1. Киришүү
The ABB S203-C32 is a three-pole miniature circuit breaker (MCB) designed for reliable protection of electrical circuits against overloads and short circuits. This device is part of the S200 series, engineered for easy installation and robust performance in various applications, including residential and commercial buildings.
It features a C-characteristic activation, meaning it trips when the overcurrent is 5 to 10 times the nominal current, making it suitable for circuits with moderate inrush currents. With a nominal current of 32 Amperes and a rated breaking capacity of 6 kA according to EN 60898-1, the S203-C32 provides essential safety for three-phase electrical systems.
1-сүрөт: Жалпы view of the ABB S203-C32 Circuit Breaker.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Electrical work should only be performed by qualified and authorized personnel. Failure to follow these instructions can result in serious injury or death.
- Always disconnect power at the main supply before installing, servicing, or removing the circuit breaker.
- тtagе жана өчүргүчтүн учурдагы рейтингдери электр тутумуңуздун талаптарына дал келет.
- Ensure proper grounding and wiring according to local electrical codes and regulations.
- Эгер автоматтык өчүргүч бузулуп калса же ашыкча күч колдонулган болсо иштетпеңиз.
- Wear appropriate personal protective equipment (PPE), such as insulated gloves and safety glasses, when working with electrical systems.
3. Орнотуу
The ABB S203-C32 circuit breaker is designed for easy installation on standard DIN rails. Its patented twin terminals with spring-loaded screws facilitate secure connection of conductors.
3.1 DIN рельсине орнотуу
- Ensure the main power supply to the distribution board is switched off and locked out.
- Align the circuit breaker with the DIN rail.
- Press the circuit breaker firmly onto the DIN rail until it clicks into place. Ensure it is securely seated.
2-сүрөт: Каптал view DIN рельсин орнотуу механизмин көрсөтүү.
3.2 Зымдарды туташтыруу
The S203-C32 features three poles for three-phase circuit protection. It is equipped with twin terminals that allow for secure wiring.
- Strip the insulation from the conductor ends to the recommended length (typically 12-14 mm).
- Insert the conductors into the appropriate terminals (input and output). The terminals are designed to accept conductors up to 35 mm² cross-section.
- Tighten the terminal screws to the specified torque (refer to product markings or technical data sheet for exact torque values, typically 2.8 Nm). Ensure connections are firm to prevent loose contacts and overheating.
- Verify all connections are secure and that no bare wires are exposed, ensuring touch protection according to IP20.
3-сүрөт: View of the wiring terminals for conductor connection.
4-сүрөт: Детальдуу view of the patented twin terminals.
4. Операция
The ABB S203-C32 circuit breaker operates automatically to protect electrical circuits. It has two primary states: ON and OFF, and an automatic trip state.
- ON позициясы: When the toggle switch is in the upward position, the circuit is closed, allowing current to flow.
- ӨЧҮРҮҮ абалы: When the toggle switch is in the downward position, the circuit is open, interrupting current flow. This position is used for manual disconnection.
- Чагылган позициясы: In the event of an overload or short circuit, the circuit breaker will automatically trip, moving the toggle switch to an intermediate or fully down position (depending on the specific mechanism). This indicates a fault in the circuit.
To reset a tripped circuit breaker, first identify and rectify the cause of the trip (e.g., remove overloaded devices or fix short circuits). Then, firmly push the toggle switch all the way down to the OFF position, and then back up to the ON position.
Сүрөт 5: Алдыңкы view displaying the toggle switch for operation.
5. Техникалык тейлөө
The ABB S203-C32 circuit breaker is designed for maintenance-free operation under normal conditions. However, periodic inspection is recommended to ensure continued reliability and safety.
- Визуалдык текшерүү: Regularly inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections. Ensure the toggle switch moves freely.
- Тазалоо: Зарыл болсо, автоматтык өчүргүчтүн сыртын кургак, мамыксыз чүпүрөк менен акырын тазалаңыз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз. Тазалоодон мурун электр кубатынан ажыратылганын текшериңиз.
- Туташуу текшерүү: Periodically check the tightness of the terminal screws, especially after initial installation and during routine electrical system checks.
If any damage or malfunction is observed, the circuit breaker should be replaced by a qualified electrician.
6. Кыйынчылыктарды
This section provides guidance for common issues encountered with circuit breakers.
6.1 Circuit Breaker Trips Frequently
- Ашыкча жүктөө: The most common cause. Disconnect some appliances or devices from the circuit.
- Кыска туташуу: A direct connection between live and neutral/ground wires. This requires immediate attention from a qualified electrician to identify and repair the fault.
- Бузулган шайман: An appliance connected to the circuit may be faulty and drawing excessive current. Unplug all appliances and plug them back in one by one to identify the culprit.
- Бошоң байланыштар: Loose wiring connections can cause arcing and heat, leading to tripping. Have a qualified electrician inspect and tighten all connections.
6.2 Circuit Breaker Will Not Reset
- Туруктуу ката: If the underlying overload or short circuit condition still exists, the breaker will immediately trip again when you try to reset it. Do not force it.
- Ички зыян: The circuit breaker itself may be damaged internally. If no fault is found in the circuit and the breaker still won't reset, it likely needs replacement.
Эгер көйгөйдү чече албасаңыз, жардам алуу үчүн квалификациялуу электрикке кайрылыңыз.
7. Техникалык шарттар
Key technical specifications for the ABB S203-C32 Circuit Breaker:
| Өзгөчөлүк | Нарк |
|---|---|
| Бренд | ABB |
| Модель номери | S203-C32 |
| ASIN | B000VG0Q4I |
| Поляктардын саны | 3 |
| Учурдагы рейтинг | 32 Ampere |
| Breaker түрү | Стандарт |
| Монтаж түрү | DIN темир жол |
| Продукциянын өлчөмдөрү | 6.9D x 5.3W x 8.8H см (6.9 x 5.25 x 8.8 см) |
| Салмагы | 100 г |
| Өндүрүүчү токтотулган | Жок |
| Биринчи жеткиликтүү күн | 15-январь, 2020-жыл |
| EU Spare Part Availability | 1 жыл |
| GTIN | 4016779468305 |
Figure 6: Product dimensions of the ABB S203-C32.
8. Кепилдик жана колдоо
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. ABB products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, product inquiries, or service, please contact ABB customer service or visit the official ABB website. Ensure you have your product model number (S203-C32) and any relevant purchase information ready when seeking support.
