Permatex 81158 Black Silicone Adhesive Sealant Instruction Manual

1. Продукт бүтүп калдыview

The Permatex 81158 Black Silicone Adhesive Sealant is a versatile, general-purpose RTV (Room Temperature Vulcanizing) sealant designed for both indoor and outdoor applications. It effectively bonds, repairs, seals, mends, and secures various materials, providing a durable and flexible seal.

Негизги өзгөчөлүктөрү:

• Professional Formula: Sensor-safe, general-purpose black RTV sealant.
• Көп максаттуу: Seals, bonds, repairs, mends, and secures glass, metal, plastics, fabric, vinyl, weather stripping, and vinyl tops.
• Аба ырайына туруктуу: Waterproof and flexible; resists water, weather, vibration, oil, and grease.
• Температура диапазону: Effective from -75°F to 450°F (-59°C to 232°C).
• Электрдик коргоо: Can be used to protect and repair electrical wiring.

This sealant is ideal for applications such as door frames, electrical connections, seams and roofs, vinyl tops, and weather stripping. It is not recommended for engine gasket applications.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Direct contact with uncured sealant may irritate eyes and skin. Avoid contact with skin or eyes. Use with adequate ventilation. Read carefully all cautions on the back panel before use. This product may contain chemicals known to cause cancer.

Биринчи жардам:

• Көз менен байланыш: Flush with water for 15 minutes. Seek medical attention if irritation persists.
• Тери менен байланыш: Самын жана суу менен жакшылап жууп салыңыз.
• Ингаляция: Move to fresh air. If symptoms persist, seek medical attention.

Балдар жетпеген жерде сактаъыз.

3. Орнотуу жана даярдоо

1. Бетти даярдоо: Ensure all surfaces to be bonded or sealed are clean, dry, and free from oil, stains, and old adhesive layers. Use a scraper or appropriate cleaning agent if necessary.
2. Open the Tube: Unscrew the cap. The tube may have a sealed opening that needs to be punctured.
3. Prepare Nozzle: Cut the nozzle to achieve the desired bead size for your application. A smaller cut will produce a finer bead, while a larger cut will produce a thicker bead.

4. Operating (Application)

1. Герметикти колдонуу: Apply a continuous and even bead of sealant directly onto one of the joint surfaces. The coating thickness should be appropriate for the gap being filled.
2. Кургатууга уруксат: Let the applied sealant stand for 8-12 minutes to allow the surface to begin drying.
3. Бөлүктөрдү чогултуу: While the sealant is still tacky, assemble the parts.
4. Fasten Connection: When tightening fasteners, apply uniform and appropriate force. Ensure the sealing surface is not moved during tightening to maintain an effective seal.

5. Curing and Maintenance

1. Толук айыктыруу убактысы: Allow the adhesive layer to fully cure for 24 hours before using the vehicle or applying stress to the sealed joint.
2. Cleaning Excess Sealant: Excess uncured sealant can be wiped away with a cloth. Once cured, excess sealant can be trimmed with a sharp knife.
3. Соплолорду тейлөө: To reuse the applicator nozzle, clean any remaining sealant from the nozzle using hot water. Silicone becomes more liquidy with hot water, making it easier to wash out.

6. Техникалык шарттар

7. Кепилдик жана колдоо

For information regarding product warranty, technical support, or further assistance, please visit the official Permatex webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сиз ошондой эле кайрыла аласыз Permatex Brand Store кошумча продукт маалымат жана ресурстар үчүн.