Electro-Harmonix Metal Muff with Top Boost Distortion Pedal User Manual

1. Киришүү

Welcome to the Electro-Harmonix Metal Muff with Top Boost Distortion Pedal user manual. This pedal is designed to deliver the ultimate metal distortion, offering a wide range of tonal possibilities for guitarists. With its powerful EQ bands and unique Top Boost feature, you can sculpt your sound precisely, from subtle grit to aggressive, high-gain distortion.

The Metal Muff is built with a tough and compact die-cast chassis, ensuring durability for both studio and live performance environments.

2. Өзгөчөлүктөрү

• Output Volume and Master Drive Controls: Allows for precise control over the pedal's output level and the overall distortion intensity.
• 3-Band EQ (Bass, Mid, Treble): Provides extensive tonal shaping capabilities, enabling users to fine-tune their sound across the frequency spectrum.
• Footswitchable Top Boost with Separate Control Knob: Engages an additional high-frequency boost for searing leads and enhanced presence, controllable via its own dedicated knob and footswitch.
• Tough and Compact Die-Cast Chassis: Ensures robust construction and durability for reliable performance.
• 9-Volt Battery Included: Ready for immediate use with a standard 9V battery.

3. Продукт бүтүп калдыview

1-сүрөт: Фронт view of the Electro-Harmonix Metal Muff with Top Boost Distortion Pedal. This image displays the pedal's black chassis with white lettering, showing the control knobs for Volume, Top Boost, Treble, Mid, Bass, and Dist. It also clearly shows the "BOOST" and "BYPASS" footswitches, along with the input and output jacks on the sides. The "METAL MUFF WITH TOP BOOST" logo is prominently featured.

4. Орнотуу

1. Электр камсыздоо: The Metal Muff can be powered by a 9V battery (included) or an optional 9V DC power adapter (center negative). To install or replace the battery, unscrew the four screws on the bottom plate of the pedal and carefully remove the plate. Connect the 9V battery to the battery clip and place it inside the pedal. Replace the bottom plate and screws.
2. Киргизүү байланышы: Гитараңызды же башка аспапты туташтырыңыз INPUT стандарттуу 1/4 дюймдук аспап кабелин колдонуу менен педалдын оң жагындагы уячага.
3. Чыгуу туташуу: туташтыруу AMP педалдын сол тарабындагы уячага ampкөтөргүчтүн киргизүүсүн башка стандарттуу 1/4 дюймдук аспап кабели аркылуу.
4. Сигнал чынжыр: For optimal performance, place the Metal Muff early in your signal chain, typically after wah pedals and before modulation or time-based effects.

5. Иштөө нускамалары

Башкаруу каражаттары:

• ҮН (Үн) баскычы: Controls the overall output volume of the Metal Muff. Turn clockwise to increase volume, counter-clockwise to decrease.
• DIST (Distortion) Knob: Adjusts the amount of distortion. Turn clockwise for more aggressive, high-gain distortion; turn counter-clockwise for less distortion.
• BASS баскычы: Controls the low-frequency response of the distortion. Use to add fullness or tighten the bass.
• MID баскычы: Controls the mid-frequency response. Adjusting this knob can significantly alter the character of the distortion, from scooped metal tones to more pronounced, cutting mids.
• TREBLE баскычы: Controls the high-frequency response. Use to add clarity and bite to your tone.
• TOP BOOST Knob: Sets the amount of high-frequency boost applied when the BOOST footswitch is engaged. This control is only active when the Top Boost is on.
• BYPASS Footswitch: Toggles the effect on and off. When the effect is active, the corresponding LED will illuminate.
• BOOST бут өчүргүч: Engages or disengages the Top Boost feature. This footswitch is only active when the main distortion effect is engaged. The corresponding LED will illuminate when Top Boost is active.

Негизги операция:

Туташкандан кийин, amplifier is on and set to a clean channel. Engage the Metal Muff by pressing the BYPASS footswitch. Adjust the DIST knob to achieve your desired level of distortion. Use the BASS, MID, and TREBLE knobs to sculpt your tone. For an additional high-frequency boost, press the BOOST footswitch and adjust the TOP BOOST knob to fine-tune the intensity of the boost.

6. Техникалык тейлөө

• Тазалоо: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• Сактагыч: Педалды күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз. Узак мөөнөткө сактасаңыз, акып кетпеш үчүн батареяны алып салыңыз.
• Батареяны алмаштыруу: As mentioned in the Setup section, replace the 9V battery when the pedal's performance degrades or the indicator LEDs dim. Always use a fresh alkaline 9V battery.
• Байланыштары: Бардык кабелдердин туташууларынын эскиргендигин жана бузулгандыгын мезгил-мезгили менен текшерип туруңуз. Домкраттар чаң жана таштандылардан тазалангандыгын текшериңиз.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

Electro-Harmonix products are designed for reliability and performance. For specific warranty information and technical support, please refer to the official Electro-Harmonix webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

For further assistance, visit the official Electro-Harmonix webсайт: www.ehx.com