1. Продукт бүтүп калдыview
The Scotch DL961 Lamination Refill Cartridge is designed for use with compatible Scotch Heat-Free Laminating Systems, such as the LS960 and LS961 models. This cartridge provides a convenient and efficient method for protecting and preserving documents without the need for electricity or heat. It offers both front and back side lamination, making it suitable for a variety of items including presentations, 3-ring binder sheets, schedules, and frequently handled documents. The cartridge contains 90 feet of transparent laminating film and can accommodate items up to 9 inches wide.
1-сүрөт: Scotch DL961 Heat-Free Lamination Refill Cartridge. This image displays the transparent film rolls within the black cartridge frame, ready for installation into a compatible laminating system.
2. Орнотуу жана орнотуу
This section outlines the steps for installing the DL961 refill cartridge into your compatible Scotch Heat-Free Laminating System.
- Prepare the Laminating System: Ensure your Scotch Heat-Free Laminating System (e.g., LS960 or LS961) is clean and free of any debris. If an old cartridge is present, remove it according to your laminator's specific instructions.
- Жаңы картриджди таңгактан чыгарыңыз: Carefully remove the DL961 refill cartridge from its packaging. Avoid touching the adhesive surfaces of the laminating film.
- Картриджди салыңыз: Align the cartridge with the designated slots or guides in your laminating system. Gently push the cartridge into place until it clicks or seats securely. Refer to your laminating system's manual for precise alignment and locking mechanisms.
- Орнотууну текшерүү: Once installed, ensure the film rolls are properly aligned and can move freely. The system should be ready for use.
3. Иштөө нускамалары
Using the Scotch DL961 cartridge with your heat-free laminating system is a straightforward process. Follow these steps for optimal results:
- Документиңизди даярдаңыз: Ensure the item you wish to laminate is clean, dry, and flat. Trim any excess paper if necessary. The cartridge accommodates items up to 9 inches wide.
- Position the Document: Open the laminating system's entry slot. Carefully place your document onto the lower laminating film, aligning it as straight as possible. Ensure the document is centered and does not exceed the maximum width capacity.
- Feed the Document: Gently feed the document and film into the laminating system's entry point. The system will draw the document through, applying the top and bottom laminating films simultaneously.
- Ламинацияланган нерсени алуу: Once the document has passed completely through the system, retrieve the laminated item from the exit slot.
- Кесүү (милдеттүү эмес): If desired, use scissors or a paper trimmer to trim any excess laminating film around the edges of your document, leaving a small border for a secure seal.
2-сүрөт: Example of laminated tags used for organization. The heat-free lamination provides a durable, clear finish suitable for frequently handled items like labels for storage baskets.
3-сүрөт: Laminated recipe cards for preservation. Lamination protects important documents and memories from spills and wear.
4-сүрөт: Laminated confetti used in a creative project. The clear film allows for creation of durable and decorative items.
4. Техникалык тейлөө
Proper maintenance of your laminating system and the DL961 cartridge ensures consistent performance and longevity.
- Системаны тазалоо: Regularly inspect the laminating system's rollers and entry/exit slots for dust, paper fibers, or adhesive residue. Use a soft, dry cloth to gently wipe surfaces. Do not use abrasive cleaners or solvents.
- Картридж сактоо: Store unused DL961 cartridges in their original packaging in a cool, dry place away from direct sunlight and extreme temperatures. This helps preserve the adhesive quality of the film.
- Тасманы иштетүү: Avoid touching the laminating film directly with your fingers, as oils and dirt can affect the clarity and adhesion.
5. Кыйынчылыктарды
If you encounter issues while using your Scotch DL961 Lamination Refill Cartridge, consider the following common solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Laminated item is cloudy or has bubbles. | Dust or debris on the document/film; improper feeding; uneven pressure. | Ensure documents are clean before laminating. Feed documents slowly and straight. Check laminator rollers for debris and clean if necessary. |
| Film does not seal properly. | Cartridge not installed correctly; film misaligned; document too thick. | Re-install the cartridge, ensuring it is seated firmly. Verify film alignment. Ensure document thickness is within the laminator's specifications. |
| Cartridge is stuck or not feeding. | Obstruction in the laminator; cartridge misalignment. | Carefully inspect the laminator's path for any obstructions. Remove and re-insert the cartridge, ensuring proper alignment. Do not force the cartridge. |
6. Техникалык шарттар
Key specifications for the Scotch DL961 Heat-Free Lamination Refill Cartridge:
- Модель номери: DL961
- Бренд: Scotch
- Өндүрүүчү: 3M
- Продукт түрү: Heat-Free Lamination Refill Cartridge
- Бири-бирине шайкеш системасы: Scotch Heat-Free Laminating Systems LS960, LS961
- Ламинация түрү: Алдыңкы жана арткы
- Film Length: 90 фут
- Maximum Item Width: 9 дюймга чейин
- Түсү: Ачык
- Элемент Салмагы: Болжол менен 2.54 фунт
- Продукциянын өлчөмдөрү: 6.25 x 3 x 11.5 inches (Cartridge)
- Биринчи жеткиликтүү болгон күнү: 4-октябрь, 2006-жыл
7. Кепилдик жана колдоо
For information regarding warranty coverage, product support, or to contact customer service for your Scotch DL961 Lamination Refill Cartridge, please refer to the official Scotch website or the documentation included with your laminating system. Specific warranty terms and conditions may vary.
кире аласыз Scotch Brand Store on Amazon кошумча продукт маалымат жана ресурстар үчүн.
