BELL 5101-1

Hubbell-Raco 5101-1 1 тешиктүү аба ырайынын таасирине туруктуу түзмөктүн капкагы колдонуучунун колдонмосу

Модели: 5101-1

1. Продукт бүтүп калдыview

The Hubbell-Raco 5101-1 is a durable, single-gang weatherproof device cover designed to protect outdoor electrical receptacles, specifically GFCI outlets, from environmental elements. Constructed from rugged metallic material with a state-of-the-art powder coat finish, it offers maximum weatherability and scratch resistance. This cover is intended for horizontal mounting and includes all necessary installation hardware and a gasket for a secure seal.

Hubbell-Raco 5101-1 1-Hole Weatherproof Device Cover in white, shown with the cover partially open, revealing the interior space for an electrical outlet.

This image displays the white Hubbell-Raco 5101-1 weatherproof device cover. The cover is designed for a single-gang electrical outlet and features a hinged lid that opens to protect the receptacle from weather elements. The 'BELL' brand logo is embossed on the lid. The cover is shown with the lid slightly ajar, providing a view of the robust construction and the opening for the GFCI receptacle.

2. Коопсуздук маалыматы

Always prioritize safety when working with electrical components. Failure to follow these instructions can result in electric shock, fire, or serious injury.

  • КОРКУНУЧ: Turn off power at the circuit breaker or fuse box before installing or servicing this device. Verify power is off using a voltage сыноочу.
  • This product is designed for use with 120-volt electrical systems.
  • Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
  • Do not modify the device cover in any way.
  • Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу электрик менен кеңешиңиз.
  • Keep children away from electrical outlets and installations.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

  • 1 x Hubbell-Raco 5101-1 Weatherproof Device Cover (White)
  • Орнотуу жабдыктары (бурамалар)
  • Прокладка
  • Көп тилдүү инструкциялар

4. Орнотуу жана орнотуу

4.1 Керектүү куралдар

  • Screwdriver (монтаждоо бурамалар үчүн ылайыктуу түрү)
  • Тtage Tester
  • Pencil (optional, for marking)
  • Бургулоо (эгер жаңы монтаждык тешиктер керек болсо)
  • Silicone sealant (optional, for enhanced weatherproofing)

4.2 Орнотуу кадамдары

  1. Кубатты өчүрүү: Locate the circuit breaker or fuse controlling the outdoor outlet. Turn it OFF. Use a voltage tester to confirm that power is completely disconnected at the outlet.
  2. Бар болгон капкакты алып салыңыз (эгер бар болсо): Carefully remove any existing outlet cover and discard it.
  3. Бетти даярдоо: Ensure the mounting surface around the electrical box is clean, dry, and free of debris.
  4. Position Gasket: Place the provided gasket over the electrical box opening, ensuring it aligns correctly with the outlet and mounting holes.
  5. Mount Cover: Align the Hubbell-Raco 5101-1 weatherproof device cover over the gasket and the electrical outlet. Ensure the cover is oriented for horizontal mounting.
  6. Коопсуз капкак: Insert the provided installation screws through the cover and gasket into the electrical box. Tighten the screws firmly but do not overtighten, as this can damage the cover or the electrical box.
  7. Сыноо мөөрү: Gently press around the edges of the cover to ensure the gasket creates a tight seal against the mounting surface. For added protection, a bead of silicone sealant can be applied along the top and sides of the cover where it meets the wall, leaving the bottom open for drainage.
  8. Күчтү калыбына келтирүү: Once the cover is securely installed, return to the circuit breaker or fuse box and turn the power ON.
  9. Ишти текшерүү: Test the GFCI outlet to ensure it functions correctly.

5. Иштөө нускамалары

The Hubbell-Raco 5101-1 weatherproof device cover is designed for simple operation:

  • Accessing the Outlet: To access the electrical outlet, gently lift the hinged lid of the cover. The lid will open to allow insertion of a plug.
  • Мукабаны жабуу: After use, firmly close the hinged lid until it clicks into place. This ensures the outlet is protected from moisture, dust, and debris. The strong spring mechanism helps keep the cover securely closed.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and effectiveness of your weatherproof device cover:

  • Тазалоо: Periodically wipe the cover with a damp cloth to remove dirt and grime. Avoid abrasive cleaners that could damage the powder coat finish.
  • Текшерүү: Annually inspect the cover for any signs of damage, cracks, or wear. Check the integrity of the gasket seal. If the gasket appears brittle or damaged, it should be replaced to maintain weatherproofing.
  • Hinge Check: Ensure the hinge operates smoothly and the lid closes securely. The robust metallic construction and powder coat finish are designed to resist scratching and maintain weatherability.

7. Кыйынчылыктарды

Жалпы маселелер жана аларды чечүү үчүн төмөнкү таблицага кайрылыңыз:

МаселеМүмкүн себепЧечим
Cover does not close completely or securely.Obstruction, misaligned installation, damaged hinge/spring.Check for debris or wires preventing closure. Re-align the cover during installation. Inspect hinge and spring for damage; replace if necessary.
Water or moisture inside the cover.Gasket not sealing properly, improper installation, missing silicone seal.Ensure gasket is correctly positioned and not damaged. Re-tighten mounting screws. Apply a bead of silicone sealant along the top and sides of the cover, leaving the bottom open for drainage.
Cover appears loose on the wall.Бош монтаждоо бурамалар.Carefully tighten the mounting screws. Do not overtighten.

8. Техникалык шарттар

АтрибутДеталь
Модель номери5101-1
БрендBELL (Hubbell-Raco)
МатериалМеталл
ТүсАк
Продукциянын өлчөмдөрү (W x H)2.94" x 4.94"
Аяктоо түрүPowder капталган
КонфигурацияSingle Gang
Орнотуу түрүSingle Hole, Horizontal Mount
Тtage120 вольт
Элемент Салмагы2.92 унция
ӨзгөчөлүктөрScratch resistant, weatherproof
UPC050169510117

9. Кепилдик маалыматы

The Hubbell-Raco 5101-1 Weatherproof Device Cover comes with a 1 жылдык кепилдик from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact customer support.

10. Колдоо

For further assistance, technical support, or to inquire about replacement parts, please contact Hubbell-Raco customer service. You may also visit the official BELL store on Amazon for more product information and resources:

Visit the BELL Store

Тектеш документтер - 5101-1

Preview Bell 505 эскертүү кызматынын бюллетени 505-18-10: Күйүүчү майга болгон чектөөнүн өзгөрүшү
Jet B жана JP-4 күйүүчү майлары үчүн учуу боюнча колдонмонун чектөөлөрүнүн өзгөрүшү, анын ичинде жаңыртылган бийиктик жана температура чектөөлөрү жөнүндө Bell 505 Alert Service Bulletin 505-18-10.
Preview Bell Powertron Flood Light орнотуу нускамалары
Bell Powertron Flood Lights (600W, 1200W, 1800W) үчүн толук орнотуу колдонмосу. Кесиптик орнотуу үчүн физикалык өлчөмдөрдү, зымдарды схемаларды, коопсуздук чараларын, орнотуу параметрлерин жана электрдик мүнөздөмөлөрдү камтыйт.
Preview Bell 412EPI/EPX Helicopter CHSP Knob Insert Replacement Instructions
Official Service Bulletin from Astronautics Corporation of America and Bell providing detailed instructions for replacing Course Heading Select Panel (CHSP) knob inserts on Bell 412EPI/EPX helicopters due to decal wear and chipping.
Preview Bell Arella 400 USB кайра заряддоого болгон куйрук жарыгы, жаркылдаган бурулуу сигналы - Колдонуучунун колдонмосу
Bell Arella 400 үчүн колдонуучу колдонмосу, USB кайра заряддоого боло турган велосипеддин арткы жарыгы, жаркылдаган бурулуш сигналдары бар. Орнотуу, иштетүү, кубаттоо, батареяны алмаштыруу жана FCC ылайыктуулугу тууралуу маалыматты камтыйт.
Preview Bell 429 тик учагы ACA курсунун багыты, учуу директорунун туткасын алмаштыруу боюнча нускамалар
Бул документте Bell Model 429 тик учактарындагы Course Heading Flight Director (CHFD) панелинин туткаларын алмаштыруу боюнча көрсөтмөлөр берилген. Анда керектүү материалдар, алып салуу жол-жоболору жана стикердин эскиришинен жана сынып калуусунан жабыркаган туткалардын орнотуу кадамдары жөнүндө маалымат камтылган.
Preview Bell 230 Maintenance Manual Volume 1: General Information
Comprehensive general information for the Bell 230 helicopter, Volume 1 of the Maintenance Manual. Covers essential procedures, inspection schedules, customer support, and revision details for maintaining airworthiness.