DeVilbiss 802342 StartingLine HVLP Gravity Spray Gun Kit User Manual

Introduction

The DeVilbiss 802342 StartingLine HVLP Gravity Spray Gun Kit is a comprehensive system designed for auto painting and touch-up applications. This kit includes a full-size HVLP spray gun with a 1.3mm fluid tip, a mini HVLP detail gun with a 1.0mm fluid tip, an air adjusting valve, and a 1.8mm primer set-up. All components are conveniently organized within a durable molded case, providing a complete solution for various painting needs.

Коопсуздук маалыматы

Always prioritize safety when operating spray painting equipment. Failure to follow safety guidelines can result in serious injury or property damage.

• Вентиляция: Use in a well-ventilated area to prevent the accumulation of hazardous fumes. If adequate ventilation is not available, use appropriate respiratory protection.
• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate PPE, including safety glasses or goggles, gloves, and a respirator suitable for paint fumes.
• Күйүүчү материалдар: Many paints and solvents are flammable. Keep away from open flames, sparks, and other ignition sources. Do not smoke while operating the spray gun.
• басым коопсуздугу: Never exceed the maximum recommended air pressure for the spray gun. Always release air pressure from the system before performing maintenance or cleaning.
• Химиялык таасири: Бул продукт сизге химиялык заттардын, анын ичинде коргошундун таасирин тийгизиши мүмкүн, ал Калифорния штатына рак жана тубаса кемтик же башка репродуктивдүү зыян алып келиши белгилүү. Көбүрөөк маалымат алуу үчүн өтүңүз www.P65Warnings.ca.gov.
• Электр коопсуздугу: Ensure all electrical connections for air compressors or other equipment are properly grounded and in good condition.
• Балдар жана үй жаныбарлары: Keep children and pets away from the work area and equipment.

Продукт бүттүview жана компоненттер

The DeVilbiss 802342 kit provides a versatile set of tools for various painting tasks. Familiarize yourself with the components before use.

Figure 1: DeVilbiss 802342 StartingLine HVLP Gravity Spray Gun Kit, showing the full-size HVLP spray gun, mini HVLP detail gun, air adjusting valve, and various cleaning accessories neatly organized in a molded case.

Figure 2: Contents of the DeVilbiss StartingLine Spray Gun Kit, including two spray guns, fluid cups, and cleaning tools.

3-сүрөт: Башка view of the DeVilbiss StartingLine Spray Gun Kit components, highlighting the full-size and mini spray guns along with accessories.

Комплекттин мазмуну:

• Full-Size HVLP Gravity Spray Gun: Equipped with a 1.3mm fluid tip, suitable for general painting applications.
• Mini HVLP Detail Gun: Features a 1.0mm fluid tip, ideal for touch-ups and fine detail work.
• Air Adjusting Valve: For precise control over air pressure at the gun.
• 1.8mm Primer Set-up: An additional fluid tip and needle for spraying thicker materials like primers.
• Molded Case: Provides organized storage and protection for the kit components.
• Тазалоочу аксессуарлар: Various brushes and tools for proper maintenance.

Жайгашуу

1. Компоненттерди таңгактан чыгаруу: Carefully remove all items from the molded case and inspect for any damage.
2. Select Fluid Tip: Choose the appropriate fluid tip (1.0mm, 1.3mm, or 1.8mm) based on the viscosity of the material you intend to spray. Ensure the corresponding needle and air cap are installed.
3. Суюктук чөйчөгүн бекитүү: Securely attach the gravity-feed fluid cup to the top of the spray gun.
4. Аба менен камсыздоону туташтыруу: Connect the air adjusting valve to the spray gun's air inlet, then connect your air hose from the compressor to the air adjusting valve. Ensure all connections are tight to prevent air leaks.
5. Алгачкы тазалоо: Before first use, clean the spray gun thoroughly with an appropriate cleaning solvent to remove any manufacturing residues.

Иштөө нускамалары

1. Материалды даярдоо: Mix and thin your paint or coating material according to the manufacturer's instructions. Strain the material to remove any particles that could clog the gun.
2. Fill Fluid Cup: Pour the prepared material into the gravity-feed fluid cup. Do not overfill.
3. Абанын басымын коюңуз: With the air adjusting valve, set the air pressure at the gun to the recommended PSI for your material. For HVLP guns, this is typically between 10-30 PSI (Maximum Pressure: 30 PSI).
4. Spray үлгүсүн тууралоо:
   • Fan Control Knob: Adjust this knob to change the width of the spray pattern, from a narrow round pattern to a wide fan.
   • Fluid Control Knob: Controls the amount of material flowing through the gun. Turn clockwise to decrease flow, counter-clockwise to increase.
5. Сыноочу спрей: Always perform a test spray on a piece of scrap material to verify the spray pattern and material atomization before applying to your actual workpiece. Adjust settings as needed.
6. Чачыруу техникасы:
   • Бетинен ырааттуу аралыкты (адатта 6-8 дюйм) сактаңыз.
   • Move the gun at a steady, even speed, overlapping each pass by about 50%.
   • Trigger the gun fully at the beginning of each pass and release at the end to avoid excessive material buildup.

Техникалык тейлөө

Proper cleaning and maintenance are essential for the longevity and optimal performance of your spray guns.

1. Дароо тазалоо: Clean the spray gun immediately after each use. Do not allow paint to dry inside the gun.
2. Empty Fluid Cup: Empty any remaining material from the fluid cup.
3. Flush Gun: Pour a small amount of appropriate cleaning solvent into the cup and spray it through the gun until clear solvent emerges.
4. Бөлүктөргө бөлүп алып, тазалаңыз:
   • Remove the air cap, fluid tip, and needle.
   • Use the provided cleaning brushes and solvent to thoroughly clean all internal and external parts. Pay special attention to the air cap holes and fluid passages.
   • Do not use metal objects to clean the fluid tip or air cap holes, as this can damage them.
5. Майлоо: Lightly lubricate the needle packing and air valve packing with a non-silicone lubricant designed for spray guns.
6. Reassembly and Storage: Reassemble the gun carefully. Store the clean and dry spray gun in its molded case to protect it from dust and damage.

Проблемаларды чечүү

Бул бөлүмдө сиз туш болушуңуз мүмкүн болгон жалпы көйгөйлөр каралат жана мүмкүн болгон чечимдер сунушталат.

Техникалык шарттар

Кепилдик жана колдоо

For detailed warranty information, technical support, or to purchase replacement parts, please refer to the official DeVilbiss webсайтка же кардарларды тейлөөгө кайрылыңыз.

An official Installation Manual (PDF) is available for further reference:

• Орнотуу боюнча колдонмону түшүрүп алуу (PDF)