a valve box for stable installation.

Иштөө нускамалары

The Node400 features an intuitive LCD screen and a user-friendly push-button interface for all programming and operational adjustments.

Негизги программалоо кадамдары

1. басыңыз PRG программалоо режимине кирүү үчүн баскычты басыңыз.
2. жебе баскычтарын колдонуңуз (< жана >) to navigate through various settings, including current time, start times, run times for each station, and specific watering days.
3. аркылуу маанилерди тууралаңыз + жана - баскычтар.
4. The controller supports 3 independent programs (A, B, C) and allows for up to 4 start times per program.
5. Set your desired watering days, which can include specific days of the week, odd/even days, or interval watering cycles.
6. After setting each parameter, ensure you confirm the selection to save the changes.

Кол менен иштетүү

To initiate a watering cycle manually, press the dedicated manual cycle button. This button is typically indicated by a water droplet symbol or a 'Manual' label on the controller's interface. You can usually select a specific station to run or activate all stations for a predetermined duration.

Техникалык тейлөө

Батареяны алмаштыруу

The Node400 operates on 9V batteries. For optimal performance and to prevent interruptions, it is recommended to check and replace the batteries annually or immediately when the low battery indicator appears on the LCD screen.

1. Батарея уясынын капкагын ачыңыз.
2. Carefully remove the old 9V batteries.
3. Insert new 9V alkaline batteries, ensuring correct polarity.
4. Close the battery compartment securely to maintain the waterproof integrity of the unit.

Сүрөт: Арткы view of the Hunter Node400 controller with a black protective cap, highlighting its compact and sealed design which contributes to its durability in outdoor environments.

Проблемаларды чечүү

• Контроллер күйбөй жатат: Verify that the batteries are correctly installed and are fresh. Replace old batteries if necessary.
• Stations Not Watering: Double-check all programming settings, including start times, run times, and watering days. Inspect wiring connections to the valves for any disconnections or damage. Ensure the master valve, if used in your system, is functioning correctly.
• Туруктуу операция: This can often be resolved by replacing the batteries. Also, ensure the controller's seals are intact and there is no moisture ingress into the unit.
• Программалоодогу кыйынчылыктар: If you encounter challenges with programming, refer to the detailed programming instructions available in the full product manual or on Hunter's official support resources. The 'easy retrieve memory' feature can be used to revert to previous settings if an error occurs during programming.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалымат

The Hunter Node400 Irrigation Controller is covered by a 2-year warranty period from the date of purchase. Please retain your original proof of purchase for any warranty claims.

Кардарларды колдоо

For further assistance, access to detailed programming guides, or technical support, please visit the official Hunter Industries webсайтка же түздөн-түз кардарларды тейлөө бөлүмүнө кайрылыңыз.