Сызыктуу 420001

Сызыктуу көп коддуу клавиатура өткөргүчү 420001 колдонуучу колдонмосу

Модель: 420001

Introduction

This manual provides instructions for the installation, operation, and maintenance of the Linear Multi-Code Keypad Transmitter, model 420001. This wireless keypad is designed for use with Multi-Code Receivers to control access to garage doors or gates.

Продукт бүттүview

The Linear Multi-Code Keypad Transmitter 420001 is a 12-button alphanumeric keypad. It operates on a 300 MHz frequency and features 10 dip switches for programming. Its weatherproof casing ensures durability for outdoor use.

Linear Multi-Code Keypad Transmitter 420001

Сүрөт: алдыңкы view of the Linear Multi-Code Keypad Transmitter 420001, showing the 12-button alphanumeric keypad and the "MULTI-CODE" branding at the top.

Орнотуу жана орнотуу

  1. Батарея орнотуу

    The keypad requires one 9V alkaline battery (not included). To install:

    • Open the keypad casing.
    • 9V батарейканы батарейканын клипине туташтырыңыз.
    • Place the battery securely within the compartment.
    • Close the keypad casing, ensuring it is sealed properly for weather resistance.
  2. Монтаждоо

    The keypad is designed for screw-in installation and mounts with two screws.

    • Choose a suitable location for mounting, ensuring it is within range of your Multi-Code Receiver.
    • Mark the positions for the two mounting screws.
    • Зарыл болсо, пилоттук тешиктерди бургула.
    • Secure the keypad to the surface using appropriate screws.
  3. Баскычтопту программалоо

    This keypad uses 10 dip switches for programming. The code is entered directly through the keypad, eliminating the need to manually adjust physical dip switches on the unit itself.

    1. Locate the dip switch settings on your Multi-Code Receiver or existing remote. This will be a sequence of 10 switches, each set to ON, OFF, or MIDDLE (if applicable).
    2. On the 420001 keypad, enter the 10-digit code corresponding to your receiver's dip switch settings. Refer to the keypad's internal instructions for specific key presses to represent ON, OFF, or MIDDLE positions.
    3. Press the "ACCESS" button to save the code.
    4. Test the keypad to ensure it operates your garage door or gate opener.

    Эскертүү: Programming typically takes less than 2 minutes. Ensure the keypad is within operational range of the receiver during testing.

Иштөө нускамалары

To operate your garage door or gate using the Linear Multi-Code Keypad Transmitter:

  1. Enter your programmed 10-digit access code using the alphanumeric buttons.
  2. Press the "ACCESS" button.
  3. The LED indicator will illuminate, and your Multi-Code Receiver should activate, opening or closing your garage door or gate.

If the door or gate does not respond, verify your code and ensure the keypad is within effective range of the receiver.

Техникалык тейлөө

  • Батареяны алмаштыруу: When the keypad's performance degrades or the LED indicator fails to light, replace the 9V battery. Follow the battery installation steps.
  • Тазалоо: Clean the keypad's exterior with a soft, damp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
  • Аба ырайынын туруктуулугу: The keypad features a weatherproof casing. Ensure the casing is properly closed and sealed after any internal access (e.g., battery replacement) to maintain its weather-resistant properties.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Keypad does not respond or works intermittently.
  • Батарея аз же өлүк.
  • Туура эмес кирүү коду киргизилди.
  • Keypad out of range of receiver.
  • Интерференция же алсыз сигнал.
  • 9V батарейканы алмаштырыңыз.
  • Re-enter the correct 10-digit access code.
  • Ensure keypad is within effective operating range (typically 15 feet from the unit).
  • If signal is weak, consider repositioning the keypad or checking the receiver's antenna.
LED индикатору күйбөйт.Өлүк же туура эмес орнотулган батарея.Check battery connection or replace the 9V battery.
Keypad does not program correctly.Incorrect dip switch settings entered.Double-check the 10 dip switch settings from your receiver and re-enter the code carefully.

Техникалык шарттар

Модель номери420001
БрендСызыктуу
Жыштык300 МГц
Number of Dip Switches10
Power Source1 x 9V щелочтуу батарея (кошулбаган)
Орнотуу түрүScrew-In
Продукциянын өлчөмдөрү6.75 x 1.5 x 3 дюйм
Элемент Салмагы4 унция
МатериалПластик
ТүсБеж
ШайкештикFCC

Кепилдик жана колдоо

Кепилдик маалыматы же техникалык колдоо үчүн өндүрүүчүнүн расмий өкүлүнө кайрылыңыз webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

Өндүрүүчү: Сызыктуу

Тектеш документтер - 420001

Preview Сызыктуу NMTK MegaCode зымсыз баскычтоп орнотуу жана программалоо нускамалары
Linear NMTK MegaCode зымсыз баскычтопту орнотуу, программалоо жана иштетүү боюнча толук нускамалар, анын ичинде функциялар, батареяны алмаштыруу, дубалга орнотуу жана кепилдик маалыматы.
Preview LINEAR DNT00094 NMTK зымсыз баскычтоп орнотуу жана программалоо боюнча колдонмо
Гараждын эшиги жана дарбазасы операторлору үчүн LINEAR DNT00094 NMTK зымсыз баскычтопту орнотуу жана программалоо боюнча комплекстүү колдонмо, функцияларды, иштөөнү, батареяны алмаштырууну жана кепилдикти камтыйт.
Preview Сызыктуу LDCO801 DC мотору гараждын эшигин ачкыч: Үй ээсинин нускамалары жана тейлөө боюнча колдонмо
Сызыктуу LDCO801 DC мотору гараждын эшигин ачуучу үчүн комплекстүү үй ээсинин көрсөтмөлөрү. Иштетүүнү, алыстан башкарууну орнотууну, тейлөөнү, коопсуздукту текшерүүнү, бузулууларды аныктоону жана кепилдик маалыматын камтыйт.
Preview Сызыктуу LDCO801 DC мотору гараждын эшигин ачкыч Үй ээсинин көрсөтмөлөрү
Сызыктуу LDCO801 DC Motor Garage Door Opener үчүн комплекстүү үй ээсинин көрсөтмөлөрү, орнотууну, эксплуатациялоону, коопсуздукту, техникалык тейлөөнү жана көйгөйлөрдү чечүүнү камтыйт. Гараждын эшигин ачкычыңызды кантип коопсуз иштетүү, тейлөө жана көйгөйлөрдү чечүү жолдорун үйрөнүңүз.
Preview Сызыктуу MCT-1/MCT-2 MegaCode санариптик өткөргүчтөрү: Иштөө боюнча нускамалар жана программалоо боюнча колдонмо
Linear MCT-1 жана MCT-2 MegaCode санарип өткөргүчтөрүн колдонуу боюнча нускамалар. Бул коопсуз зымсыз гараж жана дарбаза пульттарынын функциялары, программалоосу, батареяны алмаштыруу, кепилдик жана маанилүү FCC маалыматы жөнүндө билип алыңыз.
Preview Сызыктуу зымсыз киргизүү системалары: баскычтоптор жана контроллерлер
Linear компаниясынын MDKP баскычтопторун, AP-5 контроллерлерин жана турак жай, коммерциялык жана өнөр жайлык колдонмолордо коопсуз кирүүнү башкаруу үчүн ар кандай AK сериясындагы баскычтопторун камтыган зымсыз кирүү системаларынын түрлөрүн изилдеңиз.