ICY BOX IB-168SK-B Тышкы 3.5 дюймдук SATA катуу дискти тез алмаштыруучу корпус колдонуучунун колдонмосу

1. Киришүү

This manual provides instructions for the installation, operation, and maintenance of the ICY BOX IB-168SK-B external 3.5-inch SATA hard drive quick swap enclosure. This device is designed for convenient and rapid exchange of 3.5-inch SATA hard drives, offering a robust and efficient solution for data management.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Quick and tool-free hard drive installation and removal.
• Compatibility with all 3.5-inch SATA hard drives.
• Integrated rubber padding to reduce vibrations and noise.
• Support for hot-swapping functionality.
• NSS (No-Scratch SATA) mechanism designed for over 50,000 hard drive changes.
• PC compatibility.

2. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 1x ICY BOX IB-168SK-B External 3.5-inch SATA Hard Drive Enclosure
• 1x Set of keys for the lock mechanism
• 1x SATA data cable (typically included)
• 1x SATA power cable (typically included)
• 1x Колдонуучунун колдонмосу (бул документ)

3. Орнотуу нускамалары

3.1 Installing the Enclosure into a PC Bay

The IB-168SK-B is designed to fit into a standard 5.25-inch drive bay in your computer case.

1. Компьютериңизди даярдаңыз: Power off your computer and disconnect all cables. Open the computer case to access the internal drive bays.
2. Locate a 5.25-inch bay: Identify an available 5.25-inch drive bay. Remove any front panel covers or brackets if necessary.
3. Корпусту киргизиңиз: Carefully slide the IB-168SK-B enclosure into the chosen 5.25-inch bay from the front of the case until it is flush with the front panel.
4. Корпусту бекитиңиз: Use screws to secure the enclosure to the drive bay on both sides. Ensure it is firmly in place to prevent movement.
5. Кабелдерди туташтыруу: Connect a SATA data cable from the enclosure's rear SATA port to an available SATA port on your motherboard. Connect a SATA power cable from your power supply unit to the enclosure's rear SATA power port.

Сүрөт: Арткы view of the enclosure, illustrating the SATA data and power connections.

3.2 Installing a 3.5-inch SATA Hard Drive

The enclosure features a quick-swap mechanism for easy hard drive installation.

1. Unlock the front panel: Use the provided key to unlock the front panel of the enclosure. Turn the key to the unlock position and open the front door.
2. Insert the hard drive: Gently slide your 3.5-inch SATA hard drive into the open bay. Ensure the SATA connectors on the hard drive align with the connectors inside the enclosure. Push firmly until the hard drive is fully seated and clicks into place.
3. Close and lock: Close the front door of the enclosure. Turn the key to the lock position to secure the hard drive. This also ensures proper electrical contact and prevents accidental removal.

Image: A 3.5-inch hard drive being inserted into the enclosure.

Сүрөт: алдыңкы view of the enclosure with the hard drive bay closed and locked.

4. Иштөө нускамалары

4.1 Powering On and Drive Recognition

After installing the hard drive and securing the enclosure, power on your computer. The operating system should detect the newly installed hard drive. If it's a new drive, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.

4.2 Hot-Swapping Hard Drives

The IB-168SK-B supports hot-swapping, allowing you to remove and insert hard drives while the computer is running. To perform a hot-swap:

1. Safely Eject (if applicable): Before removing a drive, ensure all data transfers are complete and safely eject the drive through your operating system's "Safely Remove Hardware" or "Eject" function.
2. Кулпуну ачуу жана ачуу: Use the key to unlock the front panel and open the door.
3. Remove Drive: Gently pull the hard drive out of the bay.
4. Жаңы дискти киргизүү: Slide the new 3.5-inch SATA hard drive into the bay, ensuring proper alignment.
5. Жабуу жана кулпулоо: Close the front door and lock it with the key. The operating system should detect the new drive.

Маанилүү: Always ensure the drive is not actively being accessed before removing it to prevent data loss or corruption.

5. Техникалык тейлөө

• Тазалоо: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid liquid cleaners or abrasive materials.
• Вентиляция: Ensure the ventilation slots on the front panel are not obstructed to allow for proper airflow and cooling of the hard drive.
• Негизги башкаруу: Keep the provided keys in a safe place. The lock mechanism is crucial for securing the hard drive and enabling the quick-swap function.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

Specific warranty information for the ICY BOX IB-168SK-B is not provided within this manual. For details regarding warranty coverage, technical support, or spare parts availability, please refer to the manufacturer's official website or contact their customer service directly. The manufacturer is RaidSonic Technology.

Information regarding software updates for this product is not available.