Liebherr GNP 2476 Premium NoFrost Тик тоңдургуч Колдонуучунун колдонмосу

1. Киришүү

Thank you for choosing a Liebherr appliance. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Liebherr GNP 2476 Premium NoFrost Upright Freezer. Please read these instructions carefully before using the appliance for the first time to ensure proper function and to prevent damage.

The Liebherr GNP 2476 is a freestanding upright freezer featuring NoFrost technology, designed to provide optimal freezing conditions and convenience by preventing ice build-up.

2. Коопсуздук нускамалары

• Электр коопсуздугу: Шаймандын жерге туташтырылган розеткага туура туташтырылганын текшериңиз. Узарткычтарды же бир нече розеткалуу адаптерлерди колдонбоңуз. Тазалоодон же техникалык тейлөөдөн мурун электр тармагынан ажыратыңыз.
• Вентиляция: Maintain adequate ventilation around the appliance as specified in the setup section to prevent overheating and ensure efficient operation.
• Күйүүчү материалдар: Do not store explosive substances or products containing flammable propellants (e.g., spray cans) inside the appliance.
• Балдар: Балдарды таңгактоочу материалдардан алыс кармаңыз. Балдар шайман менен ойнобосун текшериңиз.
• Зыян: If the appliance is damaged, especially the power cable, do not operate it. Contact customer service immediately.
• Жоюу: Dispose of the appliance responsibly at the end of its service life, following local regulations for recycling refrigerants and insulation materials.

3. Орнотуу

3.1 Пакеттен чыгаруу

Carefully remove all packaging materials. Retain packaging for potential future transport or return. Inspect the appliance for any transport damage.

3.2 Орнотуу

• Place the appliance on a firm, level floor. Use the adjustable feet to ensure stability and levelness.
• Avoid direct sunlight and proximity to heat sources such as ovens, radiators, or dishwashers.
• Ensure sufficient ventilation. Leave a minimum clearance of 5 cm at the sides and rear of the appliance for air circulation.
• Do not install the appliance in areas where the ambient temperature is likely to fall below the climate class specified on the rating plate.

3.3 Электрдик туташуу

After positioning the appliance, wait for at least 4 hours before plugging it into the mains power supply. This allows the refrigerant to settle. Connect the appliance to a 230V AC, 50Hz earthed socket. Ensure the voltage жана жыштык маалымат тактасындагы спецификацияларга дал келет.

3.4 Баштапкы баштоо

Once connected, the appliance will begin to cool. Set the desired temperature using the control panel. Allow the freezer to operate for several hours (e.g., 12-24 hours) before loading it with food, to ensure it reaches the optimal freezing temperature.

This image displays the Liebherr GNP 2476 upright freezer. The door is open, revealing six transparent freezer drawers. The top drawer is smaller, while the lower five are larger, designed for organized storage of frozen items. The control panel is visible at the top of the appliance.

4. Иштөө нускамалары

4.1 Температураны көзөмөлдөө

The temperature is set via the electronic control panel located at the top of the appliance. Use the '+' and '-' buttons to adjust the desired temperature. The display will show the current temperature inside the freezer. For optimal food preservation, a temperature of -18°C (0°F) or colder is recommended.

4.2 NoFrost системасы

Your Liebherr GNP 2476 is equipped with NoFrost technology. This system prevents the formation of ice and frost inside the freezer compartment by circulating cold air and expelling humidity. This eliminates the need for manual defrosting, saving you time and ensuring consistent freezing performance.

4.3 Жаңы тамак-ашты тоңдуруу

• Жаңы, бузулбаган азыктарды гана тоңдуруңуз.
• Суусузданууну жана даамдын өтүшүн алдын алуу үчүн тамак-ашты аба өткөрбөгөн идиштерге же тоңдургуч баштыктарга салыңыз.
• Do not place warm food directly into the freezer; allow it to cool down first.
• Distribute fresh food evenly across the drawers to allow for proper air circulation.
• Avoid placing large quantities of fresh food at once, as this can temporarily raise the internal temperature. Refer to the appliance's freezing capacity (e.g., 18 kg/24h) for guidance.

5. Техникалык тейлөө

5.1 Тазалоо

• Тазалоодон мурун: Ар дайым шайманды розеткадан сууруп туруңуз.
• Ички иштер: Clean the interior regularly with a soft cloth and a mild, food-safe cleaning solution (e.g., lukewarm water with a little vinegar or mild dish soap). Avoid abrasive cleaners or solvents. Dry thoroughly.
• Сырткы: Сырткы беттерин жумшак менен сүртүңүз, гamp кездеме. Дат баспас болоттон жасалган моделдер үчүн атайын дат баспас болоттон жасалган тазалагычты колдонуңуз.
• Эшик мөөр: Keep the door seal clean to ensure a tight closure and energy efficiency.
• Condenser (Rear): Periodically vacuum the condenser coils at the back of the appliance to remove dust and lint, which can impede cooling efficiency.

5.2 Эритүү

Thanks to the NoFrost technology, your Liebherr GNP 2476 freezer automatically defrosts. This means you do not need to manually defrost the appliance. Any accumulated frost is periodically melted and evaporated, keeping the freezer compartment free of ice.

6. Кыйынчылыктарды

Кардарларды тейлөө кызматына кайрылуудан мурун, төмөнкү жалпы маселелерди текшериңиз:

• Шайман муздабай жатат: Check if the power plug is securely inserted and if the circuit breaker has tripped. Ensure the temperature setting is correct.
• адаттан тыш ызы-чуу: Minor operating noises are normal. Check if the appliance is level and not touching a wall or other furniture.
• Excessive ice formation (if not NoFrost): Ensure the door is closing properly and the seal is intact. Avoid leaving the door open for extended periods. (Note: This model is NoFrost, so this issue should not occur significantly).
• Эшик туура жабылбай жатат: Check for obstructions, ensure drawers are fully pushed in, and inspect the door seal for damage or dirt.

If the problem persists after checking these points, please contact Liebherr customer service or a qualified technician.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Кепилдик маалыматы үчүн шайманыңыз менен кошо берилген кепилдик картасын караңыз же расмий Liebherr компаниясына баш багыңыз. website. In case of technical issues or if you require spare parts, please contact Liebherr customer service or your authorized dealer. When contacting support, have your model number (GNP 2476-20) and serial number ready, which can be found on the rating plate inside the appliance.

For further assistance, you may visit the official Liebherr webсайт: home.liebherr.com