Introduction
The BELL 5146-5 Weatherproof Device Cover is designed to provide robust protection for outdoor electrical receptacles. This single-gang cover features a durable metal construction with a state-of-the-art powder-coated finish, ensuring maximum weatherability and resistance to scratches. It is specifically engineered for vertical mounting over duplex receptacles, offering reliable NEMA 3R rated protection against environmental elements.
Сүрөт: алдыңкы view of the BELL 5146-5 Weatherproof Device Cover in gray, showing the self-closing lid and the "BELL" branding. This cover is designed for wet locations.
Коопсуздук маалыматы
Please read and understand all safety information before installation and use. Failure to follow these instructions may result in electric shock, fire, or property damage.
- Электр коопсуздугу: This device cover is intended for use with 120-volt electrical systems. Ensure power is disconnected at the circuit breaker before beginning any installation work.
- Квалификациялуу кадрларды: Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring practices and local electrical codes.
- Сунуш 65 Эскертүү: Бул продукт сизди Калифорния штатында рак жана тубаса кемтиктер же башка репродуктивдик зыян келтирүүчү химиялык заттарга дуушар кылышы мүмкүн. Көбүрөөк маалымат алуу үчүн, төмөнкү дарекке өтүңүз www.P65Warnings.ca.gov.
- Колдонуу максаты: Use this cover only for its intended purpose of protecting outdoor duplex receptacles. Do not modify the product.
- Тастыктоо: This product is CSA Certified and UL Listed, ensuring it meets recognized safety standards.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- BELL 5146-5 Weatherproof Device Cover (1 unit)
- Орнотуу жабдыктары (бурамалар)
- Gasket (for weatherproof seal)
- Multi-Lingual Instructions
Орнотуу жана орнотуу
Follow these steps for proper installation of your weatherproof device cover:
- Кубатты өчүрүү: Before starting, turn off the power to the electrical outlet at the main circuit breaker or fuse box. Verify that the power is off using a voltage сыноочу.
- Бар болгон капкакты алып салыңыз (эгер бар болсо): Carefully remove any existing cover plate from the duplex receptacle.
- Бетти даярдоо: Ensure the mounting surface is clean, dry, and flat to allow for a proper seal.
- Прокладканы жайгаштырыңыз: Place the provided gasket over the electrical box opening. The gasket helps create a watertight seal between the cover and the mounting surface.
- Mount the Cover: Align the BELL 5146-5 device cover over the duplex receptacle and the gasket. The cover is designed for vertical mounting. Use the included installation hardware (screws) to securely fasten the cover to the electrical box. Do not overtighten the screws, as this can damage the cover or the electrical box.
- Сыноо операциясы: Once installed, ensure the self-closing lid operates smoothly and fully closes to provide weatherproof protection.
- Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.
Image: A hand holding the BELL 5146-5 Weatherproof Device Cover, illustrating its approximate dimensions for installation reference.
Иштөө нускамалары
The BELL 5146-5 Weatherproof Device Cover is designed for simple and effective operation:
- Accessing Receptacle: To use the electrical receptacle, simply lift the self-closing lid.
- Weatherproof Protection: When not in use, ensure the lid is fully closed. The self-closing mechanism is designed to automatically return the lid to the closed position, maintaining the NEMA 3R weatherproof seal and protecting the outlet from rain, snow, and debris.
Техникалык тейлөө
The BELL 5146-5 Weatherproof Device Cover requires minimal maintenance due to its durable construction and powder-coated finish.
- Тазалоо: Капкагын мезгил-мезгили менен жарнама менен сүртүп туруңузamp cloth to remove dirt or dust. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Текшерүү: Regularly inspect the cover and gasket for any signs of wear, cracks, or damage. Ensure the lid still closes securely. If any damage is observed, replace the cover to maintain weatherproof integrity.
Проблемаларды чечүү
Most issues with the device cover are related to installation or physical damage.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Капкак толугу менен жабылбайт. | Obstruction, damaged hinge, or improper installation. | Check for debris around the hinge. Inspect the hinge for damage. Re-check installation to ensure the cover is not warped or misaligned. |
| Капкактын ичиндеги суу. | Damaged or improperly seated gasket, or lid not fully closed. | Ensure the gasket is properly seated and not damaged. Verify the lid closes completely. Replace gasket or cover if necessary. |
| Орнотулгандан кийин капкак бошоп калгандай сезилет. | Mounting screws are not tightened sufficiently. | Бекитүүчү бурамаларды этияттык менен бекемдеңиз. Өтө катуу тартпаңыз. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | BELL |
| Модель номери | 5146-5 |
| Материал | Металл |
| Түс | Боз |
| Продукциянын өлчөмдөрү (W x H) | 2.94"W x 4.94"H |
| Өлчөмү (L x W) | 4-9/16"L x 2-13/16"W |
| Элемент Салмагы | 3.87 унция |
| Аяктоо түрү | Powder капталган |
| Орнотуу түрү | Screw-In |
| Монтаждоо | Вертикалдуу |
| NEMA рейтинги | 3R |
| Сертификаттар | CSA Certified, UL Listed |
| Тtage | 120 вольт |
| UPC | 050169514658 |
Кепилдик жана колдоо
Specific warranty details for the BELL 5146-5 Weatherproof Device Cover are typically provided with the product packaging or can be obtained by contacting the manufacturer directly. For product support, technical assistance, or warranty claims, please contact BELL customer service.
Manufacturer: Hubbell
For further information, you may visit the official BELL store on Amazon: BELL дүкөнү
