Oatey 30796 Кызгылт көк түстөгү праймер тазалоочу каражатты колдонуу боюнча колдонмо

1. Продукт бүтүп калдыview

The Oatey 30796 Purple Primer Cleaner is specifically formulated for preparing PVC and CPVC pipes and fittings for solvent welding. This product effectively removes surface dirt, grease, and grime, while simultaneously softening the pipe surface to ensure a strong, reliable bond. Its purple tint provides visual confirmation of application, aiding in proper coverage.

This primer meets Lo-VOC (Low Volatile Organic Compound) requirements, including California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40, and other environmental standards.

Image 1.1: Oatey 30796 Purple Primer Cleaner in a 16 fl oz can.

Image 1.2: The primer can with its integrated applicator brush.

Image 1.3: The primer is suitable for both PVC and CPVC pipe types.

Image 1.4: Visual representation of purple primer applied to a pipe section.

Image 1.5: The product meets various industry standards for quality and environmental compliance.

Image 1.6: Key applications and features of the primer, including suitability for DWV and drinking water systems.

2. Коопсуздук маалыматы

DANGER/PELIGRO: Highly flammable liquid and vapor. Causes serious eye irritation. Harmful if swallowed. May be fatal if swallowed and enters airways. May cause drowsiness or dizziness. May cause respiratory irritation.

Read and understand all instructions and safety precautions before use. Always check local codes for acceptability of this product.

2.1 Жалпы сактык чаралары

• Ысыктан, учкундардан, ачык оттон жана ысык беттерден алыс кармаңыз. Тамеки чегүүгө болбойт.
• Use only in a well-ventilated area. Ensure adequate ventilation to prevent vapor accumulation.
• Wear appropriate personal protective equipment (PPE), including protective gloves, protective clothing, eye protection, and face protection.
• Avoid breathing vapors. If ventilation is inadequate, wear respiratory protection.
• Do not ingest. Wash thoroughly after handling.
• Колдонулбаган учурда контейнерди бекем жабык кармаңыз.
• Store in a cool, dry, well-ventilated place.

2.2 Биринчи жардам көрсөтүү чаралары

• Жутулган болсо: Дароо Ууланууну көзөмөлдөө борборуна же дарыгерге кайрылыңыз. Кустурбаңыз.
• Эгерде дем алган болсо: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms, call a Poison Control Center or doctor.
• If On Skin (or Hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
• Эгерде көзгө: Бир нече мүнөт суу менен этияттык менен чайкаңыз. Эгерде бар болсо жана оңой эле алып салууга мүмкүн болсо, контакт линзаларды алып салыңыз. Чайкоону улантыңыз. Эгерде көздүн кыжырдануусу улана берсе, медициналык кеңеш/жардам алыңыз.

Image 2.1: Detailed safety warnings and instructions from the product label (English side).

Image 2.2: Detailed safety warnings and instructions from the product label (Spanish side).

3. Орнотуу жана даярдоо

Proper preparation is crucial for a successful solvent weld. Follow these steps before applying the primer and cement.

3.1 Керектүү инструменттер жана материалдар

• Oatey 30796 Purple Primer Cleaner
• Appropriate PVC or CPVC solvent cement (ensure compatibility with pipe material)
• Түтүк кескич же темир араа
• Deburring tool or utility knife
• Таза чүпүрөктөр
• Өлчөөчү лента жана маркер
• Channel locks (optional, for opening stubborn cans)

3.2 Workspace Preparation

• Ensure the work area is well-ventilated to disperse fumes.
• Protect surrounding surfaces from spills or drips.
• Ensure the temperature is between -15°F and 110°F (-26°C and 43°C) for optimal performance.

3.3 Pipe and Fitting Preparation

1. Cut the pipe ends square using a pipe cutter or hacksaw.
2. Remove all burrs and shavings from the inside and outside edges of the pipe using a deburring tool or utility knife.
3. Dry fit the pipe and fitting together to ensure proper alignment and that the pipe can enter the fitting socket to the desired depth. The pipe should easily go 1/3 of the way into the fitting.
4. If the primer can is difficult to open, use channel locks to securely grip and twist the lid.

Image 3.1: Using channel locks to open the primer can securely.

4. Колдонуу боюнча нускамалар (колдонмо)

Follow these steps carefully for effective priming and solvent welding. Always apply solvent cement immediately after priming while the primer is still wet.

1. Apply Primer to Pipe: Using the applicator brush attached to the lid, apply a generous and even coat of Oatey Purple Primer Cleaner to the outside of the pipe end. Ensure the primer covers an area equal to the depth of the fitting socket.
2. Apply Primer to Fitting: Immediately after priming the pipe, apply a coat of primer to the inside of the fitting socket. Ensure complete coverage of the mating surfaces.
3. Apply Solvent Cement: While the primer is still wet, apply a liberal, even coat of the appropriate solvent cement to both the primed pipe end and the inside of the fitting socket. Refer to the solvent cement manufacturer's instructions for specific application details.
4. Join Pipe and Fitting: Quickly insert the pipe into the fitting socket with a quarter-turn twist until the pipe bottoms out. Hold the joint firmly for at least 30 seconds to ensure initial set and prevent the pipe from backing out.
5. Ашыкчасын аарчыңыз: Wipe off any excess cement from the joint immediately with a clean rag.
6. Айыруу убактысы: Allow the joint to cure according to the solvent cement manufacturer's recommendations before pressure testing or placing the system into service.

5. Техникалык тейлөө жана сактоо

Proper maintenance and storage will ensure the longevity and effectiveness of your Oatey Purple Primer Cleaner.

• Сактагыч: Store the product in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and ignition sources. Keep out of reach of children and pets.
• Container Integrity: Keep the container tightly closed when not in use to prevent evaporation of solvents and maintain product effectiveness.
• Жоюу: Dispose of empty containers and any unused product in accordance with all local, state, and federal regulations for hazardous waste. Do not pour down drains or dispose of with household waste.
• Applicator Care: After use, ensure the applicator brush is free of excess primer before closing the can. If the brush hardens, it may be cleaned with a suitable solvent or replaced.

6. Кыйынчылыктарды

While Oatey Purple Primer Cleaner is designed for reliable performance, issues can arise from improper application or environmental factors.

• Issue: Primer does not soften pipe surface.
  Чечим: Ensure the primer is fresh and has not evaporated due to an improperly sealed lid. Verify the ambient temperature is within the recommended range (-15°F to 110°F). Apply a more generous coat.
• Issue: Inadequate purple tint visible.
  Чечим: Apply a second coat of primer to ensure full coverage. The purple tint is for visual confirmation; ensure the surface is adequately softened regardless of tint intensity.
• Issue: Joint failure or leaks after curing.
  Чечим: This is typically due to improper solvent welding, not the primer itself. Ensure the pipe and fitting surfaces were clean, properly primed, and that solvent cement was applied immediately while the primer was wet. Verify sufficient cement was used and the joint was held firmly during initial set. Disassemble, clean, re-prime, and re-cement if necessary.

7. Техникалык шарттар

8. Кепилдик жана колдоо

8.1 Кепилдик маалыматы

This Oatey product comes with a 1 жылдык чектелген кепилдик. For specific details regarding coverage and terms, please refer to the warranty documentation provided with your purchase or contact Oatey customer service.

8.2 Кардарларды колдоо

For technical assistance, product inquiries, or support, please visit the official Oatey website or contact their customer service department. You can find more information about Oatey products and support options at the Oatey Store on Amazon.