Introduction
The Mastech MS6450 Ultrasonic Distance Estimator is a precision instrument designed for quick and accurate measurement of length, area, and volume. Utilizing ultrasonic technology with a laser pointer for targeting, this device is ideal for indoor applications, providing efficient measurements for various tasks.
Продукт бүттүview
Figure 1: Mastech MS6450 Front Panel. This image displays the front of the Mastech MS6450 Ultrasonic Distance Estimator. Key features visible include the LCD screen showing "0.70m", the "MASTECH" brand logo, and various control buttons. At the top, a warning symbol indicates "Laser & Sensor exposure" and the "CE" mark. The model number "MS6450" is also visible. Below the screen, buttons are arranged for functions such as "LIGHT", "READ", "MEM INPUT", "MEM RECALL", "FT/M", and calculation buttons for area, volume, and addition/subtraction. The phrase "Measure From Base" is printed at the bottom.
Негизги компоненттер:
- LCD дисплей: Shows measurement readings, units, and calculation results.
- Laser & Sensor Aperture: Located at the top, emits the laser for targeting and the ultrasonic sensor for measurement.
- ЖАРЫК баскычы: Жарык аз шарттарда көрүнүүнү жакшыртуу үчүн дисплейдин арткы жарыгын иштетет.
- ОКУ баскычы: Өлчөөнү баштайт.
- MEM INPUT Button: Stores the current measurement into memory.
- MEM RECALL Button: Recalls stored measurements from memory.
- FT/M Button: Фут жана метр өлчөө бирдиктеринин ортосунда которулат.
- Area Calculation Button (L x W icon): Used for calculating area.
- Volume Calculation Button (H x L x W icon): Used for calculating volume.
- +/- баскычы: Used for addition or subtraction of measurements.
- Батарея бөлүмү: Located on the rear (not visible in image), houses the 9V battery.
Жайгашуу
Батарея орнотуу:
- Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
- Капкактын үстүнкү бөлүгүн ачуу үчүн аны жылдырыңыз же алып салыңыз.
- Insert one 9V (6F22) alkaline battery, ensuring correct polarity (+/-).
- Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.
Эскертүү: A fresh 9V alkaline battery provides approximately 10 hours of continuous dynamic measurement.
Күйгүзүү:
Press any button to power on the device. The LCD display will illuminate.
Иштөө нускамалары
Өлчөө жүргүзүү:
- Түзмөк күйгүзүлгөнүн текшериңиз.
- Point the laser target to the desired measurement point. The device measures from its base.
- басыңыз ОКУ button. The measurement will be displayed on the LCD screen.
- For optimal accuracy, ensure the measurement path is clear and the target surface is flat and perpendicular to the device.
Changing Units (Feet/Meters):
басыңыз FT/M button to toggle between feet and meters. The display will indicate the current unit.
Calculating Area:
- Take the first measurement (e.g., length) and press the MEM INPUT баскычы.
- Take the second measurement (e.g., width) and press the MEM INPUT кайра баскычын.
- басыңыз Area Calculation Button (L x W icon). The calculated area will be displayed.
Calculating Volume:
- Take the first measurement (e.g., length) and press the MEM INPUT баскычы.
- Take the second measurement (e.g., width) and press the MEM INPUT баскычы.
- Take the third measurement (e.g., height) and press the MEM INPUT баскычы.
- басыңыз Volume Calculation Button (H x L x W icon). The calculated volume will be displayed.
Эстутум функциялары:
- MEM INPUT: Stores the current measurement. Can be used sequentially for area/volume calculations.
- MEM RECALL: Recalls previously stored measurements.
Арткы жарык:
басыңыз ЖАРЫК button to turn the LCD backlight on or off.
Маанилүү операциялык эскертүүлөр:
- The recommended operating environment is indoors.
- Accuracy is stated as 0.5% ± 1 digit. Factors such as surface texture, angle, and environmental conditions can affect accuracy.
- The device measures from its base. Ensure this is accounted for in your measurements.
Техникалык тейлөө
Тазалоо:
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the laser and sensor apertures clean and free of dust.
Батареяны алмаштыруу:
When the battery indicator on the display shows low power, replace the 9V battery as described in the "Setup" section. Remove the battery if the device will not be used for an extended period to prevent leakage.
Сактагыч:
Аппаратты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. | Өлүк же туура эмес орнотулган батарея. | Check battery polarity or replace with a fresh 9V battery. |
| Туура эмес өлчөө. |
|
|
| Unit switches to metric unexpectedly. | Possible accidental button press or internal setting. | басыңыз FT/M button to switch back to the desired unit. |
| Дисплей күңүрт же бүлбүлдөп турат. | Батарея аз. | 9V батарейканы алмаштырыңыз. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Өлчөө диапазону | 0.6 – 15 м (2 – 50 фут) |
| Тактык | 0.5% ± 1 Digit |
| Резолюция | 0.01M (1 Feet) |
| Сунушталган иштөө чөйрөсү | Үй ичинде |
| Aperture Angle | Болжол менен 5 градус |
| Laser Diode Type | Red Laser Diode 650nm |
| Электр камсыздоо | 6F22 9V Батарея |
| Батареянын иштөө мөөнөтү | 10 hours (continuous dynamic measurement) |
| Calculation Range (Length) | 9999 м |
| Calculation Range (Area) | 99999 м² |
| Calculation Range (Volume) | 99999 м³ |
| Элементтин өлчөмү | 14 x 5.7 x 3.8 см |
| Элемент Салмагы | 120 г |
| Түс | Сары |
| Сууга туруктуулук деңгээли | Сууга чыдамдуу |
Кепилдик маалымат
Specific warranty details for the Mastech MS6450 Ultrasonic Distance Estimator are provided by the manufacturer. Please refer to the warranty card included with your product or contact Mastech directly for comprehensive warranty terms and conditions.
Кардарларды колдоо
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Mastech customer support. Contact information can typically be found on the manufacturer's official webсайтында же продуктунун таңгагында.
